#beagle IRC Log on BeagleBoard.org

Join the chat at beagleboard.org/chat

IRC Log for 2008-08-01

Timestamps are in UTC.

  1. [00:13:12] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  2. [00:22:51] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  3. [00:24:47] * Beagle0 (n=Beagle0@dhcp-187-84.harvard.edu) has joined #beagle
  4. [00:24:51] <Beagle0> hello all
  5. [00:25:21] <Beagle0> this may have been asked before, but does anyone know if its possible to run flash player on the beagle board?
  6. [00:29:51] * paul_pwsan (n=paul@utopia.booyaka.com) has left #beagle
  7. [00:32:28] <Crofton> Beagle0, not sure about that
  8. [00:32:36] <Crofton> koen, has some opinions :)
  9. [00:34:11] <Crofton> sakoman, I am 99% certain that I have copied over a new MLO without needing to re-flash
  10. [00:34:54] <Beagle0> thanks crofton
  11. [00:34:59] <ds2> Beagle0: possible, yes.
  12. [00:35:13] <Beagle0> any idea what it would take (beagle newbie)
  13. [00:35:14] <ds2> why would someone what to is a better question
  14. [00:35:30] <Beagle0> looking to make a flash-based photo frame
  15. [00:35:31] <Crofton> there is gnash and swf-something
  16. [00:35:51] <ds2> lawyers, a few suitcases of cash plus some groveling before the adobe folks =)
  17. [00:35:57] <Crofton> I do not do any flash stuff though
  18. [00:36:04] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  19. [00:36:10] <Beagle0> ok...well is it possible to get a gnash player for beagle?
  20. [00:36:35] <ds2> that should work, it is mainly the integration with a browser that needs to be worked on
  21. [00:36:52] <Beagle0> im mainly interested in a standalone player
  22. [00:37:16] <ds2> if you got a workable userland, I think it should just work
  23. [00:37:36] <ds2> as long as it is something that gnash can understand
  24. [00:37:55] <Beagle0> thanks ds2
  25. [00:38:39] <ds2> Beagle0: the gnash folks I think said it already runs on the Z and that's a armv5te (Xscale)... I don't thinkt hey are using the Xscale extensions so basic ARM stuff should just work
  26. [00:39:06] <Beagle0> ok...another dumb question: does anyone know of any cheap lcds i can use with the beagle?
  27. [00:39:14] <Beagle0> looking for like 7-10"
  28. [00:39:18] <Crofton> there are OE recipes for both options to the best of my knowledge
  29. [00:39:28] <Beagle0> what is OE?
  30. [00:39:48] <Crofton|work> OpenEmbedded
  31. [00:40:14] <Beagle0> ah, thans
  32. [00:41:21] <Beagle0> soo...any suggestions on cheap lcds?
  33. [00:41:30] <ds2> NTSC LCDs come up cheap often
  34. [00:46:46] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Success)
  35. [00:51:49] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  36. [01:01:30] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  37. [01:13:35] * Beagle9 (n=Beagle9@cpe-76-184-44-115.tx.res.rr.com) has joined #beagle
  38. [01:14:46] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  39. [01:17:13] * Beagle9 (n=Beagle9@cpe-76-184-44-115.tx.res.rr.com) Quit (Client Quit)
  40. [01:24:25] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  41. [01:24:38] * Beagle0 (n=Beagle0@dhcp-187-84.harvard.edu) Quit ()
  42. [01:45:51] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  43. [01:55:31] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  44. [01:56:49] * Beagle3 (n=Beagle3@pool-72-70-7-90.bstnma.east.verizon.net) has joined #beagle
  45. [02:07:58] * cajaka (i=dirc@chil-nrp1-cs-1345.vdsl.bright.net) Quit ("dIRC IRC Client - www.dragonmount.net/dirc/")
  46. [02:16:56] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  47. [02:26:23] * jkridner|work (n=a0321898@nat/ti/x-670324d4c8ccf75d) has joined #beagle
  48. [02:27:02] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  49. [02:32:11] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  50. [02:41:50] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  51. [02:43:49] * Beagle3 (n=Beagle3@pool-72-70-7-90.bstnma.east.verizon.net) Quit (Read error: 110 (Connection timed out))
  52. [02:53:19] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  53. [02:54:28] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  54. [03:04:27] <jkridner> hi khasim
  55. [03:09:05] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  56. [03:09:45] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  57. [03:19:24] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  58. [03:19:46] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  59. [03:23:43] <sakoman_> Crofton: I started with a fresh dos format and was able to use my MLO image on MMC
  60. [03:24:11] <sakoman_> I was also able to write it to flash and use it that way too
  61. [03:24:39] <sakoman_> So I am not sure why it isn't working for you :-(
  62. [03:31:13] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) Quit ("Trillian (http://www.ceruleanstudios.com")
  63. [03:32:28] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Success)
  64. [03:42:38] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  65. [03:52:36] * JoeBorn (n=jborn@adsl-75-3-1-49.dsl.chcgil.sbcglobal.net) Quit ("open.neurostechnology.com")
  66. [03:59:25] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  67. [03:59:47] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  68. [04:09:28] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  69. [04:10:47] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  70. [04:15:37] * Olipro (n=Olipro@unaffiliated/olipro) Quit (Connection timed out)
  71. [04:17:05] * rustyhammer (n=gideon@202.155.248.66) has joined #beagle
