#beagle IRC Log on BeagleBoard.org

Join the chat at beagleboard.org/chat

IRC Log for 2009-10-09

Timestamps are in UTC.

[00:00:25] * edufelipe (n=edufelip@189.4.72.143) has left #beagle
[00:01:06] * robclark (n=robclark@nat/ti/x-hcrqqknafykxzcbd) Quit (Remote closed the connection)
[00:02:44] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[00:03:49] <Crofton> sakoman, ping
[00:05:29] * Christos_N (n=Christos@ppp-94-66-54-32.home.otenet.gr) Quit ("Until we meet again")
[00:08:02] * robclark_ is now known as robclark
[00:08:30] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) Quit ()
[00:11:59] * mrc_001 (n=mrc_001@193.170.135.167) Quit ()
[00:12:00] * djlewis (i=4b0f4155@gateway/web/freenode/x-irqjzuyxaqcsqxgg) has joined #beagle
[00:12:53] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) Quit ()
[00:13:13] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[00:15:54] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) Quit (Client Quit)
[00:17:18] * felipec (n=felipec@a91-153-253-80.elisa-laajakaista.fi) Quit ("Ex-Chat")
[00:18:35] <sdh_> anybody have experience with real-world power draws of this board?
[00:19:12] <sdh_> according to the datasheet it looks like it should be about 5V*350mA or 1.75W peak
[00:19:21] <sdh_> it it much less at idle?
[00:24:04] <djlewis> sdh_: you might google for an article russ put up earlier this year.
[00:24:06] * _av500_ (n=vladimir@2001:41b8:200:0:250:8bff:fe5d:5e54) Quit (orwell.freenode.net irc.freenode.net)
[00:24:06] * shoragan (n=shoragan@debian/developer/shoragan) Quit (orwell.freenode.net irc.freenode.net)
[00:25:29] <torus> sdh_ no idea how low it gets, but you could just hook up 5V and measure the current in idle-mode.
[00:25:43] * _av500_ (n=vladimir@2001:41b8:200:0:250:8bff:fe5d:5e54) has joined #beagle
[00:26:21] * shoragan (n=shoragan@debian/developer/shoragan) has joined #beagle
[00:31:37] <sdh_> yep that's what we'll try-- we're considering different platforms at the moment which is why I ask
[00:31:49] <sdh_> I'll poke around for that article, though. thanks
[00:34:40] * Meiz_n810 (n=Meizirkk@padedu-62-165-142-142.phnet.fi) Quit (Read error: 110 (Connection timed out))
[00:35:55] <sdh_> looks like I was just lazy-- http://elinux.org/BeagleBoard#Power_management
[00:36:12] <sdh_> pm git tree + some of those hardware mods sounds like the trick
[00:37:25] <sdh_> 9mW is quite respectable if it's really still usable there
[00:42:02] <djlewis> sdh_: cool
[00:44:27] * NishanthMenon (n=nmenon@nat/ti/x-vthraloqsxrihvls) Quit ("Ex-Chat")
[00:51:07] * sdh_ (i=802025cc@gateway/web/freenode/x-tmjbtdqntmqsfchb) Quit ("Page closed")
[00:52:06] * ddompe (n=ddompe@200.122.155.113) Quit ("ddompe is leaving")
[00:53:03] * hyc (n=hyc@76.91.220.157) Quit (Remote closed the connection)
[00:53:47] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) Quit ("Leaving")
[01:15:46] <torus> is it just me or does the aengstr??m images don't have the usual /etc/ld.so.conf file? Where does it knows how to load libraries? (I just want to add /usr/local/lib btw..)
[01:17:39] * Meiz_n810 (n=Meizirkk@padedu-62-165-142-142.phnet.fi) has joined #Beagle
[01:18:37] * kg4giy (n=kg4giy@linuxjournal/staff/DavidLane) Quit ("Time to track the dreaded Jabberwocky!")
[01:19:26] <djlewis> torus: which Angstrom image?
[01:20:48] <djlewis> mine has a /etc/ld.so.conf.d
[01:21:33] <torus> djlewis, don't know.. I made mine using the online package builder
[01:22:00] <torus> anyway - I just added the fine and it seems to work.
[01:22:06] <torus> (only as root though)
[01:22:21] <djlewis> Hmm. I see that when I installed opencv it looks to have added the /etc/ld.so.conf.d directory
[01:23:29] <torus> strange - it's not a library loading problem.. as non-root I just don't have access to ALSA...
[01:23:39] <torus> <-- is doing some sound programming tests on the beagle.
[01:24:02] <djlewis> looks like ld.so.cache has the list
[01:30:28] * k2h (i=4b28bfb5@gateway/web/freenode/x-cduphjuckqkvmdiw) has joined #beagle
[01:32:11] <torus> ah - fixed as well.. chmod 666 on /dev/dsp allows alsa for users as well.
[01:35:39] * edufelipe (n=edufelip@189.4.104.196) has joined #beagle
[01:38:58] <djlewis> cool, dodging tornadoes here tonight.
[01:41:16] <djlewis> my BB has been up about three days now.
[01:42:17] <torus> my BB always powers on when I turn on the computer...
[01:42:23] <torus> it runs super stable...
[01:43:16] <Animule> My spaghetti is watery.
[01:46:27] <djlewis> my spaghetti O's with big meatballs was weird.
[01:48:59] <djlewis> I have had off/on EHCI USB hickups but it was a hub and a cable.
[01:51:09] * ldesnogu_ (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit ("Leaving")
[01:59:27] * edufelipe (n=edufelip@189.4.104.196) has left #beagle
[02:06:05] * cbrake_away (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Read error: 104 (Connection reset by peer))
[02:06:16] * cbrake_away (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
[02:11:31] * thomas_ (i=3ab9261e@gateway/web/freenode/x-pktvekugeilflczx) has joined #beagle
[02:13:44] * raster_ (n=raster@124-170-143-152.dyn.iinet.net.au) has joined #beagle
[02:16:36] <ds2> *splat*
[02:19:45] * robclark (n=robclark@ppp-70-129-131-109.dsl.rcsntx.swbell.net) Quit ()
[02:19:50] <djlewis> like a bug on the windshield....
[02:21:01] <ds2> indeed
[02:21:18] <ds2> the lcds are in!!!!
[02:21:33] * j_ack_ (n=j_ack@p57A427D0.dip0.t-ipconnect.de) has joined #beagle
[02:22:48] * j_ack_ (n=j_ack@p57A427D0.dip0.t-ipconnect.de) Quit (Client Quit)
[02:31:06] * raster (n=raster@enlightenment/developer/raster) Quit (Read error: 101 (Network is unreachable))
[02:37:10] * rsalveti (n=rsalveti@189.115.166.5.dynamic.adsl.gvt.net.br) has joined #beagle
[02:37:21] * j_ack (n=j_ack@p57A4259C.dip0.t-ipconnect.de) Quit (Read error: 110 (Connection timed out))
[02:37:42] <djlewis> wouldn't that be more of a 'pop, fizz,' of the champagne ?
[02:42:12] <ds2> tired from the free food :D
[02:42:54] * torus (n=nils@d066242.adsl.hansenet.de) Quit (Remote closed the connection)
[02:47:08] * cbrake_away (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Read error: 110 (Connection timed out))
[02:48:29] * khasim (n=a0393720@192.163.20.231) has joined #beagle
[02:49:00] <sakoman> Crofton: pong
[02:51:31] * thahemp (n=unf@ip68-102-130-189.ks.ok.cox.net) has joined #beagle
[02:58:47] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
[03:00:28] * cody_ (n=cody@dslb-084-056-091-053.pools.arcor-ip.net) has joined #beagle
[03:01:24] <Crofton> sakoman, ping
[03:01:37] <sakoman> Crofton: pong
[03:01:41] <Crofton> heh
[03:01:46] <Crofton> hmm
[03:01:50] <Crofton> what was I wondering
[03:02:36] <Crofton> has anyone attached an sd card to the gumstix, via a board
[03:03:08] <sakoman> I seem to recall that someone has done that, but I don't remember who!
[03:03:58] <sakoman> maybe try a mailing list search, that's likely where I read it
[03:04:00] <Crofton> the zippy does
[03:04:01] <Crofton> ok
[03:04:12] <Crofton> but I am curious about the overo case
[03:04:25] <sakoman> yeah, I did the patch for the zippy :-)
[03:05:07] <ds2> ZzzzzzzzzzippppppppppppppppppppppY
[03:05:10] <Crofton> is it the same port as the beagle?
[03:06:07] <sakoman> can't remember :-)
[03:06:15] <Crofton> chilly down here tonight
[03:06:30] * gdm (n=gdm@190.173.100.86) Quit (Read error: 110 (Connection timed out))
[03:06:55] <sakoman> it would have to be the 3rd port for overo since the second is used for wifi
[03:07:07] <Crofton> ok
[03:07:34] <sakoman> I think perhaps zippy is the second port, but you would have to check to be sure
[03:07:56] <Crofton> trying to search the list archives
[03:08:26] <ds2> Crofton: what are you going to use the second SD slot for?
[03:08:58] <lemay> evil!
[03:08:59] * gdm (n=gdm@190.173.80.35) has joined #beagle
[03:09:12] <ds2> lemay: eh?
[03:09:22] <Crofton> basically, if the overo is on a board in a case, this is a way for a user to insert a file system
[03:09:27] <lemay> that's what I would use it for ...
[03:09:30] <sakoman> Crofton: I checked - zippy is second mmc port
[03:09:49] <ds2> Crofton: but why not make a slot for the existing microSD slot and use that?
[03:09:56] <Crofton> tell harvind to use Angstrom :)
[03:10:08] <Crofton> mechanical robustness questions
[03:10:35] <ds2> so a single properly made slot is going to reduce the strength of your case but a bigger full size SD slot won't?
[03:11:04] <ds2> lemay: why not use the main slot?
[03:11:06] <Crofton> no, robustness of the sd card
[03:11:12] <ds2> Ohhh
[03:11:19] <ds2> so that argument would not apply to the beagle then?
[03:12:33] <Crofton> and overo is mmc3
[03:18:41] * Septalici (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) has joined #beagle
[03:18:48] <sakoman> Crofton: for SD on mmc3 you would need to use the "automatic" level conversion buffers since tranceiver control signals aren't available for that port
[03:18:59] <Crofton> yeah
[03:19:20] <Crofton> ok found the emails
[03:19:51] <ds2> sakoman: or use a 1.8V card
[03:20:02] * cody (n=cody@dslb-084-056-105-215.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
[03:20:26] <Crofton> pandora uses it also
[03:22:06] <djlewis> gn
[03:22:21] * djlewis (i=4b0f4155@gateway/web/freenode/x-irqjzuyxaqcsqxgg) Quit ()
[03:23:49] * jayabharath (n=a0866114@nat/ti/x-wdwgkkebfhlgyjqy) has joined #beagle
[03:24:07] * jayabharath (n=a0866114@nat/ti/x-wdwgkkebfhlgyjqy) Quit (Remote closed the connection)
[03:24:27] <sakoman> ds2: that would work too
[03:24:52] * Sept (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (Read error: 110 (Connection timed out))
[03:24:53] <Crofton> how easy is it to get 1.8v cards?
[03:25:05] <ds2> amazon has them
[03:27:42] <ojn> 1.8v storage cards? really?
[03:27:47] <ojn> got a pointer?
[03:28:39] <ojn> We ended up building a voltage converter adapter a while back because we couldn't find any storage cards that didn't need at least 2.5v
[03:30:38] * _koen_ (n=x0115699@nat/ti/x-xbmyrecmqnbnjxwa) has joined #beagle
[03:30:57] <ojn> Aaah, MMCmobile cards.
[03:31:26] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[03:31:28] <ojn> And nothing larger than 2GB available. That explains why I couldn't find them.
