#beagle IRC Log on BeagleBoard.org

Join the chat at beagleboard.org/chat

IRC Log for 2010-08-02

Timestamps are in UTC.

  1. [00:01:20] <rcn-ee> RobotGuy, number one faq at the moment.. X-loader 1.4.4ss only works with U-boot 2010-03.. REread the directions here to re-flash.. http://www.angstrom-distribution.org/demo/beagleboard/
  2. [00:02:55] * jayabharath (~a0866114@nat/ti/x-tkbrxswlzznvinxj) has joined #beagle
  3. [00:11:35] <RobotGuy> I have X-Loader 1.4.2 on my Beagle
  4. [00:12:37] <djlewis> RobotGuy: still not booting?
  5. [00:13:08] <rcn-ee> RobotGuy, yeap, that one won't work.. upgrade it.. or use a u-boot from 2009..
  6. [00:21:09] * janneg (~janne@chybek.jannau.net) Quit (Remote host closed the connection)
  7. [00:27:32] * metaliving (~victorere@athedsl-4393365.home.otenet.gr) Quit (Quit: Leaving)
  8. [00:29:17] * raster (raster@enlightenment/developer/raster) has joined #beagle
  9. [00:33:15] <RobotGuy> I did those commands and now my Beagle won't boot.
  10. [00:35:03] <rcn-ee> RobotGuy, did you copy MLO and u-boot.bin to your sd card?
  11. [00:35:08] <RobotGuy> Yes
  12. [00:35:52] <rcn-ee> what happens when you hold down the user key? then plug in power?
  13. [00:36:00] <rcn-ee> s/key/button/g
  14. [00:37:39] <RobotGuy> Nothing happens.
  15. [00:38:06] <rcn-ee> okay, you'r working with a linux development pc right?
  16. [00:38:14] <RobotGuy> I will have to recover my Beagle.
  17. [00:38:19] <thurbad> not even the 40T message or 40whatever?
  18. [00:38:27] <RobotGuy> Not even that.
  19. [00:39:24] <rcn-ee> RobotGuy, if your using atleast a linux development pc.. here's my script (there's about 5 different ones) to take care of it.. http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot (no worries your probally the 100th person i've pointed to there..)
  20. [00:46:30] <RobotGuy> Your script says it doesn't see /dev/sdc1 which is there.
  21. [00:46:43] * n6pfk (~n6pfk__@pool-173-53-57-150.rcmdva.fios.verizon.net) has joined #beagle
  22. [00:47:22] <thurbad> sdc is usually a hard drive, are you sure that's the right device?
  23. [00:47:38] <RobotGuy> Yes, it is the correct device.
  24. [00:47:56] <thurbad> is the mmc mounted?
  25. [00:48:23] <RobotGuy> No, but I have tried it mounted also.
  26. [00:49:46] <RobotGuy> .. /dev/sdc1 is a 100 MB VFAT partition.
  27. [00:50:47] <rcn-ee> RobotGuy, "sudo fdisk -l" will give you a listting of all
  28. [00:51:15] <RobotGuy> Yes, I know.
  29. [00:52:06] <RobotGuy> My /dev/sdc is the SD Card.
  30. [00:53:36] <rcn-ee> weird.. its works fine for me, just upgrading a couple beagles tonight.. your system isn't by chance non-english?
  31. [00:53:56] <RobotGuy> It is English.
  32. [00:55:34] <rcn-ee> just "./mk_mmc.sh --mmc /dev/sdc" right?
  33. [00:56:48] <RobotGuy> I see my error now. I was doing "./mk_mmc.sh --mmc /dev/sdc1"
  34. [00:56:51] <thurbad> oh.. I had to run it as sudo sh mk_mmc.sh .... otherwise I got errors trying to just run it as sudo ./mk_mmc.sh I probably didn't set it as executable
  35. [00:57:17] <RobotGuy> I am root.
  36. [00:58:21] <rcn-ee> bzr should keep it executable.. (well it does in lucid/maverick) it should be run as a user (it uses sudo when required) it could check for that, but it's simple..
  37. [00:58:53] <RobotGuy> I ran it as root and it seems to have works fine.
  38. [00:59:45] <rcn-ee> cool.. btw did it nicely error out with "/dev/sdc1" atleast, i should add to the doc just call the main device..
  39. [01:01:02] <RobotGuy> Yes, it did the right thing and errored out when I used /dev/sdc1
  40. [01:01:39] <RobotGuy> Yes, that clarification would be useful and show an example - that will help newbies.
  41. [01:04:20] <RobotGuy> Often, examples are more valuable than the actual instructions.
  42. [01:06:10] <RobotGuy> Thanks for the assistance. :)
  43. [01:06:51] <rcn-ee> no problem.. i'll tweak the instuctions with an exampe..
  44. [01:07:07] <RobotGuy> I think that will help everyone. :)
  45. [01:07:52] <RobotGuy> Examples are very important, especially with technical subjects and all levels of people's experience.