  72. [04:20:26] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  73. [04:20:47] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  74. [04:26:19] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  75. [04:30:27] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  76. [04:30:48] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  77. [04:40:28] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  78. [04:40:48] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  79. [04:42:21] * dirk2 (n=dirk@F3134.f.strato-dslnet.de) has joined #beagle
  80. [04:50:27] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  81. [04:50:49] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  82. [05:00:30] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  83. [05:00:42] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  84. [05:10:22] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Success)
  85. [05:10:43] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  86. [05:20:22] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  87. [05:33:36] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  88. [05:39:59] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  89. [05:41:17] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  90. [05:49:57] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  91. [05:51:15] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  92. [05:59:35] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  93. [05:59:54] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  94. [06:01:12] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  95. [06:08:08] * min (n=ubuntu@pd95b4498.dip0.t-ipconnect.de) Quit ("using sirc version 2.211+KSIRC/1.3.12")
  96. [06:09:50] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  97. [06:11:09] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  98. [06:16:45] * dirk2 (n=dirk@F3134.f.strato-dslnet.de) has left #beagle
  99. [06:19:49] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  100. [06:21:06] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  101. [06:28:44] * valhalla (n=valhalla@81-174-23-27.dynamic.ngi.it) has joined #beagle
  102. [06:30:46] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Success)
  103. [06:33:20] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  104. [06:41:58] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  105. [06:43:16] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  106. [06:44:49] * trickie|work (n=trickie@basesoft.xs4all.nl) has joined #beagle
  107. [06:51:55] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  108. [06:53:03] * Viral_Sachde (n=Viral_Sa@122.167.139.251) has joined #beagle
  109. [06:53:12] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  110. [07:01:50] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  111. [07:07:39] * RogerMonk (n=a0740758@nat/ti/x-4fe10d2c89d4e2e5) has joined #beagle
  112. [07:11:58] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  113. [07:22:40] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  114. [07:31:07] * rustyhammer (n=gideon@202.155.248.66) Quit ("Leaving.")
  115. [07:35:55] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  116. [07:36:20] * borg_ (n=olaf@80.149.17.21) Quit (Read error: 110 (Connection timed out))
  117. [07:46:35] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  118. [07:51:39] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  119. [08:01:18] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  120. [08:14:35] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  121. [08:24:14] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  122. [08:30:53] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  123. [08:40:32] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  124. [08:53:48] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  125. [09:03:28] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  126. [09:11:44] * incandescant (n=incandes@foo.stupids.org) Quit ("leaving")
  127. [09:11:51] * incandescant (n=incandes@foo.stupids.org) has joined #beagle
  128. [09:16:41] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  129. [09:32:27] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  130. [09:45:42] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  131. [09:55:22] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Success)
  132. [10:13:33] * alphaone (n=alphaone@a064.apm.etc.tu-bs.de) has left #beagle
  133. [10:16:46] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  134. [10:20:02] * methril|away is now known as methril
  135. [10:25:59] * dcordes (n=dcordes@unaffiliated/dcordes) has joined #beagle
  136. [10:25:59] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  137. [10:31:29] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  138. [10:41:10] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  139. [10:54:23] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  140. [11:04:02] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  141. [11:06:24] <dcordes> jkridner|work: out of US online orders work again. placed mine yesterday
  142. [11:21:37] <Crofton|work> the website still shows 1 in stock
  143. [11:22:00] <Crofton|work> makes it hard for my amateur sales figure generation :)
  144. [11:25:25] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  145. [11:25:25] <jkridner> dcordes: Great!
  146. [11:25:33] <Crofton> gm
  147. [11:25:38] <jkridner> gm
  148. [11:27:41] <Crofton> sakoman, the md5sum of the MLO you sent is 4ec592326ff64c623445e2af78e39313
  149. [11:27:48] <Crofton> can you check yours just in case
  150. [11:28:42] <dcordes> Crofton: only one? looks like I've been lucky :D
  151. [11:29:08] <Crofton> I do not think have ever shown the actual number :)
  152. [11:31:00] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  153. [11:31:26] <Crofton> yay, congress is going on vacation!