[03:33:00] <ds2> yeah, MMC mobile is one of them
[03:49:25] * k2h (i=4b28bfb5@gateway/web/freenode/x-cduphjuckqkvmdiw) Quit (Ping timeout: 180 seconds)
[03:51:01] <ds2> sigh... YET again, flash pegs the cpu
[03:51:16] * Crofton (n=balister@adsl-76-200-183-30.dsl.pltn13.sbcglobal.net) Quit ("Leaving")
[03:57:10] * radhermit (n=radhermi@c-67-169-210-177.hsd1.or.comcast.net) Quit (Client Quit)
[03:57:22] * radhermit (n=radhermi@c-67-169-210-177.hsd1.or.comcast.net) has joined #beagle
[03:58:56] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) Quit ()
[04:00:33] * Tejas (i=3b5fd1c5@gateway/web/freenode/x-oosnnccmgncnkzkp) has joined #beagle
[04:00:42] <Tejas> Hello
[04:01:09] <Tejas> if some one can help me on gstreamer on beagleboard
[04:02:03] * Meiz_n810 (n=Meizirkk@padedu-62-165-142-142.phnet.fi) Quit (Read error: 110 (Connection timed out))
[04:05:08] * raster_ is now known as raster
[04:08:31] * jeremychang_ (n=jeremych@61-30-10-70.static.tfn.net.tw) has joined #beagle
[04:13:21] <Tejas> ping
[04:19:10] * Crofton (n=balister@207.47.37.32.static.nextweb.net) has joined #beagle
[04:29:50] <Tejas> need help on gstreamer
[04:33:48] * _koen_ (n=x0115699@nat/ti/x-xbmyrecmqnbnjxwa) Quit (Remote closed the connection)
[04:34:41] * thahemp (n=unf@ip68-102-130-189.ks.ok.cox.net) Quit (Read error: 110 (Connection timed out))
[04:52:50] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
[04:57:19] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
[05:00:59] * mrc_001 (n=mrc_001@193.170.135.167) has joined #beagle
[05:04:13] * mrc_001_ (n=mrc_001@193.170.135.167) has joined #beagle
[05:08:34] * machine24 (n=chatzill@c-24-18-219-38.hsd1.wa.comcast.net) has joined #beagle
[05:10:35] <machine24> Anybody there?
[05:10:49] <av500> no
[05:11:07] <machine24> cool, I tried last night and couldn't see any conversation.
[05:11:09] <machine24> :)
[05:11:32] <machine24> Hoping someone can help. I'm looking for a 3d model of the beagleboard.
[05:11:55] <av500> make one :)
[05:12:22] <machine24> Well, yes, I might, but hoping not to repeat the task if it's already been done.
[05:12:33] <av500> I'm not aware of one
[05:12:48] <av500> did you check beagleboard.org
[05:12:56] <ds2> there is one for the RevB's
[05:13:13] <ds2> I have a crude one for RevC, but I am not posting that w/o a good reason ;)
[05:13:27] <av500> http://sketchup.google.com/3dwarehouse/details?mid=c799f7c9811d31dbec4c3c50ef723b95
[05:13:36] <machine24> I didn't see anything like that on their website.
[05:13:38] <ds2> av500: that's the one I believe
[05:13:46] <machine24> Ooh sketchup
[05:13:58] <ds2> sketchup lockup
[05:14:33] <av500> dont blame me, I just used google and clicked on the 3rd hit...
[05:14:52] <av500> ah more:
[05:14:54] <av500> http://sketchup.google.com/3dwarehouse/details?mid=9904cdeba8e76daca3374bbb8941adff
[05:14:57] <machine24> well, it's not real cad, but it's a start.
[05:15:45] <av500> and my favorite:
[05:15:47] <av500> http://sketchup.google.com/3dwarehouse/details?mid=aff16fd8701ffea849f39eb695a84c
[05:15:52] <ds2> av500: that one is the one I know about
[05:16:17] <ds2> machine24: what format do you want it in?
[05:16:33] <machine24> I'm using Alibre
[05:16:42] <machine24> Let me check what formats it supports.
[05:16:44] <ds2> ah... mine is setup as an alibre part
[05:17:08] <machine24> that would be perfect!
[05:17:15] <ds2> what are you going to use it for?
[05:17:58] <machine24> I'm building a bot and I'm going to machine an aluminum housing to mount the board in.
[05:18:27] <ds2> You got CAM?
[05:19:09] <machine24> yes, a friend does, and it can import alibre to generate toolpaths
[05:20:15] <machine24> Mastercam X4
[05:20:24] <ds2> X4 can import Alibre?!
[05:20:31] <machine24> Yup
[05:20:34] <ds2> WOW
[05:20:55] * siji (n=siji@122.170.9.183) has joined #beagle
[05:21:07] <machine24> ds2 - Any chance you'd be willing to share your part?
[05:21:22] <ds2> I am not sure if mine is featureful enough for your use. I created it for sanity checking my own cases
[05:21:24] * mrc_001 (n=mrc_001@193.170.135.167) Quit (Read error: 110 (Connection timed out))
[05:21:24] * mrc_001_ is now known as mrc_001
[05:21:52] <machine24> Well, it's a start, I'm new to Alibre, I picked it up with their $99 deal, so I'm a little slow.
[05:23:19] <ds2> maybe do a trade.. model for a case + the post for it? :D
[05:23:45] <ds2> took a while to do the measurements for it
[05:23:46] <machine24> hmm
[05:24:20] <ds2> what are you going to run the tool path on? got a VMC or something like it?
[05:24:57] <machine24> Yeah, he's got a big 4-axis.
[05:25:24] <Tejas> i have beagleboard of rev B7 and i want to work on gstreamer
[05:25:29] <Tejas> can anyone help me out
[05:25:38] <Tejas> how can i start
[05:25:40] <Tejas> ?
[05:25:49] <ds2> it is not hard to make the model... just time consuming, hence my reluctance to just throw it around
[05:28:13] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
[05:29:55] * niral (i=3b5fd1c5@gateway/web/freenode/x-bqxaibmevmzjhovx) has joined #beagle
[05:30:36] <niral> hi
[05:31:10] <niral> what will be the size of MLO and uboot written in NAND...which comes with beagle board?
[05:33:41] <siji> niral,I think MLO is bear 20KB
[05:33:49] <siji> *near
[05:35:30] <niral> beacuse i want to write some thing to nand but after MLO and uboot
[05:35:32] <siji> and uboot i think 2.5MB or smthing
[05:42:20] <av500> niral: and nand is what 128 or 256MB?
[05:42:30] <av500> so, Id say you have a lot of code to write to fill that
[05:47:19] * machine24 (n=chatzill@c-24-18-219-38.hsd1.wa.comcast.net) Quit ("ChatZilla 0.9.85 [Firefox 3.5.3/20090824101458]")
[05:53:10] <niral> ya
[05:56:41] * mrc_001 (n=mrc_001@193.170.135.167) Quit ()
[06:10:45] * Vijaya (n=chatzill@203.187.134.35) has joined #beagle
[06:12:17] * Vijaya (n=chatzill@203.187.134.35) has left #beagle
[06:14:28] * jserv-- (n=jserv@61-30-10-70.static.tfn.net.tw) has joined #beagle
[06:15:19] * tasslehoff (n=tassleho@147.84-49-231.nextgentel.com) has joined #beagle
[06:16:59] <thomas_> hi there..
[06:17:19] <thomas_> I am facing problem with OE, can anyone help?
[06:17:47] <thomas_> after executing $ bitbake console-image, here is the error:
[06:18:06] <thomas_> NOTE: Running task 859 of 2093 (ID: 501, /home/iwow/multiwcm/oe/openembedded/recipes/linux/linux-omap_2.6.29.bb, do_fetch)
[06:18:21] <thomas_> fatal: Not a git repository
[06:22:30] * mprem (n=chatzill@203.187.134.35) has joined #beagle
[06:31:18] * bbbb (i=dce319a2@gateway/web/freenode/x-vsxunyyxdwkivhag) has joined #beagle
[06:32:40] * bearsh|work (n=quassel@inst-232.178.zhaw.ch) has joined #beagle
[06:34:12] * jpirko (n=jirka@sun-0.pirko.cz) has joined #beagle
[06:35:32] <bbbb> while kernel is booting at the end it will ask for "beagleboard login:" Then we need to type "root". can ayone tell me how to remove this dependency and where should I modify in the kernel. I am having BB rev C3.0 and using angstrom 2.6.28 kernel.
[06:37:57] * Beagle3 (n=Beagle3@228.199.64-86.rev.gaoland.net) has joined #beagle
[06:48:18] * franktango (n=a0746747@nat/ti/x-oeitoraxbpxjuhaj) has joined #beagle
[06:49:03] <siji> bbbb,it's nothing related to kernel as per my knowledge
[06:49:49] <bbbb> siji:
[06:50:42] <siji> bbbb, u can disable it by editing /etc/sudoers
[06:51:20] <bbbb> siji: as it is coming at the end of the kernel booting, I think , it should be some where in kernel files to be modified
[06:51:31] <bbbb> ok
[06:51:31] <siji> but i dnt knw more abt angstrom
[06:57:06] * Beagle3 (n=Beagle3@228.199.64-86.rev.gaoland.net) Quit ()
[06:57:20] * courville (n=courvill@archos.rain.fr) has joined #beagle
[06:57:36] * mykro (n=notranc@zima.linwin.com) Quit (Remote closed the connection)
[07:03:52] <bbbb> siji: I could not find any such folder
[07:04:03] <niral> default MLO and uboot which is in NAND,are those written bolcks status is reserved?
[07:04:54] <siji> sudoers ,it's only a file
[07:05:15] <bbbb> can anyone , who are femilier with angstrom , help me ??
[07:08:18] <bbbb> siji:
[07:08:33] <bbbb> siji: no such file found
[07:10:06] <adj> login has nothing to do with kernel
[07:11:17] <adj> and there's no sudo installed in your board, hence no /etc/sudoers
[07:11:45] * muriani (i=james@internal.directron.us) Quit (Read error: 104 (Connection reset by peer))
[07:11:48] <siji> adj,ok
[07:11:49] <adj> and i still fail to see how sudoers would affect login
[07:14:11] <siji> http://rpragana.tripod.com/short-commands.html
[07:14:16] <siji> bbbb,this may help you
[07:14:52] <adj> no, they wont help in this matter
[07:15:32] * killring (n=killring@76.226.238.171) Quit ()
[07:16:02] * eFfeM (n=frans@j192117.upc-j.chello.nl) has joined #beagle
[07:17:30] * muriani (i=james@internal.directron.us) has joined #beagle
[07:18:37] <bbbb> adj: do you have any idea on this how to remove this dependency?
[07:19:13] <adj> i'd start by reading busybox documentation
[07:21:53] * franktango (n=a0746747@nat/ti/x-oeitoraxbpxjuhaj) has left #beagle
[07:22:40] <adj> take a look at /etc/inittab and you should see how the terminal gets the login screen in the first place
[07:25:34] * Beagleroid (n=Beaglero@zux221-125-015.adsl.green.ch) has joined #beagle
[07:27:59] <bbbb> adj: do I need to check this on my board or in PC directory? In my PC directory I could not find /etc
[07:28:39] * franktango (n=a0746747@nat/ti/x-qwtlamwpxhsubfyi) has joined #beagle
[07:28:49] * franktango (n=a0746747@nat/ti/x-qwtlamwpxhsubfyi) has left #beagle
[07:33:07] <adj> it really depends on where and to which system would you like to do your modifications....
[07:44:30] * furibondox (i=d4b16625@gateway/web/freenode/x-wjkwjxenmvpvtehp) has joined #beagle
[07:45:13] <bbbb> adj: As I have not found any /etc/inittab file on the angstrom distribution folder, I got this stupid doubt. Whatever modifications I do for distribution files it should reflect on board. Correct me if I am wrong ..
[07:45:39] <bbbb> adj:
[07:46:26] <bbbb> adj: Could you please give some guidence on this how to to do ?
[07:46:56] <adj> no /etc/inittab? it should be there, always
[07:48:07] * lemay (n=asd@ip68-107-86-146.sd.sd.cox.net) has left #beagle
[07:48:37] <furibondox> hi all... anyone have an idea how to configure the kernel to have the host USB working? I downloaed the latest kernel as described here: http://elinux.org/BeagleBoard#Linux_kernel but if I plug a USB pendrive it is not recognized in any way...
[07:50:42] <adj> that kernel might need some patches to get USB working. You'll propably get much more success with angstrom kernel
[07:52:15] <furibondox> adj I'm using the latest kernel from git... it need also some patches?