  46. [01:09:43] <rcn-ee> Well that's one reason most things on the wiki are scripts now.. the technical examples just kept getting longer and longer.. ;)
  47. [01:10:18] <RobotGuy> I understand that. Scripts are good, but can't replace understanding.
  48. [01:10:51] <rcn-ee> i think this helps clarify it: http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot ;)
  49. [01:11:00] <RobotGuy> I do understand what is being done, but my problem was matching up the right versions of everything I needed.
  50. [01:12:02] <rcn-ee> yeah the notes for the X-loader 1.4.2 and u-boot 2009 -> 1.4.4ss/u-boot 2010-03 is a complete mess
  51. [01:14:43] <RobotGuy> I made a small edit, which I believe adds more needed clarification.
  52. [01:15:34] <RobotGuy> I've written a bit of stuff on elinux.org. :)
  53. [01:18:34] * thurbad (~nathan@2002:4c5b:3a:0:223:69ff:fe72:61cf) Quit (Read error: Operation timed out)
  54. [01:19:05] <rcn-ee> it looks good... sometimes i almost feel spoiled with the stuff on elinux specially when working on non-omap devcies.. Wondering why someone didn't write something down.. (thinking freescale and nvidia arm)
  55. [01:19:28] * thurbad (~nathan@2002:4c5b:3a:0:223:69ff:fe72:61cf) has joined #beagle
  56. [01:22:21] <RobotGuy> That's the beauty of collaboration. :) We can all add our knowledge to the whole to make it better.
  57. [01:23:46] <RobotGuy> I helped write some of the stuff for Hammer Board.
  58. [01:24:23] <rcn-ee> i still haven't powered mine up.. the xm and panda keep getting in the way..
  59. [01:24:26] <RobotGuy> I never did get along well with Buildroot though.
  60. [01:25:03] <RobotGuy> I soooo want an XM to put on my robots. I need that onboard 4 port USB hub.
  61. [01:25:32] <rcn-ee> i know they are getting close.. gerald has an update on the email group.. so should be any 'week' now.. ;)
  62. [01:26:15] <RobotGuy> I know they are working really hard to resolve the issue(s) that are causing problems.
  63. [01:37:25] * khasim (~a0393720@192.163.20.231) has joined #beagle
  64. [01:38:15] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  65. [01:46:07] * gdm (~gdm@190.55.34.222) has joined #beagle
  66. [01:51:07] <RobotGuy> I think my beagle still is not booting.
  67. [01:51:35] <RobotGuy> It has stopped at "usb 1-2.4: configuration #1 chosen from 1 choice"
  68. [01:54:09] <thurbad> I had problems with kernel 2.6.32 when the otg was plugged in
  69. [01:55:02] <RobotGuy> My OTG is not plugged in.
  70. [01:55:40] <thurbad> it also didn't like my laser mouse plugged into a self powered hub for some reason
  71. [01:55:56] <RobotGuy> My hub is not self powered.
  72. [01:56:14] <RobotGuy> It could be, but is not at this time.
  73. [02:01:53] <rcn-ee> save your self some trouble shooting time, power the hub with an external power supply
  74. [02:04:14] <ds2> and don't use a UPS ;)
  75. [02:04:28] <RobotGuy> I have my beagle powered by a 5V wall wart.
  76. [02:04:53] <RobotGuy> I need ALL the hub's ports.
  77. [02:05:11] <rcn-ee> yeah... but the ehci doesn't supply that much..
  78. [02:05:34] <RobotGuy> I don't have another 5V wall wart.
  79. [02:05:36] * jayabharath (~a0866114@nat/ti/x-tkbrxswlzznvinxj) Quit (Ping timeout: 240 seconds)
  80. [02:05:49] <rcn-ee> or usb hub didn't come with one?
  81. [02:05:57] <rcn-ee> or/your
  82. [02:06:10] <RobotGuy> No, it did not come with one. The one I have was purchased separately.
  83. [02:07:33] <thurbad> does it boot if you unplug your hub? just for testing purposes
  84. [02:07:50] <RobotGuy> When I was 17, I was heading in the directions of these young people. I just wasn't able to proceed.
  85. [02:07:59] <RobotGuy> Oops, wrong chat.
  86. [02:08:09] <thurbad> ds2, why not use a ups?
  87. [02:08:14] <RobotGuy> I have unplugged the hub and am rebooting.
  88. [02:09:00] <RobotGuy> It's getting further now, but has stopped again, which I believe is normal for a first boot.
  89. [02:09:31] <RobotGuy> I will need to get another 5V wall wart for development use.
  90. [02:09:58] <thurbad> if you're using an x-server, some servers take a long time on the first boot
  91. [02:10:03] <ds2> thurbad: ask rcn-ee ;)
  92. [02:10:28] <RobotGuy> This is the Angstrom demo image, so it might take awhile for this first boot.
  93. [02:13:18] <rcn-ee> thurbad, cause they don't always survive lighting strikes.. ;) and you lose hardware on the side.. cheap crappy ups..
