Beagle Board - beagleboard.org

BeagleBoard Hardware Design

Please read the release notification that was given on the mailing list.

These design materials are *NOT SUPPORTED* and DO NOT constitute a reference design. Only “community” support is allowed via resources at BeagleBoard.org/discuss.

THERE IS NO WARRANTY FOR THE DESIGN MATERIALS, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE DESIGN MATERIALS “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE DESIGN MATERIALS IS WITH YOU. SHOULD THE DESIGN MATERIALS PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

We mean it, these design materials may be totally unsuitable for any purposes.

It would be greatly appreciated if you did not use the BeagleBoard.org logo on your products, but feel free to reference BeagleBoard.org.

AM335x BeagleBone

BealgeBone Black

BeagleBone (original) latest

BeagleBone Rev A3

DM3730 BeagleBoard-xM

xM Rev C

Here is a zip file with all of the xM Rev C design files.

xM Rev A3 (Only Rev B change is processor revision)

The original plan was to increase the memory size for rev B, but it was decided that a price reduction was a better way to spend the savings available after ramping the production.

xM Rev A2

OMAP3530 BeagleBoard

Rev C5

  • The only change to the BOM is the RAM: details

Rev C4

Rev C3 (Updated)

Rev C3

Rev C2

Rev B7

AM3517 CraneBoard

The AM3517 is much like the OMAP3530, but includes on-chip 3.3V I/Os, Ethernet, CAN, and USB PHY. These design materials include support for power-over-Ethernet.

Note: These materials were designed by Mistral, so please don't ask Gerald questions about them.

Rev B


Last updated by jkridner on Thu Dec 05 2013 03:11:12 GMT-0000 (UTC).
6455