  154. [11:32:21] * Crofton wonders if the Belgians ever sorted out their government
  155. [11:44:17] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  156. [11:50:25] <Crofton> sakoman, I just re-copied a file called MLO-revb onto the sd card and it boots :(
  157. [11:53:56] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  158. [11:57:05] * JuanG (n=Juan@nat/ti/x-29066a909505343d) has joined #beagle
  159. [11:57:13] * JuanG (n=Juan@nat/ti/x-29066a909505343d) has left #beagle
  160. [12:10:07] * cbrake_away is now known as cbrake
  161. [12:12:14] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  162. [12:16:11] * shoragan (n=shoragan@debian/developer/shoragan) Quit ()
  163. [12:17:47] * shoragan (n=shoragan@debian/developer/shoragan) has joined #beagle
  164. [12:19:26] * shoragan (n=shoragan@debian/developer/shoragan) Quit (Remote closed the connection)
  165. [12:21:53] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  166. [12:23:43] * gaipo (n=kaj@adsl-215-243-232.kymp.net) Quit ("Ex-Chat")
  167. [12:32:03] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  168. [12:41:42] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  169. [12:43:39] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
  170. [12:52:33] * trickie|work (n=trickie@basesoft.xs4all.nl) Quit ("Leaving")
  171. [12:54:58] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  172. [13:05:05] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  173. [13:17:52] * Olipro (n=Olipro@unaffiliated/olipro) has joined #beagle
  174. [13:18:30] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  175. [13:28:10] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  176. [13:28:32] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  177. [13:34:07] * Olipro_ (n=Olipro@unaffiliated/olipro) has joined #beagle
  178. [13:35:36] * Olipro__ (n=Olipro@unaffiliated/olipro) has joined #beagle
  179. [13:36:17] * methril (n=Methril@213.27.233.98) Quit (Remote closed the connection)
  180. [13:38:11] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  181. [13:39:22] * Olipro (n=Olipro@unaffiliated/olipro) Quit (Nick collision from services.)
  182. [13:39:24] * Olipro__ is now known as Olipro
  183. [13:42:47] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  184. [13:43:19] * BThompson (n=BThompso@nat/ti/x-6437531bb67e0b4c) has joined #beagle
  185. [13:50:25] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  186. [13:52:29] * Olipro_ (n=Olipro@unaffiliated/olipro) Quit (Connection timed out)
  187. [14:01:24] * rsalveti (n=salveti@189.70.143.203) Quit (Read error: 110 (Connection timed out))
  188. [14:03:41] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  189. [14:13:20] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  190. [14:15:24] * rsalveti (n=salveti@200.184.118.132) has joined #beagle
  191. [14:19:40] * Hidus (n=hidus@206-223-177-6.beanfield.net) has joined #beagle
  192. [14:19:42] <sakoman_> Crofton: strange. could you try the images at: http://www.sakoman.net/feeds/omap3/glibc/images/beagleboard/
  193. [14:20:22] <sakoman_> here's what I get with MLO on mmc and u-boot in nand: http://pastebin.com/m58a1b114
  194. [14:21:15] <sakoman_> This is with a standard 1GB MMC card
  195. [14:21:57] <jkridner> are you _trying_ to boot u-boot from NAND using MLO on MMC?
  196. [14:21:59] <sakoman_> It seems that when I try to use an 8GB card, neither MLO-revb nor my MLO work
  197. [14:22:07] <jkridner> kind of an odd combo. just to test MLO?
  198. [14:22:12] <sakoman_> yes
  199. [14:22:35] <sakoman_> I wanted to make sure that it works from MMC and written to nand
  200. [14:22:59] <sakoman_> Crofton: says it isn't working for him, so we're trying to figure out why
  201. [14:26:25] <sakoman_> jkridner: the MLO from my git is supposed to work from either place, and once loaded will attempt to load u-boot from mmc, onenand, and nand in that order
  202. [14:26:36] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  203. [14:27:09] <jkridner> k.
  204. [14:28:17] <sakoman_> jkridner: give it a try if you are feeling adventurous :-)
  205. [14:33:13] <sakoman_> still needs some work, but it is getting closer
  206. [14:36:01] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  207. [14:44:45] <sakoman_> Crofton: I found a bug that will keep my MLO from loading u-boot from MMC. The rom boot loader should load and launch MLO itself though. At that point it will only load u-boot from onenand or nand. I'll fix that momentarily
  208. [14:46:21] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  209. [14:47:22] <Crofton> sakoman, thanks
  210. [14:53:59] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  211. [14:57:52] <Crofton|work> Glad to know I am not crazy
  212. [15:03:49] * Olipro_ (n=Olipro@unaffiliated/olipro) has joined #beagle
  213. [15:06:00] <sakoman_> Crofton: well, you should see the MLO running from MMC
  214. [15:06:10] <sakoman_> It sounded like that was not the case
  215. [15:06:15] <Crofton> no
  216. [15:06:42] <sakoman_> no, you didn't see it running from MMC?