  94. [02:14:16] <thurbad> so what do you use instead, just a surge protector?
  95. [02:14:35] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
  96. [02:15:02] <rcn-ee> nah.. a better ups with higher ratings.. we've had some nasty storms come thru northern minnesota this summer...
  97. [02:15:24] <thurbad> luckily we generally have sheet lightningrather than lightning that strikes the ground here in so-cal
  98. [02:16:48] <rcn-ee> it's like what you gonna do.. oh yeah upgrade! ;)
  99. [02:18:19] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) Quit (Quit: Lost terminal)
  100. [02:19:20] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Ping timeout: 265 seconds)
  101. [02:20:31] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) has joined #beagle
  102. [02:37:15] * jkridner_ (~jason@pdpc/supporter/active/jkridner) has joined #beagle
  103. [02:39:40] * jkridner (~jason@pdpc/supporter/active/jkridner) Quit (Ping timeout: 265 seconds)
  104. [02:39:40] * jkridner_ is now known as jkridner
  105. [02:40:15] * khasim (~a0393720@192.163.20.231) Quit (Ping timeout: 264 seconds)
  106. [02:43:27] <RobotGuy> How long does it usually take for a first boot of the Angstrom Demo system?? Mine is still stuck.
  107. [02:44:19] <rcn-ee> if it's more then 1-5 mins it's way too long...
  108. [02:44:26] * scrp3l (~scrp3l@201.250.178.201) has joined #beagle
  109. [02:44:32] <RobotGuy> It's WAY too long now then.
  110. [02:45:16] <rcn-ee> first try rebooting it, maybe the script finished but didn't move on...
  111. [02:45:48] <RobotGuy> Rebooting now and it stopped at the same place it was stuck at.
  112. [02:46:49] <rcn-ee> weird... can you get us a serial log from power on too stuck.. (dump it to pastebin) haven't booted angstrom in half a year, but i'll take a look..
  113. [02:47:12] <RobotGuy> Sure, I will do that - won't take long.
  114. [02:48:00] * Zoxc (~zoxc@ti0128a340-dhcp0032.bb.online.no) Quit ()
  115. [02:48:30] * n6pfk (~n6pfk__@pool-173-53-57-150.rcmdva.fios.verizon.net) Quit (Remote host closed the connection)
  116. [02:49:58] * n6pfk (~n6pfk__@pool-173-53-57-150.rcmdva.fios.verizon.net) has joined #beagle
  117. [02:50:46] * new2bb (a4a4fa0a@gateway/web/freenode/ip.164.164.250.10) has joined #beagle
  118. [02:51:32] <RobotGuy> rcn-ee: http://pastebin.com/8vHa5F6p
  119. [02:53:40] <rcn-ee> weird, but doesn't look like it passed the root location, just : Kernel command line: console=ttyS2,115200n8 vram=12M omapdss.def_disp=dvi omapfb.mode=dvi:1024xt
  120. [02:54:36] <rcn-ee> i would add "root=/dev/mmcblk0p2 rootwait rootfstype=ext3 rw" to your bootarg
  121. [02:55:45] <RobotGuy> OK
  122. [03:03:16] * cody (~cody@dslb-084-056-076-060.pools.arcor-ip.net) Quit (Ping timeout: 240 seconds)
  123. [03:05:34] * cody (~cody@dslb-084-056-111-153.pools.arcor-ip.net) has joined #beagle
  124. [03:11:54] <RobotGuy> rcn-ee: http://pastebin.com/1bcFL51E <-- latest boot log. Stuck now.
  125. [03:16:06] * jkridner1 (~a0321898@nat/ti/x-ltkocwpaswqmxcov) has joined #beagle
  126. [03:20:15] <rcn-ee> RobotGuy, double check your bootarg.. the root=/something will show up on Line 54: Kernel command line: console=ttyS2,115200n8 vram=12M omapdss.def_disp=dvi omapfb.mode=dvi:1024t (and it's not..)
  127. [03:22:34] <RobotGuy> My bootargs = "console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait omapfb.video_mode=1024x768MR-24@60"
  128. [03:23:10] <RobotGuy> I have a 1920x1200 capable monitor.
  129. [03:23:34] <RobotGuy> 25.5" wide screen :D
  130. [03:31:00] <RobotGuy> I do not know why my beagle is not booting.
  131. [03:32:57] * soman (~somnath@118.102.130.6) has joined #beagle
  132. [03:40:12] * chainsawbike (~chainsawb@202-0-50-230.cable.telstraclear.net) has joined #beagle
  133. [03:41:51] <RobotGuy> I didn't delete the boot.scr - just did that and am rebooting.
  134. [03:43:17] <RobotGuy> Why is it still looking for a ubifs file system?
  135. [03:43:35] <RobotGuy> On device 253:1
  136. [03:46:16] <RobotGuy> What is the vram=12M parameter for??
  137. [03:55:28] <thurbad> sets the amount of ram dedicated to the display
  138. [03:57:08] <RobotGuy> Ahhhh, OK.