[07:52:27] * franktango (n=a0746747@nat/ti/x-ddphiypzfxpqvtcy) has joined #beagle
[07:52:41] <furibondox> do you know where I can find that patches?
[07:52:44] <adj> afaik, several
[07:53:47] <adj> bbbb: I just took angstrom demo image and /etc/inittab *is* there, right where it should be.
[07:55:48] <bbbb> adj: I am having 2.6.28-omap1 kernel. I am looking in that directory. Am I correct ?
[07:56:51] <adj> no, login still has nothing to do with the kernel
[07:58:15] <bbbb> adj: you mean I should check these files on board, through teraterm, once after booting uImage?
[07:58:28] <adj> yes
[08:00:42] <bbbb> adj: at the end of uImage booting we get login prompt. then I have to give "root" and then I have to check for /etc/inittab file. Am I right?
[08:03:51] <adj> furibondox: latest git kernel is still missing some funky stuff like DSS2. You will find all the necessary patches from OpenEmbedded
[08:04:49] * sprobe (n=Sproger@fh.fh-joanneum.at) has joined #beagle
[08:06:00] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[08:06:26] <bbbb> adj: I could found the /etc/inittab . how should I see inittab ? I have to run or I have to open ? then what should I do to remove the login prompt?
[08:08:57] <adj> i was just giving you some pointers where to start and what to look for. The rest is up to you
[08:11:11] * hrw|gone is now known as hrw
[08:11:14] <hrw> morning
[08:11:25] <tasslehoff> morning
[08:12:11] * ArteK (n=Artur@81.15.241.96) has joined #beagle
[08:13:32] <sprobe> hey guys, I just stumbled upon beagleboard. are there any examples about multimedia development? e.g. videoplayer, imageviewer, audio playback and stuff?
[08:14:54] * Entasis (n=Jarred@118.210.98.80) has joined #beagle
[08:22:33] * florian (n=fuchs@port-217-146-132-69.static.qsc.de) has joined #beagle
[08:22:52] * ogra (n=ogra@ubuntu/member/ogra) Quit ("Verlassend")
[08:25:15] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[08:25:28] * ogra (n=ogra@ubuntu/member/ogra) Quit (Remote closed the connection)
[08:25:40] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[08:25:52] * ogra (n=ogra@ubuntu/member/ogra) Quit (Remote closed the connection)
[08:26:30] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[08:29:24] <Beagleroid> sprobe: yes, there are mplayer and a mp3-player
[08:31:29] * Christos_N (n=Christos@ppp-94-66-54-32.home.otenet.gr) has joined #beagle
[08:35:00] * thomas_ (i=3ab9261e@gateway/web/freenode/x-pktvekugeilflczx) Quit (Ping timeout: 180 seconds)
[08:52:59] * siji (n=siji@122.170.9.183) Quit (Read error: 104 (Connection reset by peer))
[08:55:34] * nrossi (n=na@61.37.96.58.static.exetel.com.au) has joined #beagle
[09:12:14] * siji (n=siji@122.170.9.183) has joined #beagle
[09:13:00] * recalcati___ (i=5e51e963@gateway/web/freenode/x-vjbzrdkpvqedrsbz) has joined #beagle
[09:13:53] * sprobe (n=Sproger@fh.fh-joanneum.at) Quit ("Leaving.")
[09:18:53] * thaytan (n=jan@78.16.125.78) Quit (Read error: 113 (No route to host))
[09:23:31] * pfoetchen (n=pfoetche@wvpn061.vpn.uni-wuerzburg.de) has joined #beagle
[09:33:28] * cbrake_away (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
[09:38:14] * siji (n=siji@122.170.9.183) Quit (Read error: 104 (Connection reset by peer))
[09:38:35] * siji (n=siji@122.170.9.183) has joined #beagle
[09:39:23] * dual (n=dual@5.79-160-122.customer.lyse.net) has joined #beagle
[09:42:56] * Beagleroid (n=Beaglero@zux221-125-015.adsl.green.ch) has left #beagle
[09:46:58] * ArteK (n=Artur@81.15.241.96) has left #beagle
[09:51:47] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
[09:57:43] * ambulkar (i=783d8aa8@gateway/web/freenode/x-eckdtovmcznagwqe) has joined #beagle
[09:57:52] * mru is now known as _troll_
[09:59:19] * _troll_ is now known as mru
[09:59:26] <ambulkar> i m facing problem with OpenEmbedded Installation . while running $ bitbake nano its complaining abt PERSISTENT and CACHE directory error
[10:01:11] * thaytan (n=jan@nat/sun/x-qgnwynvoncmifsmy) has joined #beagle
[10:01:12] * siji (n=siji@122.170.9.183) Quit (Read error: 104 (Connection reset by peer))
[10:01:34] * siji (n=siji@122.170.9.183) has joined #beagle
[10:28:15] * furibondox (i=d4b16625@gateway/web/freenode/x-wjkwjxenmvpvtehp) Quit ("Page closed")
[10:37:14] * bisco (i=5a9300c2@gateway/web/freenode/x-ibtooieapedawqqx) has joined #beagle
[10:37:55] <raster> koen: boo
[10:39:03] <craw> hey there
[10:39:40] * sli_ (n=sli@195.6.193.205) Quit ("Ex-Chat")
[10:40:43] <av500> raster: koen is over the ocean
[10:41:05] <craw> i have a question on dss2. that is, i have a 2.6.28 kernel with dss2 patches and i appended "omap-dss.def_disp=lcd omapfb.video_mode=480x640MR-16@60 vram=8M omapfb.vram=4M,4M" to uboots bootargs
[10:41:12] <bbbb> what is the maximum current rating for DC power regulator that can be used for BB revC3.0 board ?
[10:41:58] <craw> but i do not receive any picture on the lcd anymore (which previously was /dev/fb0)
[10:42:04] <craw> can anyone help?
[10:42:11] <raster> av500: aaaah flying!
[10:42:21] <raster> i have a presie for him
[10:42:25] <av500> yeah, awesome
[10:42:29] <av500> send it to me
[10:42:41] <av500> I'll keep it safe
[10:43:11] <hrw> bbbb: I use 200W psu so I have 5V with ~20-40A on line which powers BB
[10:43:15] <raster> oh it's going into svn
[10:43:28] <av500> hrw: only 40A....
[10:43:40] <av500> bbbb: ~1A is fine
[10:43:44] <av500> even 500mA
[10:43:53] <av500> depends on whether you power devices via usb
[10:43:55] <Tejas> can anyone help me to install gstreamer for beagleboard
[10:43:59] <av500> which is not so recommended
[10:44:16] <Tejas> i have downloaded gstreamer-0.10.21
[10:44:28] <av500> Tejas: use oe, it has gst
[10:44:43] <hrw> av500: :D
[10:44:47] <Tejas> i am applyuing this command./configure --prefix=/opt/gstreamer_beagle/ CC=/root/CodeSourcery/Sourcery_G++/bin/arm-none-linux-gnueabi-gcc \ --host=arm-none-linux-gnueabi PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
[10:45:08] <Tejas> but i am not able to configure it successfully
[10:45:09] <av500> PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
[10:45:10] <hrw> Tejas: what you run on BB?
[10:45:24] <Tejas> ffmpeg
[10:45:25] <av500> Tejas: how can u give it a PKG_CONFIG_PATH from your host?
[10:45:34] <hrw> Tejas: angstrom? ubuntu? umbaumba?
[10:45:45] <Tejas> red hat linux
[10:45:49] <av500> umbaumba 2.0 here!
[10:45:55] <Tejas> i am getting following error
[10:46:00] <av500> Tejas: on the BB, awesome!
[10:46:05] <Tejas> configure: error: Could not link libxml2 test program. Check if you have the necessary dependencies.
[10:46:08] <hrw> av500: umbaumba 2.0 was never released. 17.3 was 3 years ago
[10:46:26] <av500> hrw: I hacked into the repo server...
[10:47:33] <Tejas> first i am trying to install basic gstreamer library
[10:47:35] <av500> Tejas: well, looks like gst needs libxmls
[10:47:36] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[10:47:40] <Tejas> and then i will apply plugins
[10:47:54] <Tejas> ok
[10:48:00] <hrw> Tejas: ok, so I will retry... what you run on BeagleBoard?
[10:48:18] <Tejas> any video codec
[10:48:27] <Tejas> or any audio codec
[10:48:53] <hrw> sorry.. I will rephrase question like I would ask average Joe
[10:49:00] <hrw> Tejas: ok, so I will retry... what distribution you run on BeagleBoard?
[10:49:04] * av500 is now known as average_Joe
[10:49:10] <average_Joe> ask me?
[10:49:34] <Tejas> like.......
[10:49:43] * average_Joe is now known as av500
[10:50:07] <Tejas> i am not getting you hrw
[10:50:12] <craw> Tejas: like angstrom, debian, ubuntu
[10:50:20] <Tejas> angstrom
[10:50:30] <hrw> so why not use opkg to isntall packages?
[10:50:39] <hrw> ~curse people for not thinging
[10:50:50] <Tejas> i have installed libxml2 latest packag
[10:51:22] * sol-invictus (n=chatzill@143.205.116.245) Quit ("ChatZilla 0.9.85 [Firefox 3.0.14/2009090216]")
[10:51:38] <Tejas> i installed by following way
[10:51:39] <Tejas> ./configure --prefix=/opt/libxml/ CC=/root/CodeSourcery/Sourcery_G++/bin/arm-none-linux-gnueabi-gcc --host=arm-none-linux-gnueabi
[10:52:13] <hrw> codesurgery toolchain is not compatible with angstrom
[10:52:25] <hrw> and second: angstrom *HAS* gstreamer in repositories
[10:52:30] <Tejas> and it has been installed successfully
[10:52:55] <hrw> av500: we need g3nt00 for BB
[10:52:58] <Tejas> i have added bin path to PATH avriable also\
[10:53:23] <hrw> or rather fork LFS so people will be happy
[10:53:29] <Tejas> i am sorry
[10:53:34] <ambulkar> i m facing problem with OpenEmbedded Installation . while running $ bitbake console-image its complaining abt PERSISTENT and CACHE directory error
[10:53:37] <Tejas> i am not working on angstorm
[10:53:48] <hrw> ambulkar: show local.conf
[10:54:04] <hrw> ambulkar: and did you followed angstrom guide?
[10:54:06] <Tejas> i am working on linux-omap-dss
[10:54:24] <ambulkar> DISTRO = "angstrom-2008.1" BBFILES ="/home/saurabh/oe/openembedded/recipes/*/*.bb" TMPDIR ="/home/saurabh/oe/tmp" MACHINE ="beagleboard" ENABLE_BINARY_LOCALE_GENERATION="0"
[10:55:43] <ambulkar> ya i ve followed word by word i think the problem in profile.sh but not know to resolve it.
[10:56:42] * pfoetchen (n=pfoetche@wvpn061.vpn.uni-wuerzburg.de) Quit ("leaving")
[10:57:31] <hrw> ambulkar: ENABLE_BINARY_LOCALE_GENERATION="0" can be dropped (unless you use fedora<11 or rhel/centos)
[10:57:50] <ambulkar> ok let me try...
[10:57:54] <hrw> ambulkar: check permissions for TMPDIR
[11:01:12] * ogra (n=ogra@ubuntu/member/ogra) Quit (Remote closed the connection)
[11:01:42] <ambulkar> drwxrwxrwx 2 saurabh saurabh 4096 2009-10-09 16:30 tmp
[11:02:02] <ambulkar> r+w+x for tmp
[11:02:17] <hrw> strange
[11:02:33] <ambulkar> i droped ENABLE_BINARY_LOCALE_GENERATION="0"
[11:03:03] <craw> if i omit the "vram=8M omapfb.vram=4M,4M" from bootargs i can use /dev/fb0 again, but without it /dev/fb1 is unusable (because its size remains 0)
[11:03:27] <ambulkar> after running $ source profile.sh showing....
[11:03:51] <ambulkar> OE:beagleboard \[\033[01;32m\]OE:$MY_OE_CONF\[\033[00m\] ${PS1}
[11:04:04] <ambulkar> wht to do next?