  217. [15:07:04] <Crofton> I just see an xloader message
  218. [15:07:12] <sakoman_> with the image linked this morning you can tell by the version string, it will be 1.41sms
  219. [15:07:13] <Crofton> does that come from your MLO?
  220. [15:07:59] <sakoman_> If you don't have a MLO in nand, then that message did indeed come from my MLO
  221. [15:07:59] <Crofton> try the one from the AM's lik?
  222. [15:08:31] <sakoman_> If you do have a MLO in nand, then you wouldn't be able to tell since they both print the same thing :-)
  223. [15:08:43] <jkridner|work> http://pastebin.com/m48f92cb6
  224. [15:08:47] <sakoman_> But this AM's MLO prints a unique string
  225. [15:08:59] <jkridner|work> I have a u-boot in NAND and your MLO seems to work nicely.
  226. [15:09:07] <jkridner|work> I'll try putting a u-boot in MMC now.
  227. [15:09:25] <sakoman_> Jkridner|work: don't bother just yet!
  228. [15:09:46] <sakoman_> found a bug where mmcboot only happens on systems that report managed nand
  229. [15:09:49] <Crofton|work> Texas Instruments X-Loader 1.41sms
  230. [15:09:55] <sakoman_> just testing a fix now
  231. [15:10:17] <sakoman_> Crofton|work: excellent, so my next one should work (fingers crossed)
  232. [15:10:24] <Crofton|work> All these different names for the name thing are confusing :)
  233. [15:11:08] <sakoman_> Crofton|work: I agree
  234. [15:11:39] <sakoman_> I'll change my git so the message is a lttle more clear about what you are running
  235. [15:15:23] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  236. [15:16:14] * Viral_Sachde (n=Viral_Sa@122.167.139.251) has left #beagle
  237. [15:17:38] <sakoman_> jkridner: hopefully this new MLO will eliminate the need for having multiple MLO's for beagle (different for MMC vs nand vs onenand if you ever want to build onenand beagles again)
  238. [15:18:06] <jkridner> k. did you get inventive on making it all fit?
  239. [15:18:27] <sakoman_> jkridner: it is still only 17K
  240. [15:18:35] * Olipro (n=Olipro@unaffiliated/olipro) Quit (Read error: 110 (Connection timed out))
  241. [15:18:50] <jkridner> for Beagle, my strategy has been to make things as predictable as possible for the user... that is, it will boot as you have configured the NAND unless you specifically do something to change that.
  242. [15:19:24] <jkridner> whatever the strategy is, we need to make sure that people cannot easily "forget" to do something. That is why Beagle has no jumpers or switches (other than momentary).
  243. [15:20:13] <sakoman_> with this MLO it will look for u-boot in the following order: mmc, onenand, nand
  244. [15:20:15] <jkridner> anyway, a single MLO will be quite welcome.
  245. [15:20:40] <sakoman_> I'm thinking of adding serial as a fallback if it can't find u-boot in the other places
  246. [15:20:51] <sakoman_> shouldn't take much code
  247. [15:21:03] <jkridner> if someone forgets that they have a u-boot on the MMC card, they could be surprised when it doesn't boot from NAND, but I think that is an odd corner-case.
  248. [15:21:21] <jkridner> cannot wait until we have a USB-enabled u-boot.
  249. [15:21:31] <sakoman_> Won't be a surprise because it prints a message saying where it found u-boot
  250. [15:22:05] <sakoman_> Well, it might be a surprise, but it won't be a mystery :-)
  251. [15:26:20] * Olipro_ is now known as Olipro
  252. [15:28:06] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  253. [15:28:28] <jkridner> surprise is better than mystery, but some mysteries require scrolling back in the buffer to solve.
  254. [15:28:41] <jkridner> er, surprises.
  255. [15:28:47] <jkridner> ah, you probably know what I mean.
  256. [15:33:02] * shoragan (n=shoragan@debian/developer/shoragan) has joined #beagle
  257. [15:41:21] <sakoman_> jkridner: yes, I do :-)
  258. [15:41:59] <sakoman_> hmm . . . now a bug in fatload :-(
  259. [15:42:06] <sakoman_> why can't it ever be easy!
  260. [15:53:13] <jkridner> hmmm.... download links to big buck bunny seem to be broken.
  261. [15:57:40] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  262. [16:07:19] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  263. [16:09:26] <sakoman_> jkridner: do you need a copy? I think I have a few different sizes here
  264. [16:09:59] <jkridner> I'm looking for the version that was used for the LRL UK demo.
  265. [16:10:19] <sakoman_> jkridner: have no idea which one that was :-)
  266. [16:11:29] <sakoman_> I've got 480p_AVC_FW33.mp4, 320x180.mp4, and Portable_p272_native_res_FW3xx.mp4
  267. [16:11:43] <koen> good morning all
  268. [16:12:19] <sakoman_> gm koen!