  139. [03:57:20] <RobotGuy> My beagle is still stuck.
  140. [03:58:10] <thurbad> at the same place?
  141. [03:58:38] * KosiNuss_ (~tom@p549203B8.dip0.t-ipconnect.de) has joined #beagle
  142. [03:59:08] <RobotGuy> Yes
  143. [03:59:09] * duffolonious (~bryan@75-168-87-92.mpls.qwest.net) Quit (Ping timeout: 240 seconds)
  144. [04:00:06] <RobotGuy> Is "bootcmd=run autoboot" right?
  145. [04:01:27] * duffolonious (~bryan@75-168-87-92.mpls.qwest.net) has joined #beagle
  146. [04:01:52] * KosiNuss (~tom@p5492136F.dip0.t-ipconnect.de) Quit (Ping timeout: 240 seconds)
  147. [04:01:55] <thurbad> are you using a boot.scr?
  148. [04:02:19] <RobotGuy> Not now.
  149. [04:03:42] <thurbad> it looks like it's booting from nand with android to me
  150. [04:04:34] <RobotGuy> I did have Android in NAND, but it should boot only the SD if a card is present.
  151. [04:04:36] <thurbad> line 26 of your boot log says no mmc was found
  152. [04:05:07] <RobotGuy> Was working fine like that. There is a wrong "mmcinit" command somewhere, but I don't see it.
  153. [04:05:24] <thurbad> line 27
  154. [04:06:13] <thurbad> it should probably be mmc init, not run together as one word in the bootloader version you have, I believe
  155. [04:07:31] <RobotGuy> Yes, but where is the errant command? Where do I change it? I don't see where.
  156. [04:08:23] <thurbad> can you interrupt the boot sequence, run printenv and pastebin the environment
  157. [04:09:06] <RobotGuy> Sure
  158. [04:11:06] <RobotGuy> http://pastebin.com/W79SM1P7
  159. [04:11:07] <thurbad> mine has bootcmd=if mmc init.... that's probably where your stray mmcinit is
  160. [04:11:40] <RobotGuy> Is "bootcmd=run autoboot" right?
  161. [04:12:37] <RobotGuy> A bug in autoboot?
  162. [04:12:43] <thurbad> yeah, that's fine, your autoboot is an alias to several commands
  163. [04:13:01] <RobotGuy> I don't see the bad mmcinit command
  164. [04:13:19] <thurbad> line 35
  165. [04:14:08] <RobotGuy> I must be blind
  166. [04:14:23] <thurbad> you have a pretty complex environment configured
  167. [04:15:16] * rmattes (~rmattes@c-98-235-164-215.hsd1.pa.comcast.net) has joined #beagle
  168. [04:18:19] <thurbad> have you tried reseating your SD card?
  169. [04:19:43] <RobotGuy> Several times
  170. [04:21:38] <thurbad> have you inspected the socket?
  171. [04:22:17] <thurbad> the mmc socket on my first beagle had a pin snap off within a week of receiving it :/
  172. [04:22:55] <thurbad> but you were able to recover using the mmc tonight, right?
  173. [04:23:54] * drinkcat (~nicolas@119.56.3.26) has joined #beagle
  174. [04:24:55] <RobotGuy> It's booting now! I had to put a kernel on the SD card.
  175. [04:25:29] <thurbad> oh, you didn't have a uImage on the rootfs partition?
  176. [04:26:00] <RobotGuy> No, I didn't, silly me.
  177. [04:26:02] <thurbad> ... that would do it too
  178. [04:26:14] <RobotGuy> Indeed
  179. [04:26:41] <thurbad> the no mmc card found is a bad message for a missing uImage
  180. [04:28:13] <RobotGuy> Now I have to switch my mouse and keyboard to beagle so I can tinker with X. Thanks for assisting!