[11:04:11] * pfoetchen (n=pfoetche@wvpn061.vpn.uni-wuerzburg.de) has joined #beagle
[11:04:20] <av500> hrw: ppl run gentoo on BB
[11:05:08] <hrw> ambulkar: show me that profile.sh
[11:05:11] <hrw> av500: I know
[11:05:23] <hrw> av500: and mostly ask less questions
[11:07:03] <ambulkar> export OE_HOME=\$HOME/oe export MY_OE_CONF="beagleboard"
[11:07:12] <ambulkar> export BBPATH=\$OE_HOME/beagleboard/:\$OE_HOME/beagleboard/\$MY_OE_CONF:\$OE_HOME/openembedded export BBFILES="\$OE_HOME/openembedded/recipes/*/*.bb"
[11:07:21] <ambulkar> export BB_ENV_EXTRAWHITE="MACHINE DISTRO ANGSTROM_MODE ANGSTROMLIBC OE_HOME" export PATH=\$OE_HOME/openembedded/bitbake/bin:\$PATH export CVS_TARBALL_STASH="http://oesources.org/sources/current/"
[11:07:32] <ambulkar> if [ "\$PS1" ]; then if [ "\$BASH" ]; then export PS1="\[\033[01;32m\]OE:\$MY_OE_CONF\[\033[00m\] \${PS1}" fi fi
[11:07:48] <hrw> drop CVS_TARBALL_STASH
[11:08:36] <hrw> change BBPATH to "BBPATH=dir-where-I-will-keep-conf/local.conf:dir-where-I-have-Oe"
[11:08:41] * ant_work (n=andrea@host214-85-static.34-85-b.business.telecomitalia.it) has joined #beagle
[11:09:27] * niral (i=3b5fd1c5@gateway/web/freenode/x-bqxaibmevmzjhovx) Quit (Ping timeout: 180 seconds)
[11:11:19] * khasim (n=a0393720@192.163.20.231) has joined #beagle
[11:14:18] * Tejas (i=3b5fd1c5@gateway/web/freenode/x-oosnnccmgncnkzkp) Quit (Ping timeout: 180 seconds)
[11:18:14] <craw> right, seems my omapfb.video_mode was wrong after all, works flawlessly now :)
[11:22:44] * jserv-- (n=jserv@61-30-10-70.static.tfn.net.tw) Quit (Remote closed the connection)
[11:24:57] * ant_work (n=andrea@host214-85-static.34-85-b.business.telecomitalia.it) has left #beagle
[11:40:55] * ArteK (n=Artur@81.15.241.96) has joined #beagle
[11:51:49] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #beagle
[11:54:50] * rcranetx (n=rcranetx@nat/ti/x-dqvwozxyhkooayki) has joined #beagle
[11:58:02] * bisco (i=5a9300c2@gateway/web/freenode/x-ibtooieapedawqqx) Quit (Ping timeout: 180 seconds)
[12:04:11] * _koen_ (n=x0115699@nat/ti/x-lkxceeeljennwuhy) has joined #beagle
[12:10:06] * jeremychang_ (n=jeremych@61-30-10-70.static.tfn.net.tw) Quit ("??????")
[12:17:23] * siji (n=siji@122.170.9.183) Quit (Read error: 104 (Connection reset by peer))
[12:17:41] * siji (n=siji@122.170.9.183) has joined #beagle
[12:18:56] * n6pfk (n=mike@96.238.186.191) has joined #beagle
[12:19:51] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
[12:24:26] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[12:29:16] * _koen_ (n=x0115699@nat/ti/x-lkxceeeljennwuhy) Quit (Remote closed the connection)
[12:31:43] * n6pfk (n=mike@96.238.186.191) Quit (Remote closed the connection)
[12:42:56] * wreza (i=624db7f0@gateway/web/freenode/x-joxpoxnzsecshvwb) Quit ("Page closed")
[12:43:28] * pro-rsoft (n=prorsoft@panda3d/developer/pro-rsoft) has joined #beagle
[12:43:52] <pro-rsoft> So... is it possible to alter my boot settings (bought a hdmi cable) from within ubuntu?
[12:43:52] * siji (n=siji@122.170.9.183) Quit (Read error: 131 (Connection reset by peer))
[12:44:10] <pro-rsoft> Otherwise I'd need to create a serial cable, etc, etc
[12:44:19] <pro-rsoft> (I mean, from within the beagle board)
[12:44:33] * siji (n=siji@122.170.9.183) has joined #beagle
[12:47:14] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[12:48:46] <av500> the uboot settings?
[12:52:51] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[12:53:24] <pro-rsoft> av500, yes
[12:53:29] <pro-rsoft> I want to switch to hdmi mode
[12:53:36] <pro-rsoft> or dvi mode, whatever its called
[12:55:00] <adj> it is possible but i have no idea how easy
[12:55:59] <av500> some new uboots use some boot.scr file on the SDcard, if yours does that you could change it easily
[12:56:14] <pro-rsoft> k, will try that
[12:56:40] <pro-rsoft> hehe, how cute, lxde shows a nice 3d screensaver that runs at 3 fps or so.
[13:05:25] * cwillu_at_work (n=cwillu@cwillu.com) Quit (Remote closed the connection)
[13:06:05] * ambulkar (i=783d8aa8@gateway/web/freenode/x-eckdtovmcznagwqe) Quit ("Page closed")
[13:11:22] <bbbb> I have BB rev C3.0 and using angstrom 2.6.28 kernel. can anyone help on rmoving root login prompt that appear at the end of kernel boot.
[13:12:45] * robclark (n=robclark@nat/ti/x-kdxiwnhoaegbnxvz) has joined #beagle
[13:12:55] <siji> bbbb, Still not solved :(
[13:13:07] <bbbb> adj given some clues but I am not able to resolve it. can anyone help on it
[13:13:21] <siji> ok
[13:13:33] <bbbb> siji: can u help?
[13:13:43] <siji> I will give a try
[13:14:14] <siji> can u just copy that /etc/inittab some where
[13:15:09] <bbbb> one sec ..
[13:15:28] <pro-rsoft> Ghrm, the boot.scr thign didnt work.
[13:15:41] <pro-rsoft> Are there other ways?
[13:15:55] <pro-rsoft> to setenv?
[13:16:08] * franktango (n=a0746747@nat/ti/x-ddphiypzfxpqvtcy) has left #beagle
[13:18:27] * prpplague (n=Dave@adsl-99-38-13-121.dsl.rcsntx.sbcglobal.net) has joined #beagle
[13:18:49] * ogra (n=ogra@ubuntu/member/ogra) Quit (Remote closed the connection)
[13:18:52] <bbbb> siji: http://pastebin.com/m698f9dcd
[13:19:01] <siji> ok
[13:19:37] * brijesh (n=bksingh@nat/ti/x-afqtblgicyhmdlwh) has joined #beagle
[13:20:10] * pfoetchen (n=pfoetche@wvpn061.vpn.uni-wuerzburg.de) Quit ("leaving")
[13:21:02] <siji> bbbb,line no 5
[13:21:11] <siji> instead of 5 try one
[13:21:21] <siji> Runlevel 1 is single-user.
[13:21:24] <siji> it may wrk
[13:21:25] <siji> i think
[13:22:00] <siji> <pro-rsoft>, can u explain what u wan to do
[13:22:35] <pro-rsoft> siji, I want to switch my uboot settings from svideo output to hdmi output.
[13:22:45] <pro-rsoft> without having to figure out how I wired the serial connection again. :)
[13:23:18] <pro-rsoft> so I would like to know a way to change it without serial connection. Maybe from inside ubuntu on my beagle board?
[13:23:26] <siji> ok
[13:23:39] <bbbb> siji: I will try and let u know
[13:23:47] <siji> bbbb,ok
[13:24:42] <av500> pro-rsoft: I dont think there is a tool to set uboot params from linux
[13:24:54] <hrw> av500: there is
[13:24:59] <hrw> uboot-utils package
[13:25:00] <av500> ah
[13:25:09] <av500> pro-rsoft: uboot-utils package
[13:25:33] <pro-rsoft> cool!
[13:25:36] <hrw> but needs carefull use as it pokes with MTD and can be provided with wrong setup
[13:25:47] <siji> av500,hrw,u mean hve to create ubuntu rootfs with uboot-utils package
[13:25:52] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
[13:26:18] <hrw> what you people have in minds? never heard about packages?
[13:26:21] * rsalveti (n=rsalveti@189.115.166.5.dynamic.adsl.gvt.net.br) Quit (Remote closed the connection)
[13:27:33] * Sept (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) has joined #beagle
[13:27:40] <siji> hrw,for me?
[13:27:52] <hrw> yes, you this time
[13:27:57] <siji> :(
[13:29:06] <siji> i mean that the current (test version for BB) is not by default cming with uboot-utils i think
[13:29:18] <av500> siji: uboot-utils was for pro-rsoft
[13:29:42] * florian (n=fuchs@port-217-146-132-69.static.qsc.de) Quit (orwell.freenode.net irc.freenode.net)
[13:29:42] * Septalici (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (orwell.freenode.net irc.freenode.net)
[13:29:43] <siji> av500, yes i understood
[13:29:46] * mpr (n=mpr@209.20.91.138) Quit (Remote closed the connection)
[13:29:48] * mpr (n=mpr@aggr.com) has joined #beagle
[13:30:00] <siji> the current ubunut (test version for BB) is not by default cming with uboot-utils i think
[13:30:28] <bbbb> siji: its hanging while loading the uImage
[13:30:33] <pro-rsoft> siji, does that matter?
[13:30:36] * BThompson (n=a0193480@nat/ti/x-hrepvogoohhtoury) has joined #beagle
[13:30:46] <siji> pro-rsoft ,ok
[13:30:53] <siji> bbbb,:(
[13:30:59] <pro-rsoft> siji, actually, I made my rootfs long before there was an ubuntu for bb
[13:31:08] <siji> ok
[13:31:20] <siji> bbbb, u mean it's not booting at all
[13:31:37] <siji> even kernel too ?
[13:33:15] <waazim1> hi siji I need some help.. I just got my new BB..am a begginer in embedded systems... I read in google wiki for BB that I should do a hardware setup before I connect my BB to a display
[13:33:34] <pro-rsoft> hrw, where can I find that package? It's not in the jaunty repositories.
[13:33:54] * mprem (n=chatzill@203.187.134.35) Quit ("ChatZilla 0.9.85 [Firefox 3.0.14/2009090216]")
[13:33:58] * _koen_ (n=x0115699@nat/ti/x-fiogtwrlcpffguzc) has joined #beagle
[13:34:07] <bbbb> siji: no..its booting the kernel..hanging while loading the rootfilesystem..
[13:34:53] <hrw> pro-rsoft: I do not know, I do not run ubuntu
[13:35:36] <siji> http://www.debian.org/distrib/packages
[13:35:41] <siji> give a try there
[13:35:54] <hrw> or just build it
[13:36:08] <pro-rsoft> uboot-envtools!
[13:36:09] <pro-rsoft> I see
[13:36:24] * jayabharath (n=a0866114@nat/ti/x-oozhlvcjhwwpzuur) has joined #beagle
[13:36:30] <pro-rsoft> thanks siji
[13:37:43] <siji> welcome :)
[13:38:38] * jkridner|work (n=a0321898@nat/ti/x-shspcdxjempisirf) has joined #beagle
[13:43:44] * khasim (n=a0393720@192.163.20.231) has joined #beagle
[13:43:48] <hrw> http://marcin.juszkiewicz.com.pl/2009/10/09/using-packages-does-not-hurt/
[13:44:58] <pro-rsoft> Yay, I got fw_printenv and fw_setenv working
[13:45:06] <hrw> cool
[13:45:27] <pro-rsoft> whats the max resolution of the beagle?
[13:45:39] <av500> pro-rsoft: now you have 1(one) chance to write another good and booting settings :-)
[13:45:47] <pro-rsoft> 1920x1080 good?
[13:45:49] <pro-rsoft> av500, hehe
[13:45:54] * gbykn (i=18b30482@gateway/web/freenode/x-qwhgggtjzyqebglr) has joined #beagle
[13:46:00] * nrossi (n=na@61.37.96.58.static.exetel.com.au) Quit ()
[13:46:09] <av500> pro-rsoft: I recommend reading up a lot about the BB....