  269. [16:12:23] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  270. [16:12:48] <koen> any cool beagleboard news today?
  271. [16:13:26] * koen spots a onenand patch on linux-omap ml
  272. [16:22:03] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  273. [16:22:43] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  274. [16:23:31] <jkridner|work> big news today is international orders. :)
  275. [16:23:44] <jkridner|work> k, there are some technical news items too. :)
  276. [16:24:17] <jkridner|work> I'm headed into work and will look to download some big buck bunny vids from there.
  277. [16:28:08] * jkridner|work (n=a0321898@nat/ti/x-670324d4c8ccf75d) Quit ("Leaving.")
  278. [16:31:48] * hagisbasheruk (n=hagisbas@cpc1-clyd1-0-0-cust187.renf.cable.ntl.com) has joined #beagle
  279. [16:31:48] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  280. [16:32:29] * koen builds a kernel with Pauls v3 patches
  281. [16:44:45] <koen> http://amethyst.openembedded.net/~koen/beagleboard/demo/uImage-2.6.26-r53-beagleboard.bin
  282. [16:44:55] <koen> for people wanting to help debug the serial hang
  283. [16:45:10] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  284. [16:48:39] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  285. [16:51:45] * JoeBorn (n=jborn@dsl017-022-252.chi1.dsl.speakeasy.net) has joined #beagle
  286. [16:51:52] * hagisbasheruk (n=hagisbas@cpc1-clyd1-0-0-cust187.renf.cable.ntl.com) Quit ("Leaving")
  287. [16:54:49] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  288. [17:00:45] * jkridner|work (n=a0321898@nat/ti/x-925875cfbb05235c) has joined #beagle
  289. [17:08:03] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  290. [17:18:44] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  291. [17:19:17] <koen> jkridner|work: I got some emails from dutch companies buying a bunch of boards to do stuff on
  292. [17:19:25] <koen> jkridner|work: seems the beagle is selling really well :)
  293. [17:23:23] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  294. [17:26:10] * koen declares it's beer o'clock
  295. [17:26:28] <Crofton|work> someone else on the gnu radio list bought a beagle
  296. [17:26:37] <Crofton|work> we need to get some stuff working :)
  297. [17:26:56] <koen> didn't montevista already fix all the SDR stuff?
  298. [17:26:57] <mru> koen: on fridays, beer o'clock is at noon
  299. [17:27:14] <Crofton|work> damn beer thirty here
  300. [17:27:26] <koen> Crofton|work: their EDC blurb made it seem so
  301. [17:27:50] <Crofton|work> http://www.downtownblacksburg.com/steppinout.html
  302. [17:27:57] <Crofton|work> heh
  303. [17:27:58] <mru> Crofton|work: or half beer as we'd say here in england
  304. [17:28:18] <Crofton|work> I should have stayed downtown drinking beer
  305. [17:31:02] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  306. [17:31:38] <Crofton|work> http://hillbillysavants.blogspot.com/2006/07/steppin-out.html
  307. [17:32:03] <Crofton|work> some local history :)
  308. [17:32:35] * koen reads "culinary arts" and fetches a piece of steak
  309. [17:33:10] <Crofton|work> mostly, we try get a table at the window of a local bar and watch people walk by
  310. [17:35:44] * dcordes (n=dcordes@unaffiliated/dcordes) Quit ("leaving")
  311. [17:44:17] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  312. [17:53:09] * RogerMonk (n=a0740758@nat/ti/x-4fe10d2c89d4e2e5) Quit (Remote closed the connection)
  313. [17:53:58] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  314. [17:56:00] * mru (n=mru@thrashbarg.mansr.com) Quit (Remote closed the connection)
  315. [17:56:35] * mru (n=mru@thrashbarg.mansr.com) has joined #beagle
  316. [18:03:08] <koen> uptime 1 hour, still no serial hang
  317. [18:04:30] * Crofton plays the jeopardy music
  318. [18:09:18] * koen hopes tony returns ASAP
  319. [18:09:29] <Crofton> amen
  320. [18:09:47] <Crofton> I went looking for his vacation email the other day
  321. [18:15:20] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  322. [18:20:20] * sakoman_ would love a month vacation!
  323. [18:21:07] * koen has had 5 days of vacation this summer
  324. [18:21:28] <koen> in theory I should have 10 weeks of vacation from uni
  325. [18:23:14] * Crofton needs to figure out what the deal is with his shoulder, it is hard to vacation with a sucky right arm
  326. [18:25:01] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  327. [18:25:23] * jkridner|work has about 6 weeks of vacation a year, *in theory*.