  181. [04:29:00] <thurbad> np, glad you got it working
  182. [04:29:04] * Redb3ard (~SF0010MAC@75.110.202.83) has joined #beagle
  183. [04:31:56] * heathkid (~heathkid2@173-121-106-33.pools.spcsdns.net) has joined #beagle
  184. [04:49:07] * Redb3ard (~SF0010MAC@75.110.202.83) Quit (Quit: Redb3ard)
  185. [04:50:12] * n6pfk (~n6pfk__@pool-173-53-57-150.rcmdva.fios.verizon.net) Quit (Remote host closed the connection)
  186. [04:51:20] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  187. [04:58:59] * heathkid (~heathkid2@173-121-106-33.pools.spcsdns.net) Quit (Quit: Leaving)
  188. [05:04:53] * Jefro (~jefro@cust-67-203-89-34.static.o1.com) has joined #beagle
  189. [05:07:56] * radhermit (~radhermit@radhermit-1-pt.tunnel.tserv3.fmt2.ipv6.he.net) Quit (Ping timeout: 252 seconds)
  190. [05:10:21] * radhermit (~radhermit@radhermit-1-pt.tunnel.tserv3.fmt2.ipv6.he.net) has joined #beagle
  191. [05:13:05] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  192. [05:15:54] * rmattes (~rmattes@c-98-235-164-215.hsd1.pa.comcast.net) Quit (Quit: rmattes)
  193. [05:16:01] * KosiNuss_ (~tom@p549203B8.dip0.t-ipconnect.de) Quit (Ping timeout: 276 seconds)
  194. [05:18:27] * robclark (~robclark@ppp-70-129-138-99.dsl.rcsntx.swbell.net) Quit (Quit: be seeing you)
  195. [05:20:50] * screwgoth (~raseel@122.170.32.94) has joined #beagle
  196. [05:29:33] * mchua_afk is now known as mchua
  197. [05:35:39] * khasim (~a0393720@192.163.20.231) has joined #beagle
  198. [05:43:35] * nitesh (~nitesh@122.169.50.238) has joined #beagle
  199. [05:54:25] * jpirko (~jirka@ip-89-103-91-100.net.upc.cz) has joined #beagle
  200. [06:06:27] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) has joined #beagle
  201. [06:16:00] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) Quit (Read error: Connection reset by peer)
  202. [06:16:36] * drinkcat (~nicolas@119.56.3.26) Quit (Ping timeout: 240 seconds)
  203. [06:17:44] * tsjsieb (~tsjsieb@194.109.164.83) has joined #beagle
  204. [06:19:57] * ravi (ca36af83@gateway/web/freenode/ip.202.54.175.131) has joined #beagle
  205. [06:20:07] <ravi> Hi what is GIT?
  206. [06:23:56] <dm8tbr> a DVCS
  207. [06:25:28] <eFfeM_work> ravi: http://lmgtfy.com/?q=git
  208. [06:26:55] * franktango (~a0746747@nat/ti/x-sniomyooqncvqmpf) has joined #beagle
  209. [06:31:34] * ogra (~ogra@ubuntu/member/ogra) Quit (Ping timeout: 260 seconds)
  210. [06:32:27] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  211. [06:32:32] * KosiNuss_ (~tom@p549203B8.dip0.t-ipconnect.de) has joined #beagle
  212. [06:32:40] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) Quit (Ping timeout: 240 seconds)
  213. [06:33:17] * jpirko (~jirka@ip-89-103-91-100.net.upc.cz) Quit (Quit: Leaving)
  214. [06:33:25] * harbaum (~quassel@et-1-20.gw-nat.bs.ka.oneandone.net) has joined #beagle
  215. [06:43:01] * screwgoth1 (~raseel@122.170.118.103) has joined #beagle
  216. [06:44:12] * KosiNuss_ (~tom@p549203B8.dip0.t-ipconnect.de) Quit (Quit: Leaving)
  217. [06:44:27] * alf__ (~alf@samothrace.apel.ee.upatras.gr) Quit (Ping timeout: 264 seconds)
  218. [06:45:07] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
  219. [06:45:10] <ravi> where can i get android kernel for beagle board
  220. [06:45:39] * alf__ (~alf@samothrace.apel.ee.upatras.gr) has joined #beagle
  221. [06:45:45] * screwgoth (~raseel@122.170.32.94) Quit (Ping timeout: 258 seconds)
  222. [06:46:02] * Gaston|Home (~Gaston@c-bd2ce353.155-1-64736c11.cust.bredbandsbolaget.se) Quit (Ping timeout: 240 seconds)
  223. [06:47:38] * screwgoth (~raseel@122.170.53.43) has joined #beagle
  224. [06:49:07] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) Quit (Quit: Leaving.)
  225. [06:49:18] * soman (~somnath@118.102.130.6) Quit (Ping timeout: 260 seconds)
  226. [06:50:30] * screwgoth1 (~raseel@122.170.118.103) Quit (Ping timeout: 265 seconds)
  227. [06:52:07] * amitk (~amit@a91-154-124-12.elisa-laajakaista.fi) has joined #beagle
  228. [06:52:48] <ravi> can anyone guide me where can i get android kernel
  229. [06:52:58] <ravi> for beagle board
  230. [06:53:52] * alf__ (~alf@samothrace.apel.ee.upatras.gr) Quit (Ping timeout: 265 seconds)
  231. [06:53:54] * alf__ (~alf@samothrace.apel.ee.upatras.gr) has joined #beagle
  232. [06:54:26] * calculus (~calculus@gentoo/user/calculus) Quit (Ping timeout: 260 seconds)
  233. [06:55:11] * _koen_ (~x0115699@nat/ti/x-ncvhrctktigwsbrt) has joined #beagle
  234. [06:59:02] <dm8tbr> ravi: look at the projects that focus on this
  235. [07:00:14] <dm8tbr> http://elinux.org/BeagleBoard#Android
  236. [07:02:07] * hrw|gone is now known as hrw
  237. [07:04:29] * Proxyles (~henrik@c-f893e255.56-4-64736c14.cust.bredbandsbolaget.se) has joined #beagle
  238. [07:05:32] * zodttd (~me@24.144.92.44) Quit (Ping timeout: 260 seconds)
  239. [07:06:08] <dm8tbr> av500: the HDMI people just beat Archos PR to confusing name specs - http://www.pcauthority.com.au/News/221343,hdmi-and-its-stupid-labelling-requirements.aspx
  240. [07:06:34] * soman (~somnath@118.102.130.6) has joined #beagle
  241. [07:07:22] * screwgoth1 (~raseel@122.170.53.43) has joined #beagle
  242. [07:07:22] * bkero is getting antsy about the xm.