[13:46:19] <pro-rsoft> its a long time since I did that
[13:46:26] <pro-rsoft> forgot half of it
[13:46:38] * florian (n=fuchs@port-217-146-132-69.static.qsc.de) has joined #beagle
[13:46:45] <av500> it's like flying a 747...
[13:46:51] <av500> you forget fast...
[13:47:23] <pro-rsoft> hey. cool @ zippy
[13:47:25] <gbykn> Hey florian: Thanks for all of you arm efforts.
[13:47:39] <pro-rsoft> not cool @ price
[13:48:37] <pro-rsoft> wow, ubuntu is even a lot more supported now. back when I last used my beagle board, everyone was like "don't even try to install ubuntu"
[13:49:55] * khasi1 (n=a0393720@192.163.20.231) has joined #beagle
[13:50:00] <florian> gbykn: yw... but I'm not sure what exactly you are referring to. :)
[13:50:24] * bbbb (i=dce319a2@gateway/web/freenode/x-vsxunyyxdwkivhag) Quit ("Page closed")
[13:50:53] <pro-rsoft> Grhm, great, now I've messed up my uboot
[13:51:16] <av500> pro-rsoft: sure
[13:51:24] <av500> now get that serial cable
[13:51:25] <pro-rsoft> Warning: Bad CRC, using default environment
[13:51:25] <pro-rsoft> ## Error: "bootargs" not defined
[13:51:33] <av500> what other way was to convince you :-)
[13:51:44] * gbykn (i=18b30482@gateway/web/freenode/x-qwhgggtjzyqebglr) Quit ("Page closed")
[13:51:50] <jkridner|work> hi waazim1
[13:52:20] <jkridner|work> what help do you need?
[13:52:21] <pro-rsoft> av500, ghrm. /me grabs his multimeter
[13:52:42] * av500 pets his multimeter
[13:53:36] <pro-rsoft> not unexpectedly, it no longer boots
[13:53:41] * recalcati___ (i=5e51e963@gateway/web/freenode/x-vjbzrdkpvqedrsbz) Quit (Ping timeout: 180 seconds)
[13:53:42] * nezticle (n=nezticle@62.70.27.104) has joined #beagle
[13:55:01] <nezticle> Is there a way to set a fixed MAC address from uboot bootargs?
[13:56:13] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[13:56:40] * siji (n=siji@122.170.9.183) Quit ("Leaving")
[14:02:56] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[14:03:11] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
[14:03:15] <Crofton> _koen_, ping
[14:04:36] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
[14:05:47] <pro-rsoft> whoot, I think I figured out the right wiring.
[14:06:54] <waazim1> to jkrinder|work Question is Can I connect a new BB directly to a TV using SVideo and a DC Power supply ?
[14:07:11] <waazim1> its a newly bought BB
[14:07:45] * magnet_ (n=magnet@AMontpellier-151-1-19-118.w92-143.abo.wanadoo.fr) has joined #beagle
[14:07:58] * furibondox (n=linux_us@net-93-65-146-184.cust.dsl.vodafone.it) has joined #beagle
[14:08:02] <furibondox> hi all
[14:08:10] <pro-rsoft> The wrong wiring. blech.
[14:08:15] <_koen_> Crofton: pong
[14:09:33] <pro-rsoft> Oops, mirrored it. :)
[14:10:29] <Crofton> _koen_, would kexec let me boot from an SD card on mmc3?
[14:11:55] <furibondox> i'm here with the same problem: i power my beagle C2 with the OTG USB, I've just compiled kernel 2.6.32-rc3 but the host usb don't work if I plug a usb pendrive (if I flash a prebuilt uImage, for example from amstrong or from debian it works...)
[14:11:58] <furibondox> any idea?
[14:13:08] * mg_ (i=c0232c18@gateway/web/freenode/x-ycqhoibstudmctiz) has joined #beagle
[14:14:14] <_koen_> Crofton: it would support booting from everyblock device linux supports
[14:14:21] <Crofton> ok
[14:14:25] <Crofton> that is what I thought
[14:14:26] <_koen_> Crofton: your best bet would be to pester ant___
[14:14:40] <Crofton> yeah, just looking for options atm
[14:14:57] <_koen_> you could teach uboot about mmc3
[14:15:05] <Crofton> yeah
[14:15:25] <Crofton> so u-boot runs in nand, but can load from mmc3
[14:15:32] <Crofton> I think that would be better :)
[14:16:11] <furibondox> anyone use linux-omap-2.6.git ?
[14:16:33] * j_ack (n=j_ack@p57A413A3.dip0.t-ipconnect.de) has joined #beagle
[14:16:48] <Crofton> furibondox, I have seen posts from people that do, but not sure if they ovled usb issues
[14:17:03] * rhk (n=rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) has joined #beagle
[14:17:04] <Crofton> _koen_, have fun being a texan tomorrow
[14:17:31] <furibondox> but i notice the same problem with 2.6.29 :(
[14:17:42] <furibondox> may be the problem is my _defconfig
[14:18:08] <furibondox> Crofton: are you able to mount usb pendrive plugged in USB host?
[14:18:29] <Crofton> I haven't tried
[14:19:52] <furibondox> I thought that the only way to test the HOST USB is plugging a pendrive... is there another way to test that usb port?
[14:20:12] <av500> plug any other usb device?
[14:20:13] <hrw> I would have to find pendrive first...
[14:20:28] <hrw> easier for me it to plug hub, mouse, keyboard, card reader..
[14:20:32] <hrw> .
[14:20:43] <av500> heater, fan, LED light
[14:20:46] <av500> coffee warmer
[14:20:52] <av500> rocket launcher
[14:22:20] <furibondox> every thing I plug in the HOST USB, I don't see anything with dmesg (or directly in the console)
[14:22:33] <pro-rsoft> furibondox, it's actually a USB 2.0 device, right?
[14:22:48] <pro-rsoft> it doesn't support usb 1.1, afaik. If it's a usb 1.1 device, you'll need to use a 2.0 hub
[14:23:01] <furibondox> root@beagleboard:~# lsusb
[14:23:01] <furibondox> Bus 001 Device 001: ID 1d6b:0002
[14:23:01] <furibondox> Bus 002 Device 001: ID 1d6b:0002
[14:27:25] <furibondox> pro-rsoft: i plugged a lot of different devices but seems that no power arrives to that usb port
[14:27:42] <furibondox> but with a precompiled kernel it works...
[14:28:16] <furibondox> i'm quite confused
[14:28:18] <furibondox> :(
[14:38:17] * spvensko (n=spvensko@rrcs-24-199-144-166.midsouth.biz.rr.com) has joined #beagle
[14:38:23] * j_ack (n=j_ack@p57A413A3.dip0.t-ipconnect.de) Quit ("Verlassend")
[14:40:12] <pro-rsoft> Hrm, I remember I had a problem with usb not working on a different kernel too... long time ago
[14:40:16] <pro-rsoft> dont remember what I did to fix it tho
[14:41:56] <Crofton> Angstrom carries quite a few extra patches that are slowly going upstream
[14:48:09] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) has joined #beagle
[14:53:41] <furibondox> pro-rsoft: which kernel version do you have? have you built it yourself or have you take it already built?
[14:53:56] <pro-rsoft> I built it myself, a long time ago
[14:54:03] * mrc_001 (n=mrc_001@212-183-118-91.adsl.highway.telekom.at) has joined #beagle
[14:54:07] <pro-rsoft> when there were none for ubuntu yet
[14:54:16] <furibondox> 2.6.* ?
[14:55:35] <pro-rsoft> 2.6.29
[14:56:24] <furibondox> mmm
[14:56:53] <furibondox> where do you have take the source?
[14:57:10] <furibondox> i've also 2.6.29 sources from TI PSP SDK
[14:57:29] <pro-rsoft> From git.
[14:57:54] <pro-rsoft> I advise against doing what I did tho.
[14:57:56] <waazim1> can somebody help me booting BB from a MMC using a windows host
[14:58:06] <pro-rsoft> furibondox, what OS are you using? ubuntu? angstrom?
[14:58:17] <pro-rsoft> waazim1, just state your problem
[14:58:22] <furibondox> amstrong but the problem is not related to the OS
[14:59:07] <waazim1> pro-soft : I am new to BB.. I have a windows PC... How do i prepare my MMC ?
[14:59:08] <furibondox> because with the same OS some kernel (precompiled) have a usb host working while others (not precompiled) have usb host not working :(
[14:59:59] <pro-rsoft> waazim1, did you see this page?
[15:00:00] <pro-rsoft> http://elinux.org/BeagleBoardBeginners
[15:00:00] * tor2_ (n=nirc@firewall.spacetec.no) has joined #beagle
[15:00:39] * Openfree (n=Openfree@222.65.99.6) Quit (Read error: 110 (Connection timed out))
[15:01:36] <waazim1> prosoft : is there a more detailed description for windows ?
[15:01:49] <pro-rsoft> Oh, windows. /me hides
[15:01:51] <pro-rsoft> no clue
[15:05:17] * cody_ (n=cody@dslb-084-056-091-053.pools.arcor-ip.net) Quit ("leaving")
[15:05:25] * jpirko (n=jirka@sun-0.pirko.cz) Quit ("Leaving")
[15:05:47] * cody___ (n=cody@dslb-084-056-091-053.pools.arcor-ip.net) has joined #beagle
[15:09:14] * Meizirkki_ (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #beagle
[15:13:58] * raster (n=raster@enlightenment/developer/raster) Quit (Remote closed the connection)
[15:14:42] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (Read error: 60 (Operation timed out))
[15:15:22] * recalcati (i=5e51e963@gateway/web/freenode/x-mxhlxxpdscsjjbgd) has joined #beagle
[15:15:42] * tasslehoff (n=tassleho@147.84-49-231.nextgentel.com) Quit ("Leaving")
[15:15:50] <recalcati> jkridner|work: will you come to ELC?
[15:17:24] * recalcati (i=5e51e963@gateway/web/freenode/x-mxhlxxpdscsjjbgd) Quit (Client Quit)
[15:18:39] * jayabharath (n=a0866114@nat/ti/x-oozhlvcjhwwpzuur) Quit ("Leaving.")
[15:18:48] * florian (n=fuchs@port-217-146-132-69.static.qsc.de) Quit (Remote closed the connection)
[15:21:27] <furibondox> pro-rsoft, with this kernel the USB HOST works: http://www.rcn-ee.net/deb/kernel/beagle/jaunty/v2.6.29-58cf2f1-oer45.1/uImage
[15:23:01] <furibondox> how can I do to re-compile that kernel?
[15:25:43] * gatorEng (i=46b971bd@gateway/web/freenode/x-atqlmarcxrafsroc) has joined #beagle
[15:29:58] * fischer (n=fischer1@71.216.156.246) Quit (Read error: 145 (Connection timed out))
[15:30:59] * spvensko_ (n=spvensko@adsl-072-151-081-078.sip.rmo.bellsouth.net) has joined #beagle
[15:36:10] * spvensko (n=spvensko@rrcs-24-199-144-166.midsouth.biz.rr.com) Quit (Read error: 60 (Operation timed out))
[15:36:10] * spvensko_ is now known as spvensko
[15:39:18] <furibondox> someone use a kernel compiled by his hands?
[15:41:37] * prpplague has mental image of someone using an abacus to compile a kernel
[15:41:43] * fischer (n=fischer1@fischerfamily.org) has joined #beagle
[15:42:32] <Crofton> mru compiles kernels using bined
[15:42:42] <av500> prpplague: why abacus?
[15:43:14] <av500> pen and paper should be enough...
[15:43:15] <prpplague> av500: just with the phrase that furibondox used "by his hands"
[15:43:39] <furibondox> someone use linux-omap-2.6 from git?
[15:43:41] <prpplague> av500: indeed, abacus just seems more mechanical
[15:43:52] * av500 wants a hex abacus
[15:44:02] <Crofton> furibondox, check out the rev used by angsrom and apply the patches listed in the bb file
[15:44:04] <Crofton> then compile
[15:44:17] <gatorEng> Hey guys, I need to be able to plug a radio that is recieving video data into the beagle board, and have the board run a buffering application that outputs video to the pico projector..I dont wan to have to run an OS though..is this possible
[15:44:31] <furibondox> Crofton: i'm compiling the amstrong yes... a very long compilation
[15:44:38] <Crofton> gatorEng, easier to use an os ....