  328. [18:25:34] <jkridner|work> (never sees it)
  329. [18:25:43] <prpplague> jkridner|work: wow, that is positively european of you
  330. [18:26:07] <prpplague> jkridner|work: don't hear of too many employees in the states having that much time
  331. [18:38:16] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  332. [18:47:23] * rsalveti (n=salveti@200.184.118.132) Quit (Remote closed the connection)
  333. [18:47:31] * rsalveti (n=salveti@200.184.118.132) has joined #beagle
  334. [18:47:55] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  335. [19:03:46] <koen> up 2 hours, no serial hang
  336. [19:30:41] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  337. [19:37:39] * BThompson (n=BThompso@nat/ti/x-6437531bb67e0b4c) Quit (Remote closed the connection)
  338. [19:40:20] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  339. [19:51:30] <sakoman_> Crofton: found the MLO mmc boot issue. It was another compiler dependent infinite loop :-(
  340. [19:51:33] * thng (n=thng@84.100.10.193) has joined #beagle
  341. [19:53:41] * orcas (n=orcas@169.230.87.121) has joined #beagle
  342. [19:53:58] <Crofton> ug
  343. [19:56:18] * zarquin (n=zarquin@bright-snat.ucc.asn.au) Quit (Read error: 110 (Connection timed out))
  344. [20:03:22] * orcas (n=orcas@169.230.87.121) Quit (Read error: 104 (Connection reset by peer))
  345. [20:03:41] <koen> 3 hours running, still no serial hang
  346. [20:07:10] <sakoman_> Crofton: I'll ping you when the autobuilder has new versions available
  347. [20:07:25] <sakoman_> trying to do 3 things at once :-(
  348. [20:07:54] <sakoman_> so hopefully my fix works the first time
  349. [20:13:52] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) has joined #beagle
  350. [20:16:45] * orcas (n=orcas@169.230.87.121) has joined #beagle
  351. [20:17:30] <ds2> whweeeeeee my $8 HDMI-DVI-D cable works!
  352. [20:26:24] * orcas (n=orcas@169.230.87.121) Quit (Read error: 104 (Connection reset by peer))
  353. [20:31:28] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  354. [20:34:05] <koen> 3.5 hours running, still no serial hang
  355. [20:36:25] * paul_pwsan (n=paul@utopia.booyaka.com) has joined #beagle
  356. [20:36:58] <paul_pwsan> hello everyone
  357. [20:36:58] * cbrake is now known as cbrake_away
  358. [20:37:16] <paul_pwsan> just wanted to post one request for koen and anyone else looking at the serial hang issue:
  359. [20:38:16] <paul_pwsan> if the serial hang occurs, please send a sysrq-q (break + q, or ctrl-a f q in minicom) and please email the bottom section of the resulting output (the GPT register dump) to paul@pwsan.com
  360. [20:38:59] <Crofton> sakoman, no hurry, I am going to run out today messing with gnuradio
  361. [20:39:10] <Crofton> trying to get setup to play with NEON and gnuradio
  362. [20:39:18] <Crofton> but, I am hampered by being an idiot
  363. [20:41:09] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  364. [20:41:57] * valholl (n=valhalla@81-174-37-232.dynamic.ngi.it) has joined #beagle
  365. [20:43:12] <paul_pwsan> left my beagle board running overnight with the v3 patch set, it's been up now for 18 hours. it's printed two "GPTIMER missed match interrupt" messages, both of which happened when the console was idle
  366. [20:46:41] <paul_pwsan> did manage to get it to hang once before leaving it on overnight. probably a similar scenario to what dirk reported. will attempt to come up with a workaround for that also
  367. [20:48:03] * valhalla (n=valhalla@81-174-23-27.dynamic.ngi.it) Quit (Read error: 113 (No route to host))
  368. [20:50:07] * thng (n=thng@84.100.10.193) Quit ("Leaving")
  369. [20:54:25] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  370. [21:00:04] <koen> paul_pwsan: will post the output when/if it hangs
  371. [21:00:15] <jkridner|work> coming up to the end of the business day in the US. If anyone is going to LinuxWorld, be sure to come by and pick up the invites to the Jillian's event.
  372. [21:00:25] <paul_pwsan> koen: thx
  373. [21:00:39] <jkridner|work> We can talk about serial lockups and break out some boards to try things. ;)
  374. [21:01:04] <prpplague> jkridner|work: rusty herod with tincantools should come by your area at LWE
  375. [21:01:24] <jkridner|work> excellent.
  376. [21:01:42] <jkridner|work> btw, I'm not aware that anyone has gotten very far with OpenOCD...
  377. [21:02:04] <prpplague> jkridner|work: yea, from what i've heard there hasn't been any progress
  378. [21:02:11] <jkridner|work> I had a chat with some of the emulation folks last week and they gave me a doc that is meant to explain how to initially setup the scan chain...
  379. [21:02:23] <jkridner|work> it was meant to go into the TRM, but was set as a low priority.