  243. [07:07:49] * zodttd (~me@24.144.92.44) has joined #beagle
  244. [07:09:58] * porcoesphino (~porcoesph@165.228.198.130) Quit (Quit: Leaving)
  245. [07:10:51] * screwgoth (~raseel@122.170.53.43) Quit (Ping timeout: 264 seconds)
  246. [07:17:38] * markos_ (~markos@athedsl-423835.home.otenet.gr) has joined #beagle
  247. [07:20:15] * neo01124 (~neo@122.177.74.226) has joined #beagle
  248. [07:20:16] * kmargar (~markos@athedsl-422495.home.otenet.gr) Quit (Ping timeout: 240 seconds)
  249. [07:22:19] * screwgoth1 (~raseel@122.170.53.43) has left #beagle
  250. [07:24:05] * Gaston|Home (~Gaston@c-b12ee353.155-1-64736c11.cust.bredbandsbolaget.se) has joined #beagle
  251. [07:27:38] * eAndrius (~andrius@88-222-169-44.meganet.lt) has joined #beagle
  252. [07:28:25] * jpirko (~jirka@nat/redhat/x-awiqsdobmxhqzrgv) has joined #beagle
  253. [07:29:42] * janneg (~janne@chybek.jannau.net) has joined #beagle
  254. [07:33:45] * porcoesphino (~porcoesph@165.228.198.130) has joined #beagle
  255. [07:34:09] <mru> morning
  256. [07:34:44] <bkero> Good morning
  257. [07:34:56] <bkero> haxed defcon badge
  258. [07:35:06] <bkero> http://blueheaven.ws/2010/08/01/defcon-badge-hackery/
  259. [07:35:29] <ds2> morning
  260. [07:36:26] <av500> gm
  261. [07:37:48] <av500> bkero: http://www.t4f.org/en/projects/business-card
  262. [07:40:59] <bkero> av500: nice card
  263. [07:41:07] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  264. [07:41:57] * mchua is now known as mchua_afk
  265. [07:50:47] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #beagle
  266. [07:53:11] * woglinde (~henning@p5DDC2FA7.dip.t-dialin.net) has joined #beagle
  267. [07:53:24] <woglinde> hi
  268. [07:53:53] <av500> lo
  269. [07:56:39] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) has joined #beagle
  270. [07:58:48] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) Quit (Remote host closed the connection)
  271. [08:02:01] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) has joined #beagle
  272. [08:05:25] <koen> bkero: you know that the "corbin simpson" from that article is MostAwesomeDude in here?
  273. [08:05:36] <bkero> koen: I just had dinner with him.
  274. [08:05:40] <bkero> We work together :)
  275. [08:05:47] <woglinde> koen could you please ack http://patchwork.openembedded.org/patch/2478/ and http://patchwork.openembedded.org/patch/2479/
  276. [08:06:08] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) Quit (Remote host closed the connection)
  277. [08:06:37] <koen> woglinde: feel free to add my ack to those
  278. [08:08:08] <woglinde> thanks
  279. [08:08:50] <bkero> koen: me and MostAwesomeDude hack embedded hardware together :)
  280. [08:09:04] * koen watches 16 cores idle due to hitting legacy staging
  281. [08:09:06] <bkero> I'm looking forward to getting another beagle for big projects.
  282. [08:09:11] <koen> bkero: that's good to know :)
  283. [08:09:46] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) has joined #beagle
  284. [08:10:52] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) Quit (Remote host closed the connection)
  285. [08:15:04] * russ (foobar@ip70-176-251-1.ph.ph.cox.net) Quit (Ping timeout: 265 seconds)
  286. [08:17:00] * ssvb (~ssvb@93.125.104.26) Quit (Ping timeout: 265 seconds)
  287. [08:36:04] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  288. [08:50:25] * orjanf (~onfg@h51baff8c.k3918.sta.perspektivbredband.net) has left #beagle
  289. [08:56:56] * kaushal (~kaushal@125.22.61.162) has joined #beagle
  290. [08:57:00] <kaushal> hi
  291. [08:58:30] <kaushal> Index Information is also 0
  292. [08:58:54] <kaushal> I mean s/also/always/g zero
  293. [08:59:02] <kaushal> I am running it on Ubuntu
  294. [08:59:04] <kaushal> 10.04
  295. [08:59:08] <kaushal> Any clue ?
  296. [09:01:05] <koen> see topic
  297. [09:01:31] * XorA|gone is now known as XorA
  298. [09:01:48] <kaushal> koen: sure
  299. [09:01:53] <woglinde> whats Index Information?