[15:45:04] <muriani> gatorEng: you're writing a baremetal application at that point. Much easier to develop on top of linux.
[15:45:11] <av500> gatorEng: good luck
[15:45:31] <gatorEng> O.o...the reason is that there will be no input other the video signal
[15:45:32] <Crofton> ok, off to Galactic HQ
[15:45:38] <prpplague> av500: that would be interesting
[15:45:45] <gatorEng> so I wouldnt be able to open an app..log into linux..nothing
[15:45:54] <gatorEng> unless it was automatic..is that possible?
[15:45:59] <av500> ???
[15:46:10] <Crofton> gatorEng, I think you need to be clearer
[15:46:20] * Crofton (n=balister@207.47.37.32.static.nextweb.net) Quit ("Leaving")
[15:46:53] <gatorEng> Hrm..ok...So i need to plug a vga video source to an encoding board...to a radio..that transmits to another radio...which then is decoded and to the pico projector
[15:47:28] <gatorEng> but..there will be no keyboard on either side..this should be just..if there is a source..then it comes out the pico..if not..then nothing
[15:47:40] <av500> gatorEng: fine
[15:47:44] <av500> still use linux
[15:47:50] <av500> linux boots fine without a keyboard
[15:48:04] <av500> or buy a cheap 2.4ghz video transmitter :-)
[15:48:47] <gatorEng> Well..which linux distro would you suggest? looking for very quick boot if possible..
[15:49:05] <jkridner|work> recalcati: I wasn't planning to make it to ELC.
[15:49:13] <muriani> it sounds like you're making this a lot more difficult than it has to be
[15:49:16] <av500> ELC where?
[15:49:30] <muriani> if you're just transmitting video, there are products to do exactly that.
[15:49:45] <gatorEng> ah..but I'm doing it in an MRI room setting
[15:49:51] <muriani> well, not necessarily VHA though
[15:49:52] <gatorEng> so i need to use mri tested radios
[15:49:55] <muriani> *vga
[15:50:02] <furibondox> sorry but I don't understand... how can I do to apply the patches described here: http://www.rcn-ee.net/deb/kernel/beagle/jaunty/v2.6.29-58cf2f1-oer45.1/changes.txt ?
[15:50:24] <gatorEng> i have some constraints..the radios are just data radios
[15:50:45] <av500> just data
[15:51:02] <av500> what else?
[15:51:35] <gatorEng> I'm not sure I know what you mean...I'm very new to hardware..and this low level stuff
[15:52:06] <av500> gatorEng: we're not so sure what you mean actually :-)
[15:52:35] <muriani> it seems he wants to take VGA video data, encode to a digital format, trasmit data. and then decode on the other end
[15:52:58] <av500> muriani: yes
[15:52:59] <gatorEng> yes..thats right Muriani
[15:55:01] * cbrake_away is now known as cbrake
[15:55:07] <waazim1> is there any available video decoders than can be used with BB?
[15:55:26] <muriani> there's mplayer and gstreamer :)
[15:56:06] <muriani> gatorEng: I think your problem is going to be the digital encoding, most likely.
[15:56:20] <gatorEng> hrm..what makes you say that
[15:56:35] <gatorEng> I could use a computer or another board or the encoding
[15:56:39] <muriani> most of the acceptably-streamable video encoding/compression formats are lossy, which you don't want for medical imaging
[15:56:42] <waazim1> yea
[15:56:56] <gatorEng> The data wont be transmitting mri data
[15:57:05] <gatorEng> it will be video for entertainment
[15:57:06] <muriani> what is it transmitting?
[15:57:18] <gatorEng> its just in the MRI room setting
[15:57:27] * mrec_ is now known as mrec
[15:59:14] <gatorEng> I assume the encoding of video will be pretty straight forward
[15:59:31] <gatorEng> just use a commonly used compression format then send to radio
[15:59:41] <gatorEng> im worried about the decoding side
[15:59:52] <muriani> I'd suggest an mpeg2/4 encoder board on the sending end then
[16:00:03] <muriani> decoding can be done in software on the beagle
[16:00:18] <waazim1> which software?
[16:00:28] <gatorEng> ok, so that would take vga encode and send to radio with no code needed?
[16:00:30] <waazim1> I am also doing a video geamin app
[16:00:49] <waazim1> sending encoded video and decoding at the bb
[16:00:51] <muriani> gatorEng: no idea. It's your project, not mine :)
[16:01:18] <gatorEng> haha
[16:01:23] <muriani> but I'm sure there's hardware to do that
[16:01:28] <muriani> likely expensive though
[16:01:30] <gatorEng> Ok,good to know
[16:01:36] <gatorEng> Ill look for that
[16:02:23] <gatorEng> Sorry for my ignorance on this subject..I really appreciate your patience..I will be checking back in periodically over the next couple of months possibly :)
[16:02:29] * gatorEng (i=46b971bd@gateway/web/freenode/x-atqlmarcxrafsroc) Quit ("Page closed")
[16:02:31] <muriani> onthe beagle side, you'd have to interface a receiver, and then have that receiver pass the encoded video data to the beagle
[16:02:34] <muriani> ...
[16:02:57] <muriani> you can likely pipe the data to mplayer or gstreamer and it'll decode and output.
[16:04:09] * n6pfkk (n=mike@96.238.186.191) Quit (Read error: 113 (No route to host))
[16:04:51] <pro-rsoft> furibondox, why recompile?
[16:05:08] <waazim1> how do u use interface a reciever?
[16:06:09] <muriani> how do I do it?
[16:06:14] <muriani> I don't :P
[16:06:28] <muriani> I imagine you might have to interface via USB or SPI
[16:06:46] <av500> waazim1: what receiver?
[16:06:49] <furibondox> i need to recompile in order to add an additional serial to the expansion slot
[16:07:43] <waazim1> i have a video gaming appln. in which i send a encoded video from server and i recieve it in BB which will decode it and display it
[16:08:03] <av500> you're from onlive?
[16:08:35] <waazim1> yea
[16:10:21] <pro-rsoft> The hdmi output should work with any hdmi-compatible monitor, right?
[16:10:41] <waazim1> yea it shud
[16:10:41] <av500> more or less
[16:10:56] * thaytan (n=jan@nat/sun/x-qgnwynvoncmifsmy) Quit ("Ex-Chat")
[16:11:10] <pro-rsoft> hrm, for some reason I cant get it working with my 250 bucks monitor.
[16:11:26] <waazim1> but there shud be a decoder which wud decode the video
[16:11:55] <pro-rsoft> s/u/oul/
[16:12:16] <prpplague> anyone here done business with kwikbyte.com?
[16:12:33] <muriani> waazim1: oh, so you're transferring video over a network then?
[16:12:39] <waazim1> yea
[16:12:47] <muriani> ah, no receiver needed for that then
[16:12:55] <waazim1> how will i do
[16:13:31] <muriani> you'd have to write a client program for the beagle to receive the network video stream from the onlive server, and to send controller data back
[16:14:11] <muriani> now I don't know how well it'd all work, since onlive depends on decoding video really really fast
[16:14:31] <av500> prpplague: the KBOC is ugly
[16:14:31] * flo_lap (n=fuchs@g228201172.adsl.alicedsl.de) has joined #beagle
[16:14:33] <muriani> brb, reinstalling linux
[16:15:17] <prpplague> av500: i've heard that comment from a number of people, but i am curious in what ways you find it ugly?
[16:15:33] <av500> its 5x an overo, for what?
[16:15:54] * flo_lap is now known as florian
[16:15:54] * j_ack (n=j_ack@p57A410DA.dip0.t-ipconnect.de) has joined #beagle
[16:15:59] <av500> its a 2 layer pcb, maybe? :-)
[16:16:03] <prpplague> av500: i am sorry i did not understand your statement, do you mean 5 times the cost?
[16:16:09] <av500> the size
[16:16:22] <av500> I mean, our whole product pcb is smaller
[16:16:31] <prpplague> av500: ahh
[16:16:49] <prpplague> av500: so the physical size/layout is ugly
[16:17:15] <av500> btw, is there a law to put the jtag at an angle?
[16:17:47] * rcranetx (n=rcranetx@nat/ti/x-dqvwozxyhkooayki) Quit ("Leaving.")
[16:18:12] * ogra (n=ogra@ubuntu/member/ogra) Quit (Remote closed the connection)
[16:18:26] <prpplague> av500: hehe, i wondered about that as well, first time i've ever seen that is with the omap3 stuff
[16:19:02] <av500> the KBOS is 139, so 10 less than BB
[16:19:42] <prpplague> av500: yea, i can get the KBOC down to $109 in qty
[16:20:54] * killring (n=killring@adsl-76-234-149-75.dsl.sfldmi.sbcglobal.net) has joined #beagle
[16:22:15] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
[16:28:27] * hrw is now known as hrw|gone
[16:29:09] * _roger_ (n=a0740758@nat/ti/x-jyszozdgqjlemwwt) has joined #beagle
[16:30:34] <eFfeM> where do you guys get those prices from? kwikbyte website says 249
[16:31:14] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) Quit ()
[16:32:03] * mg_ (i=c0232c18@gateway/web/freenode/x-ycqhoibstudmctiz) Quit ("Page closed")
[16:32:21] * keithh87 (i=52991d4f@gateway/web/freenode/x-mntrxsyrdehojcwc) has joined #beagle
[16:32:32] <eFfeM> ah found, it the 139 seems to be the base board without connectors etc
[16:33:07] * keithh87 (i=52991d4f@gateway/web/freenode/x-mntrxsyrdehojcwc) has left #beagle
[16:33:38] * NishanthMenon (n=nmenon@nat/ti/x-wlazdsxkmrcuvplm) has joined #beagle
[16:33:46] <eFfeM> adn the bb2 is 149 and the bb1 is 249/299
[16:36:22] <prpplague> eFfeM: you are looking at the price the KBOC plus base board, i only need the KBOC
[16:36:57] * Crofton (n=balister@adsl-76-200-183-30.dsl.pltn13.sbcglobal.net) has joined #beagle
[16:37:00] * jayabharath (n=a0866114@nat/ti/x-pwfvqjrwmbjyjvlq) has joined #beagle
[16:37:37] <eFfeM> yeah noticed the diff
[16:37:53] <prpplague> eFfeM: beagleboard tends to be for software folks who aren't doing much hardware hacking, overo and the KBOC are more for people are doing proof of concept or low volume OEM manufacturing
[16:39:43] * pro-rsoft objects to that
[16:40:42] <prpplague> pro-rsoft: in what way?
[16:40:55] <furibondox> is there someone that use linux-omap-2.6 from git?
[16:42:09] * j_ack_ (n=j_ack@p57A40ED3.dip0.t-ipconnect.de) has joined #beagle
[16:43:20] * courville (n=courvill@archos.rain.fr) Quit ("leaving")
[16:48:50] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[16:51:49] * _roger_ (n=a0740758@nat/ti/x-jyszozdgqjlemwwt) Quit ("Leaving.")
[16:52:10] * j_ack_ (n=j_ack@p57A40ED3.dip0.t-ipconnect.de) Quit ("Verlassend")
[16:57:01] * j_ack_ (n=j_ack@p57A40ED3.dip0.t-ipconnect.de) has joined #beagle
[16:57:48] <ds2> what about l-o from git?
[16:58:11] * j_ack (n=j_ack@p57A410DA.dip0.t-ipconnect.de) Quit (Read error: 110 (Connection timed out))
[16:58:32] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[16:59:59] * Quist (i=55512753@gateway/web/freenode/x-gayhkctefnilyjao) has joined #beagle
[17:01:14] * jayabharath (n=a0866114@nat/ti/x-pwfvqjrwmbjyjvlq) Quit ("Leaving.")
[17:03:17] * n6pfk (n=mike@96.238.186.191) has joined #beagle
[17:04:43] * ogra (n=ogra@ubuntu/member/ogra) Quit (Remote closed the connection)
[17:04:55] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[17:04:57] * djlewis_ (i=41401e0d@gateway/web/freenode/x-bfyjxeqdjmaqgfmh) has joined #beagle
[17:05:14] * eFfeM (n=frans@j192117.upc-j.chello.nl) Quit ("Leaving.")