  380. [21:02:34] <prpplague> jkridner: i was hope'n to be done with this project by the 15th, but i think its going to run a week or two more
  381. [21:02:47] <jkridner|work> if someone is really working on OpenOCD, they should contact me for an early version of the scan chain setup.
  382. [21:02:48] <ds2> jkridner: there is a ticket, card I need to get at the TI booth?
  383. [21:03:02] <prpplague> jkridner|work: ahh interesting
  384. [21:03:09] <jkridner|work> We'll let you in. :)
  385. [21:03:15] <prpplague> jkridner|work: i'll keep my ears open for anything
  386. [21:03:23] <jkridner|work> there are cards, but it just depends on how crowded it is on if they are needed.
  387. [21:03:37] <ds2> I'll be at the exhibits anyways
  388. [21:04:00] <ds2> might try to give the hammer folks a hard time since prpplague won't be there ;)
  389. [21:04:00] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  390. [21:04:23] <jkridner|work> come by the TI booth anyway and get your picture taken with Boris, if he makes it. (I can't believe someone is actually thinking about going in a dog suit.)
  391. [21:04:40] <prpplague> ds2: ha
  392. [21:04:54] <jkridner|work> prpplague: it is only 2 time zones away!
  393. [21:05:20] <ds2> I do need to find out how late the trains run
  394. [21:05:25] <prpplague> jkridner|work: couldn't get the time off, they are pushing this pda out the door asap
  395. [21:05:43] * koen reads somethng about dog suit
  396. [21:06:20] * koen wonders what a missing ehci port equates to in a dog suit
  397. [21:06:23] <koen> missing paw?
  398. [21:06:59] <Crofton|work> furries?
  399. [21:07:43] * koen has seen enough furries since LRL
  400. [21:08:37] <koen> 4 hours, no serial hang
  401. [21:08:41] <Crofton|work> heh
  402. [21:08:41] * koen heads to sleep
  403. [21:08:45] <Crofton|work> gn
  404. [21:08:55] <jkridner|work> some people only have certain skill sets.
  405. [21:09:13] * jkridner|work isn't sure what he meant by that.
  406. [21:09:30] * Crofton|work isn't sure either
  407. [21:09:32] * jkridner|work cannot translate missing ehci port to anaotomy
  408. [21:09:41] <jkridner|work> anatomy
  409. [21:09:58] * Beagle5 (n=Beagle5@200-161-14-111.dsl.telesp.net.br) has joined #beagle
  410. [21:09:58] <Crofton|work> go home :)
  411. [21:11:24] * valholl (n=valhalla@81-174-37-232.dynamic.ngi.it) Quit ("Leaving")
  412. [21:13:32] <jkridner|work> :)
  413. [21:13:50] <sakoman_> jkridner|work: sadly I won't be coming down to SFO next week
  414. [21:14:10] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  415. [21:14:16] <sakoman_> Too much work to do to spend 8 hours driving
  416. [21:16:44] <paul_pwsan> jkridner|work: yes, please do post any jtag-related documents or scan chain data somewhere
  417. [21:17:13] <koen> mru: armeb NAS boxes have faster networking (at least on ixp cores) when run in BE mode, although the difference is only a few percent
  418. [21:17:17] * koen really zzzz now
  419. [21:20:47] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  420. [21:44:58] <calculus> ds2: last train leaves SF, at midnight or so
  421. [21:46:09] * zarquin (n=zarquin@bright-snat.ucc.asn.au) has joined #beagle
  422. [21:46:29] <calculus> 12:01 according to the schedule here
  423. [21:50:22] <sakoman_> Crofton|work: the MLO in my feeds now seems to work for mmc boot
  424. [21:51:49] <sakoman_> I need to clean up some of the messages
  425. [21:52:23] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  426. [22:02:05] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  427. [22:11:04] * prpplague (n=dave@mail.americanmicrosystems.com) Quit ("Leaving")
  428. [22:14:25] * JoeBorn (n=jborn@dsl017-022-252.chi1.dsl.speakeasy.net) Quit (Read error: 110 (Connection timed out))
  429. [22:15:21] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  430. [22:24:37] * cian (n=cianh@cian.ws) has joined #beagle
  431. [22:25:00] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  432. [22:26:18] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  433. [22:34:57] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  434. [22:48:13] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  435. [22:51:15] * macneib (n=bmac@bas14-toronto12-1167995094.dsl.bell.ca) has joined #beagle
  436. [22:51:40] <macneib> hi everyone, have a small problem with my board
  437. [22:52:29] <macneib> powers up fine and i'm connecting through a serial cable and using kermit to connect
  438. [22:53:05] <macneib> boots fine, but i cannot input any commands. it seems to freeze @ OMAP3 beagleboard.org #
  439. [22:53:57] <ds2> macneib: set flow none before the connect
  440. [22:54:06] <ds2> macneib: I use kermit and the commands I use are:
  441. [22:54:19] <macneib> k 1 sec
  442. [22:54:25] <ds2> set line /dev/ttyS0; set speed 115200; set carr off; set flow none; connect
  443. [22:57:09] <macneib> i might go down in history as the biggest moron ever
  444. [22:57:16] <ds2> ?