  300. [09:02:00] <kaushal> so its irc.gimp.org and #dashboard
  301. [09:02:06] * dm8tbr puts 23?? on that search tool
  302. [09:02:44] <woglinde> ah
  303. [09:02:50] <woglinde> that stupid mono stuff
  304. [09:03:39] * mru suspects that people never read the topic
  305. [09:04:02] <woglinde> mru buts fun pointing them afterwards
  306. [09:04:05] <dm8tbr> I think that would be koen rule 1 or 2
  307. [09:05:35] <koen> my rules are like the way I work
  308. [09:05:48] <koen> I skip step and and 2 because I'm impatient
  309. [09:06:00] <koen> hence #3 is "try and find out"
  310. [09:06:28] * dm8tbr was referring to < koen> 1) people don't ever read instructions
  311. [09:06:49] <koen> ah, that one
  312. [09:07:33] <dm8tbr> we've had lots of people where rule 3 applied WRT to their 3G-SFR unit hacking
  313. [09:12:18] * screwgoth (~raseel@122.170.53.43) has joined #beagle
  314. [09:14:57] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Quit: leaving)
  315. [09:17:21] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #beagle
  316. [09:24:26] * woglinde_ (~henning@p5DDC161B.dip.t-dialin.net) has joined #beagle
  317. [09:26:15] * ravi (ca36af83@gateway/web/freenode/ip.202.54.175.131) Quit (Quit: Page closed)
  318. [09:26:39] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Remote host closed the connection)
  319. [09:27:05] * woglinde (~henning@p5DDC2FA7.dip.t-dialin.net) Quit (Ping timeout: 265 seconds)
  320. [09:27:25] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  321. [09:31:57] * woglinde_ is now known as woglinde
  322. [09:38:36] * Gaston|Home (~Gaston@c-b12ee353.155-1-64736c11.cust.bredbandsbolaget.se) Quit (Ping timeout: 260 seconds)
  323. [09:38:55] * Entasis (~Jarred@ppp118-210-10-169.lns20.adl2.internode.on.net) has joined #beagle
  324. [09:40:23] * mchua_afk is now known as mchua
  325. [09:48:55] <hgs> hi, could any point me to reference/examples for configuring the omap35x board (dsp-link/codecengines..etc) for 512mb memory map??
  326. [09:49:53] <woglinde> hgs google has nothing?
  327. [09:50:33] * amitk is now known as amitk-afk
  328. [09:52:15] * Kmus (~askme@217.33.179.86) has joined #beagle
  329. [09:52:18] <Kmus> Morning all
  330. [09:53:05] <av500> hgs: http://processors.wiki.ti.com/index.php/Changing_DSPLink_Memory_Map
  331. [09:53:20] * ssvb (~ssvb@93.125.104.26) has joined #beagle
  332. [09:55:31] <woglinde> hm ieehks
  333. [09:57:01] <av500> hgs: http://processors.wiki.ti.com/index.php/Changing_the_DVEVM_memory_map
  334. [09:57:47] <hgs> av500: exactly thanks was actually looking at it by following your previous link on **/Changing_DSPLink_Memory_Map
  335. [10:00:35] * koen just uses a memory hole to avoid rebuilding the dsp codecs
  336. [10:01:34] <av500> s/codecs/servers/
  337. [10:04:43] * drinkcat (~nicolas@119.56.3.26) has joined #beagle
  338. [10:05:48] <koen> right
  339. [10:06:07] <av500> lets be professionals!
  340. [10:10:08] <hgs> always wondered what was the need for memory hole instead of memory alloc at the end of the address space? but now found the answer
  341. [10:10:44] <mru> poor design is the answer
  342. [10:10:49] <mru> or possibly no design
  343. [10:12:02] * grummel1 (~thmo2826@213.95.68.61) has joined #beagle
  344. [10:12:24] * grummel1 (~thmo2826@213.95.68.61) has left #beagle
  345. [10:12:40] * nerxgas (~fatboy@adsl-69-227-215-190.dsl.scrm01.pacbell.net) Quit (Ping timeout: 260 seconds)
  346. [10:13:01] <hgs> mru: poor design from where?? build system (dsplink)??
  347. [10:13:21] <mru> from whatever has hardcoded physical addresses
  348. [10:13:31] <mru> how hard can it be to make it a variable?
  349. [10:14:07] * neo01124 (~neo@122.177.74.226) Quit (Ping timeout: 248 seconds)
  350. [10:14:12] * rsv (7aa60de8@gateway/web/freenode/ip.122.166.13.232) has joined #beagle
  351. [10:14:47] * neo01124 (~neo@122.177.2.193) has joined #beagle
  352. [10:17:27] * neo01124 (~neo@122.177.2.193) Quit (Read error: Connection reset by peer)
  353. [10:20:21] * neo01124 (~neo@122.177.78.65) has joined #beagle
  354. [10:22:41] <woglinde> ddralg_heap
  355. [10:23:05] * neo01123 (~neo@122.163.218.224) has joined #beagle
  356. [10:23:30] <av500> woglinde: ?