[17:13:07] * bearsh|work (n=quassel@inst-232.178.zhaw.ch) Quit (Read error: 104 (Connection reset by peer))
[17:16:20] * myhrman_ (n=quassel@h-79-136-58-95.NA.cust.bahnhof.se) has joined #beagle
[17:16:23] * myhrman (n=quassel@h-79-136-58-95.NA.cust.bahnhof.se) Quit (Read error: 104 (Connection reset by peer))
[17:28:34] * jayabharath (n=a0866114@nat/ti/x-ljznnncvbphcqjjv) has joined #beagle
[17:30:32] * _koen_ (n=x0115699@nat/ti/x-fiogtwrlcpffguzc) Quit ("Leaving.")
[17:31:44] * j_ack_ (n=j_ack@p57A40ED3.dip0.t-ipconnect.de) Quit (Read error: 110 (Connection timed out))
[17:36:26] * jayabharath (n=a0866114@nat/ti/x-ljznnncvbphcqjjv) Quit ("Leaving.")
[17:37:44] * jkridner|work (n=a0321898@nat/ti/x-shspcdxjempisirf) Quit ("Leaving.")
[17:39:55] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit (Connection timed out)
[17:41:07] * airman00_ (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[17:43:49] * Entasis (n=Jarred@118.210.98.80) Quit ("Leaving")
[17:55:44] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) Quit (Read error: 110 (Connection timed out))
[17:55:44] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) has joined #beagle
[18:00:10] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
[18:04:40] <airman00_> I get this error when I try to ./configure Nano text editor on my Angstrom beagleboard. configure:error: newly created file is older than distributed files! Check your system clock
[18:04:59] <prpplague> koen: when you headed home?
[18:06:06] * pro-rsoft (n=prorsoft@panda3d/developer/pro-rsoft) Quit ("kthxbye")
[18:06:10] * jrmuizel_ (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
[18:06:54] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit (Read error: 104 (Connection reset by peer))
[18:06:54] * jrmuizel_ is now known as jrmuizel
[18:10:51] * Meizirkki_ is now known as Meizirkki
[18:11:13] * khilman (n=khilman@216.254.16.51) Quit ("Leaving.")
[18:13:52] * j_ack (n=j_ack@p57A40B03.dip0.t-ipconnect.de) has joined #beagle
[18:17:47] <prpplague> for the canadians in the channel... zippy is now available at a canadian retailer - http://www.robotcraft.ca/webshop/p363/BeagleBuddy-Zippy-Ethernet-Combo-Board/product_info.html
[18:22:46] * ArteK (n=Artur@81.15.241.96) has left #beagle
[18:24:30] <ds2> msg , pong
[18:24:32] <ds2> bah
[18:30:17] * khasi1 (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[18:30:21] * n6pfkk (n=mike@96.238.186.191) has joined #beagle
[18:37:58] * ArteK (n=Artur@81.15.241.96) has joined #beagle
[18:38:38] * n6pfkk (n=mike@96.238.186.191) Quit (Read error: 104 (Connection reset by peer))
[18:38:40] * j_ack (n=j_ack@p57A40B03.dip0.t-ipconnect.de) Quit (Read error: 110 (Connection timed out))
[18:40:10] * khasim (n=a0393720@192.163.20.231) has joined #beagle
[18:47:02] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) Quit (Read error: 131 (Connection reset by peer))
[18:47:45] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[18:50:06] * Meiz_n810 (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #Beagle
[18:52:54] <djlewis_> airman00_: and you checked your sys clock?
[18:53:12] * j_ack (n=j_ack@p57A40A25.dip0.t-ipconnect.de) has joined #beagle
[18:54:35] <djlewis_> airman00_: still, nano should be available for opkg install.
[19:02:11] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) has joined #beagle
[19:02:24] * mcz_br (n=jircii@201.86.12.19.dynamic.adsl.gvt.net.br) has joined #beagle
[19:02:32] <mcz_br> hello, everybody
[19:02:48] <mcz_br> does anyone have experience with I2C and beagle?
[19:07:04] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (Read error: 110 (Connection timed out))
[19:09:06] * mrc_001 (n=mrc_001@212-183-118-91.adsl.highway.telekom.at) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * rsalveti (n=rsalveti@200.184.118.130) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * mpr (n=mpr@aggr.com) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * ScriptRipper (n=martin@opensuse/member/MartinMohring) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * jeremychang (n=jeremy@61-30-10-70.static.tfn.net.tw) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * Donald--_ (i=donald82@xob.kapsi.fi) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * cranberry (n=mosttw@lug-0.csse.rose-hulman.edu) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * ynezz (i=ynezz@ibawizard.net) Quit (orwell.freenode.net irc.freenode.net)
[19:09:06] * Meiz_n810 (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * airman00_ (n=eric@ool-457b3f4c.dyn.optonline.net) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * Crofton (n=balister@adsl-76-200-183-30.dsl.pltn13.sbcglobal.net) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * robclark (n=robclark@nat/ti/x-kdxiwnhoaegbnxvz) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * hyc_tb (n=ai@76.91.220.157) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * ShadowJK (i=jk@terminus.enivax.net) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * AK6L (n=xunil@nowai.yar.ly) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * shenki (n=joel@202.174.42.5) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * armin76 (n=armin@gentoo/developer/armin76) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * nullpuppy (n=dustin@c-98-237-195-243.hsd1.wa.comcast.net) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * jconnolly (n=jconnoll@firebug.buglabs.net) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * bkero (n=bkero@osuosl/staff/bkero) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * AndrevS (n=Andre@ks26301.kimsufi.com) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * rthc (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] * Crofton|work (n=balister@pool-71-171-31-89.nwrknj.east.verizon.net) Quit (orwell.freenode.net irc.freenode.net)
[19:09:07] <djlewis_> Is armv7a correct choice for BB compatibility for Angstrom feeds?
[19:10:05] <prpplague> mcz_br: i2c on the beagle is pretty solid and uses the generic i2c kernel framework
[19:10:52] * cody___ (n=cody@dslb-084-056-091-053.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
[19:11:04] * Meiz_n810 (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #beagle
[19:11:04] * airman00_ (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[19:11:04] * Crofton (n=balister@adsl-76-200-183-30.dsl.pltn13.sbcglobal.net) has joined #beagle
[19:11:04] * mrc_001 (n=mrc_001@212-183-118-91.adsl.highway.telekom.at) has joined #beagle
[19:11:04] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) has joined #beagle
[19:11:04] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
[19:11:04] * mpr (n=mpr@aggr.com) has joined #beagle
[19:11:04] * robclark (n=robclark@nat/ti/x-kdxiwnhoaegbnxvz) has joined #beagle
[19:11:04] * ScriptRipper (n=martin@opensuse/member/MartinMohring) has joined #beagle
[19:11:04] * hyc_tb (n=ai@76.91.220.157) has joined #beagle
[19:11:04] * ShadowJK (i=jk@terminus.enivax.net) has joined #beagle
[19:11:04] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) has joined #beagle
[19:11:04] * DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) has joined #beagle
[19:11:04] * jeremychang (n=jeremy@61-30-10-70.static.tfn.net.tw) has joined #beagle
[19:11:04] * Donald--_ (i=donald82@xob.kapsi.fi) has joined #beagle
[19:11:04] * rthc (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) has joined #beagle
[19:11:04] * AK6L (n=xunil@nowai.yar.ly) has joined #beagle
[19:11:04] * ynezz (i=ynezz@ibawizard.net) has joined #beagle
[19:11:04] * AndrevS (n=Andre@ks26301.kimsufi.com) has joined #beagle
[19:11:04] * Crofton|work (n=balister@pool-71-171-31-89.nwrknj.east.verizon.net) has joined #beagle
[19:11:04] * armin76 (n=armin@gentoo/developer/armin76) has joined #beagle
[19:11:04] * bkero (n=bkero@osuosl/staff/bkero) has joined #beagle
[19:11:04] * jconnolly (n=jconnoll@firebug.buglabs.net) has joined #beagle
[19:11:04] * cranberry (n=mosttw@lug-0.csse.rose-hulman.edu) has joined #beagle
[19:11:04] * shenki (n=joel@202.174.42.5) has joined #beagle
[19:11:04] * nullpuppy (n=dustin@c-98-237-195-243.hsd1.wa.comcast.net) has joined #beagle
[19:11:10] * Darren (n=darrenet@nat/ti/x-jgrwvevbrmczblgx) has joined #beagle
[19:12:15] * hyc_tb (n=ai@76.91.220.157) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * airman00_ (n=eric@ool-457b3f4c.dyn.optonline.net) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * AK6L (n=xunil@nowai.yar.ly) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * armin76 (n=armin@gentoo/developer/armin76) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * shenki (n=joel@202.174.42.5) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * nullpuppy (n=dustin@c-98-237-195-243.hsd1.wa.comcast.net) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * jconnolly (n=jconnoll@firebug.buglabs.net) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * bkero (n=bkero@osuosl/staff/bkero) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * rthc (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * ShadowJK (i=jk@terminus.enivax.net) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * Crofton|work (n=balister@pool-71-171-31-89.nwrknj.east.verizon.net) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * Crofton (n=balister@adsl-76-200-183-30.dsl.pltn13.sbcglobal.net) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * robclark (n=robclark@nat/ti/x-kdxiwnhoaegbnxvz) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * Meiz_n810 (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * AndrevS (n=Andre@ks26301.kimsufi.com) Quit (orwell.freenode.net irc.freenode.net)
[19:12:15] * AK6L` (n=xunil@nowai.yar.ly) has joined #beagle
[19:12:15] * ShadowJK_ (i=jk@terminus.enivax.net) has joined #beagle
[19:12:18] * rthc_ (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) has joined #beagle
[19:12:18] * nullpupp1 (n=dustin@c-98-237-195-243.hsd1.wa.comcast.net) has joined #beagle
[19:12:21] * jconnoll1 (n=jconnoll@firebug.buglabs.net) has joined #beagle
[19:12:29] * Crofton|work (n=balister@pool-71-171-31-89.nwrknj.east.verizon.net) has joined #beagle
[19:12:34] * bkero (n=bkero@osuosl/staff/bkero) has joined #beagle
[19:12:35] * shenki (n=joel@202.174.42.5) has joined #beagle
[19:12:37] * Meiz_n810 (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #Beagle
[19:12:38] * Crofton (n=balister@adsl-76-200-183-30.dsl.pltn13.sbcglobal.net) has joined #beagle
[19:12:47] * armin76 (n=armin@gentoo/developer/armin76) has joined #beagle
[19:12:49] * AndrevS (n=Andre@ks26301.kimsufi.com) has joined #beagle
[19:13:05] * Xerion (i=xerion@82.170.197.160) has joined #beagle
[19:13:52] * cody___ (n=cody@dslb-084-056-110-244.pools.arcor-ip.net) has joined #beagle
[19:22:30] * _koen_ (n=x0115699@nat/ti/x-oatttjmkucbvmwbu) has joined #beagle
[19:24:30] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[19:25:37] <airman00> hey guys, think you can help me out with finding out how to install wxWindows on the BeagleBoard?
[19:30:19] <mcz_br> prpplague: have you experience with i2c?
[19:30:29] <mcz_br> i am trying to utilize i2c3
[19:30:41] <mcz_br> with a touchscreen ... in case, it is the TSC2007
[19:30:55] <mcz_br> well .. the driver is ok ...
[19:31:03] <mcz_br> but
[19:31:09] <mcz_br> it is not working
[19:31:22] <mcz_br> so, i put the beagle in the oscilloscope
[19:31:34] <mcz_br> and there is not I2C clock
[19:31:37] <mcz_br> or I2C data
[19:31:39] <mcz_br> in the buses
[19:31:55] <mcz_br> so ... i do not know what is happening
[19:32:40] <prpplague> mcz_br: well there are a number of things that could be at issue, first would be to make sure that you have the pinmux set correctly in the bootloader and kernel
[19:34:00] * Xerion_ (i=xerion@82-170-197-160.ip.telfort.nl) has joined #beagle
[19:34:54] * Xerion (i=xerion@82.170.197.160) Quit (Read error: 145 (Connection timed out))
[19:34:54] * Xerion_ is now known as Xerion
[19:35:25] <mcz_br> prpplague: the pinmux is defined in mux.c, right?