  445. [22:57:23] <macneib> forgot set flow non
  446. [22:57:35] <ds2> heh
  447. [22:57:42] <ds2> it seems only certain boards need not
  448. [22:59:05] <macneib> nope didn't work
  449. [22:59:20] <jkridner|work> what serial adapter do you have?
  450. [22:59:25] <ds2> are you sure you are using the right adapter cable?
  451. [22:59:39] <ds2> got ohm meter/dmm to sort it out?
  452. [22:59:40] <macneib> it's a db9 pass through male to male
  453. [22:59:49] <macneib> back at the office
  454. [23:00:01] <ds2> no, the 10pin header to the DB-9 wiring has 2 defacto standards
  455. [23:00:26] <macneib> though it gives good data off the board
  456. [23:00:43] <ds2> macneib: you are trying it after restarting kermit right?
  457. [23:00:50] <macneib> 2 standards?
  458. [23:00:51] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  459. [23:00:54] <ds2> I found that if kermit is not restarted, things never work
  460. [23:01:03] <jkridner|work> yeah, AT/Everex is the right one for this board.
  461. [23:01:25] <jkridner|work> see http://beagleboard.org/hardware at the bottom for a link to the right serial adapter.
  462. [23:01:34] <ds2> heh.. the OTHER OMAP3 board use a different standard ;)
  463. [23:01:45] <jkridner|work> in addition to the serial adapter, you need to use a null-modem cable, not a straight through.
  464. [23:02:22] <jkridner|work> ds2: a couple of the others.
  465. [23:02:41] <macneib> ok so my equipment here isn't going to cut it
  466. [23:03:18] <ds2> I suspect if you got far enough to get the prompt, you have the right one
  467. [23:03:33] <ds2> when I used the one from another board, all I got was garbage, as if ground and TxD was swapped
  468. [23:03:42] <jkridner|work> it is possible TX is connected and RX is not.
  469. [23:03:56] <ds2> oh DOH that one would suck
  470. [23:03:57] <jkridner|work> remember, he's also not using a null modem, I believe.
  471. [23:03:58] <macneib> jkrinder: is that possible?
  472. [23:04:07] <macneib> that's true
  473. [23:04:12] <ds2> not using a NULL modem would result in no output at all
  474. [23:04:18] <ds2> cuz TxD would be driving TxD
  475. [23:04:28] <jkridner|work> the boards are all tested for RX/TX prior to shipping.
  476. [23:04:47] <macneib> yeah i know it's my equipment the board is working flawlessly
  477. [23:05:05] <jkridner|work> have you considered what would be connected if you had the Quant(?) serial adapter and a straight-through cable?
  478. [23:05:28] <macneib> i'm just surprised that i can connect, get data but can't write
  479. [23:05:36] <macneib> with the wrong cable
  480. [23:05:36] <jkridner|work> Digi-Key is working on stocking the serial adapters. They already sell the null modem cables.
  481. [23:10:26] <macneib> ok i'll pick this up again once i'm back at the office on monday night
  482. [23:10:30] <macneib> have a great weekend
  483. [23:10:33] <sakoman_> jkridner|work: the MLO issue is solved now. it was an infinite loop in mmc_stream_init.
  484. [23:10:41] <macneib> thanks for the help
  485. [23:10:50] * macneib (n=bmac@bas14-toronto12-1167995094.dsl.bell.ca) Quit ()
  486. [23:11:09] <sakoman_> same issue (same code in fact) that I ran into with u-boot
  487. [23:11:11] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  488. [23:20:52] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  489. [23:22:36] * diego is now known as diego_away
  490. [23:25:11] * paul_pwsan (n=paul@utopia.booyaka.com) has left #beagle
  491. [23:27:30] * jkridner|work (n=a0321898@nat/ti/x-925875cfbb05235c) Quit ("Leaving.")
  492. [23:34:07] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  493. [23:44:48] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  494. [23:47:24] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle
  495. [23:54:42] * KeyserSoze (n=Miles@67.107.206.170.ptr.us.xo.net) Quit ("Leaving")
  496. [23:56:04] * orcas (n=orcas@udp011884uds.ucsf.edu) Quit (Read error: 104 (Connection reset by peer))
  497. [23:56:16] * orcas (n=orcas@udp011884uds.ucsf.edu) has joined #beagle

These logs were automatically created by BeagleLogBot on irc.freenode.net using the Java IRC LogBot.

See http://microformats.org/wiki/mflogbot for more information.