[19:35:45] <mcz_br> i am using the defaults
[19:35:59] <mcz_br> in the beagle datasheet ... the default have i2c3 enabled
[19:36:28] * robclark (n=robclark@nat/ti/x-moszogzoafsakrlz) has joined #beagle
[19:36:47] <prpplague> mcz_br: best way to make sure yourself
[19:37:42] <prpplague> mcz_br: what you said i2c3?
[19:37:51] <prpplague> mcz_br: how the heck are you using i2c3?
[19:38:15] <mcz_br> i am using I2C3 because I2C2 throws a lot timeout errors
[19:38:45] <prpplague> hmm, never had any problems with i2c2
[19:39:26] <mcz_br> what do you use with i2c2?
[19:39:38] * ddompe (n=ddompe@200.122.155.113) has joined #beagle
[19:40:38] <prpplague> mcz_br: rtc and eeprom, among some of the things
[19:41:10] <prpplague> mcz_br: i have used the TSC2003/TSC2007 on the i2c before as well
[19:41:17] <mcz_br> really?
[19:41:44] <mcz_br> could you send me a sample of your board-omap3beagle.c ?
[19:41:53] <mcz_br> the part where you enable the TSC2007
[19:42:12] <prpplague> mcz_br: sorry no, the device isn't being distributed as of yet
[19:42:53] <mcz_br> ok .. i understand
[19:43:09] <mcz_br> TSC2007 driver is being loaded here
[19:43:23] <mcz_br> creates the /dev entry
[19:43:38] <mcz_br> but the eletric signals are weird
[19:43:46] <mcz_br> both to i2c2 and i2c3
[19:45:49] <mcz_br> do you utilize the interrupted mode?
[19:46:35] <prpplague> mcz_br: i didn't dig into the i2c driver very deeply since it "just worked"
[19:47:28] <prpplague> mcz_br: why not have a look at the configuration for the i2c2 for rtc and eeprom on the zippy board
[19:48:21] <mcz_br> where can i find this code?
[19:48:56] <prpplague> http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=8ded6c1580b907494b0ea95e36d91ca8d64122e8
[19:48:57] * Quist (i=55512753@gateway/web/freenode/x-gayhkctefnilyjao) Quit ("Page closed")
[19:49:04] <mcz_br> thanks
[19:49:07] <prpplague> np
[19:55:42] <mcz_br> i am doing the same of zippy code
[19:56:09] <mcz_br> i think the timeouts in I2C2 are caused by the absence of pullup resistors
[19:58:45] <mcz_br> did you utilize additional pullup resistor in zippy board?
[20:02:14] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit (Read error: 104 (Connection reset by peer))
[20:04:19] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
[20:05:16] * _koen_ (n=x0115699@nat/ti/x-oatttjmkucbvmwbu) Quit ("Leaving.")
[20:06:33] <prpplague> mcz_br: yes we have pullup resistors
[20:06:48] <mcz_br> i think that my problem is there
[20:07:02] <mcz_br> i am putting pullup resistors now
[20:07:02] * nullpupp1 is now known as nullpuppy
[20:07:06] <mcz_br> to check i2c2 again
[20:08:24] * niclas (n=n-anderb@nat/ti/x-uxstyjysybucsoah) has joined #beagle
[20:11:13] * Zeta_server (n=zeta@cpe-98-157-217-96.ma.res.rr.com) Quit (Read error: 60 (Operation timed out))
[20:19:18] * rthc (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) has joined #beagle
[20:22:15] <mcz_br> the electrical problem persists
[20:22:24] <mcz_br> i added pullup resistors of 50k
[20:22:32] <mcz_br> and it stays the same thing
[20:23:11] * ant__ (n=andrea@host106-249-dynamic.4-87-r.retail.telecomitalia.it) has joined #beagle
[20:24:42] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit (Read error: 104 (Connection reset by peer))
[20:24:43] * jrmuizel_ (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
[20:25:03] <airman00> can someone help me find the equivalent of Ubuntu's libwxgtk2.8-dev for Angstrom on BeagleBoard
[20:25:04] * rthc_ (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) Quit (Read error: 110 (Connection timed out))
[20:25:47] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) Quit (Remote closed the connection)
[20:26:00] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) has joined #beagle
[20:28:50] * hyc_tb (n=hyc@76.91.220.157) has joined #beagle
[20:29:35] * AK6L` is now known as AK6L
[20:31:19] <Crofton> Segmentation faultUnhandled fault: external abort on non-linefetch (0x1008) at 0xc8858080
[20:31:24] <Crofton> make any sense
[20:31:40] <Crofton> airman00, I have had trouble builidng wx-2.8 on Angstrom
[20:31:54] <Crofton> I have uncommited work for wx-2.9
[20:40:24] <airman00> so I'm pretty much screwed for that? Its impossible to do?
[20:41:23] * rhk (n=rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) Quit ("ChatZilla 0.9.85 [Firefox 3.0.14/2009082707]")
[20:42:39] * Meiz_n810 (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (Read error: 110 (Connection timed out))
[20:46:46] * ant__ (n=andrea@host106-249-dynamic.4-87-r.retail.telecomitalia.it) has left #beagle
[20:48:29] * ArteK (n=Artur@81.15.241.96) has left #beagle
[20:55:48] * Patrick (i=c05e5e69@gateway/web/freenode/x-vtepcdgtrhebrzns) has joined #beagle
[20:56:16] * Patrick is now known as Guest70010
[20:58:55] <Guest70010> Does the beagle support larger SDHC cards? The "recommended/verified" ones are all 4 GB - would it support a 32 GB card?
[20:59:11] <airman00> anybody here run Ubuntu on their BB?
[21:00:03] <mru> Guest70010: I use 8GB cards
[21:00:53] <ojn> airman00: I run it on a overo
[21:02:54] * jrmuizel_ (n=jrmuizel@mozca02.ca.mozilla.com) Quit (Remote closed the connection)
[21:07:12] * airman00 (n=eric@ool-457b3f4c.dyn.optonline.net) Quit ()
[21:19:14] * prpplague is now known as prpplague_afk
[21:25:44] <djlewis_> Guest70010: please try it and let us know :)
[21:26:07] * djlewis_ uses 4GB Transcend SDHC class 6 cards.
[21:27:05] <djlewis_> its been crazy this aft. three clients waiting and two lines same time... arrgh!
[21:27:17] <djlewis_> phone lines that is.
[21:29:29] <ds2> Back
[21:30:08] <djlewis_> hi ds2
[21:30:31] * ArteK (n=Artur@81.15.241.96) has joined #beagle
[21:31:17] <mcz_br> hey, guys
[21:31:23] <mcz_br> i am using a compiled uboot
[21:31:26] <mcz_br> and works fine
[21:31:42] <mcz_br> but where could i find the source code of uboot for Rev C?
[21:33:06] <ds2> hey djlewis
[21:33:31] * rcranetx (n=rcranetx@nat/ti/x-uhrpfdgpnplkkhfn) has joined #beagle
[21:34:01] * orbarron is now known as orbarron|oOo
[21:36:19] * alecrim (n=alecrim@189.2.128.130) Quit ("Leaving")
[21:39:37] <djlewis_> mcz_br: http://elinux.org/BeagleBoard#U-Boot
[21:42:23] * rcranetx (n=rcranetx@nat/ti/x-uhrpfdgpnplkkhfn) Quit ("Leaving.")
[21:47:13] * wardred (n=wardred@75.142.253.144) has joined #beagle
[21:56:43] * ArteK (n=Artur@81.15.241.96) has left #beagle
[21:56:52] <mcz_br> thanks!
[22:02:07] * brijesh (n=bksingh@nat/ti/x-afqtblgicyhmdlwh) Quit ()
[22:03:00] * Guest70010 (i=c05e5e69@gateway/web/freenode/x-vtepcdgtrhebrzns) Quit (Ping timeout: 180 seconds)
[22:09:17] * florian (n=fuchs@g228201172.adsl.alicedsl.de) Quit ("Verlassend")
[22:09:55] * mcz_brazil (n=jircii@201.86.33.52) has joined #beagle
[22:10:35] * mcz_br (n=jircii@201.86.12.19.dynamic.adsl.gvt.net.br) Quit (Read error: 104 (Connection reset by peer))
[22:19:11] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) Quit ("Leaving")
[22:19:27] * mcz_brazil (n=jircii@201.86.33.52) Quit ("mcz_brazil has no reason")
[22:20:31] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit ("Leaving")
[22:21:21] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
[22:22:48] * dual (n=dual@5.79-160-122.customer.lyse.net) Quit (Remote closed the connection)
[22:29:50] * niclas (n=n-anderb@nat/ti/x-uxstyjysybucsoah) Quit ()
[22:29:56] * cody___ (n=cody@dslb-084-056-110-244.pools.arcor-ip.net) Quit ("Leaving")
[22:30:42] * cody (n=cody@dslb-084-056-110-244.pools.arcor-ip.net) has joined #beagle
[22:31:18] * mrc_001_ (n=mrc_001@91-113-112-111.adsl.highway.telekom.at) has joined #beagle
[22:31:30] * ds2 (i=noinf@netblock-66-245-251-24.dslextreme.com) Quit (Read error: 104 (Connection reset by peer))
[22:33:09] * Christos_N (n=Christos@ppp-94-66-54-32.home.otenet.gr) Quit ("Until we meet again")
[22:34:34] <furibondox> if I use the updated u-boot from OE (2009.05+r30+git) and I need to have UART2 enabled, I also need to setup the MUX in the kernel or is enough the u-boot settings?
[22:37:03] * ds2 (i=noinf@netblock-66-245-251-24.dslextreme.com) has joined #beagle
[22:42:01] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
[22:42:42] * mrc_001 (n=mrc_001@212-183-118-91.adsl.highway.telekom.at) Quit (Read error: 110 (Connection timed out))
[22:42:43] * mrc_001_ is now known as mrc_001
[22:45:24] * mrc_001_ (n=mrc_001@212-183-114-191.adsl.highway.telekom.at) has joined #beagle
[22:47:31] * spvensko (n=spvensko@adsl-072-151-081-078.sip.rmo.bellsouth.net) Quit ()
[22:52:56] * mrc_001 (n=mrc_001@91-113-112-111.adsl.highway.telekom.at) Quit (Read error: 60 (Operation timed out))
[22:52:56] * mrc_001_ is now known as mrc_001
[22:56:27] <djlewis_> later guys...
[22:57:30] * djlewis_ (i=41401e0d@gateway/web/freenode/x-bfyjxeqdjmaqgfmh) Quit ("Page closed")
[23:06:17] * Darren (n=darrenet@nat/ti/x-jgrwvevbrmczblgx) Quit (Remote closed the connection)
[23:10:40] * robclark (n=robclark@nat/ti/x-moszogzoafsakrlz) Quit (Remote closed the connection)
[23:20:03] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) Quit ("sl??n")
[23:24:11] * prpplague (n=dave123_@ppp-70-244-82-150.dsl.rcsntx.swbell.net) has joined #beagle
[23:25:35] * BThompson (n=a0193480@nat/ti/x-hrepvogoohhtoury) Quit (Remote closed the connection)
[23:26:03] * mrc_001 (n=mrc_001@212-183-114-191.adsl.highway.telekom.at) Quit ()
[23:29:28] * furibondox (n=linux_us@net-93-65-146-184.cust.dsl.vodafone.it) Quit ("Leaving")
[23:31:30] * ddompe (n=ddompe@200.122.155.113) Quit ("ddompe is leaving")
[23:35:44] * n6pfk (n=mike@96.238.186.191) Quit (Read error: 113 (No route to host))
[23:36:44] * n6pfk (n=mike@96.238.186.191) has joined #beagle
[23:43:05] * n6pfkk (n=mike@96.238.186.191) has joined #beagle
[23:46:41] * n6pfk (n=mike@96.238.186.191) Quit (Read error: 148 (No route to host))

These logs were automatically created by BeagleLogBot on irc.freenode.net using the Java IRC LogBot.

See http://microformats.org/wiki/mflogbot for more information.