  357. [10:24:03] <woglinde> Optional: Using CMEM to dynamically size DDRALGHEAP
  358. [10:24:38] <woglinde> just reading the wiki site
  359. [10:24:40] * neo01124 (~neo@122.177.78.65) Quit (Ping timeout: 240 seconds)
  360. [10:24:51] <woglinde> to be professional or something
  361. [10:25:22] <av500> woglinde: ah right
  362. [10:25:32] <av500> never got around to implement that one here..
  363. [10:26:07] <av500> was no use anyway, as the worst case on DDRALGHEAP as also worst case on CMEM...
  364. [10:26:58] <_koen_> woglinde: do you have your patches to CE and xdctools somewhere online?
  365. [10:27:01] * scrp3l (~scrp3l@201.250.178.201) Quit (Ping timeout: 276 seconds)
  366. [10:27:10] <woglinde> koen sorry not yet
  367. [10:27:51] <woglinde> I thought anyway that you update the stuff last week
  368. [10:28:11] <woglinde> +wanted to
  369. [10:30:12] <_koen_> I still want to
  370. [10:30:26] <_koen_> but other issues popped up :(
  371. [10:31:14] <woglinde> aaah its for meego
  372. [10:31:30] * woglinde never wanted to work on meego *g*
  373. [10:32:12] <woglinde> maybee I find this evening a little bit time for it
  374. [10:32:12] <_koen_> not for meego
  375. [10:32:22] <_koen_> I'm just dropping names to get it escalated
  376. [10:32:37] <woglinde> *g*
  377. [10:36:41] * neo01123 (~neo@122.163.218.224) Quit (Ping timeout: 265 seconds)
  378. [10:37:26] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Read error: Connection reset by peer)
  379. [10:38:27] <_koen_> I just want the angstrom-next toolchain to build gstreamer-ti
  380. [10:39:10] <woglinde> yes
  381. [10:39:15] <woglinde> thats clear
  382. [10:39:23] <woglinde> hm after my patches
  383. [10:39:28] <woglinde> you can raise the binutils
  384. [10:40:20] <woglinde> there will be one patch which is dps/machine depend
  385. [10:40:27] <woglinde> args dsp
  386. [10:40:58] <woglinde> hm but only when you rebuild codec-enginge libs
  387. [10:41:25] <woglinde> and I dont can test it on hw
  388. [10:46:15] * screwgoth (~raseel@122.170.53.43) has left #beagle
  389. [10:51:44] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 245 seconds)
  390. [10:54:52] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  391. [10:55:04] * topfs2 (~topfs2@xbmc/staff/topfs2) has left #beagle
  392. [10:55:59] * amitk-afk is now known as amitk
  393. [11:00:06] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) has joined #beagle
  394. [11:02:02] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) has left #beagle
  395. [11:06:15] * _koen_ gets another mail having "Re: foo-ml Digest, Vol xx, Issue y" as subject
  396. [11:06:34] <_koen_> so even simple things like digest mails are too hard for people
  397. [11:07:16] * drinkcat (~nicolas@119.56.3.26) Quit (Ping timeout: 240 seconds)
  398. [11:09:14] * drinkcat (~nicolas@119.56.3.26) has joined #beagle
  399. [11:11:28] <av500> _koen_: I would hide digest mails under "advanced, professional settings"
  400. [11:13:18] * raster (raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  401. [11:13:20] <woglinde> readers digest
  402. [11:13:22] <woglinde> haha
  403. [11:14:06] <harbaum> Hi! I am porting meego to the beagleboard: http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch
  404. [11:14:32] <_koen_> it wouldn't annoy me if it wasn't for the fact that every digest mail tells people to change the subject line to remove the digest
  405. [11:14:38] <harbaum> And i got a bb-xm which is only partly supported by the ubuntu kernel i am using
  406. [11:14:46] <_koen_> porting or compiling?
  407. [11:14:48] <woglinde> use the oe kernel
  408. [11:14:54] <_koen_> use the angstrom kernel
  409. [11:15:07] <woglinde> *g*
  410. [11:15:24] <woglinde> use the psp kernel in oe repo
  411. [11:15:54] <av500> harbaum: please send us your XM so that we can help you best on it
  412. [11:16:12] <woglinde> thats professional
  413. [11:16:54] <harbaum> ??? I didn't even ask a question yet, still you already feel offended???
  414. [11:17:03] <av500> not at all :)
  415. [11:17:10] <woglinde> o.O?
  416. [11:17:12] <woglinde> offended?
  417. [11:17:27] <woglinde> I am only sharing the pain with you
  418. [11:17:30] <woglinde> working with rpm
  419. [11:17:57] * mchua is now known as mchua_afk
  420. [11:18:06] <woglinde> especially for kernel-src.rpm
  421. [11:18:14] <harbaum> The quesion is whether there are patches for 2.6.34+
  422. [11:18:28] <woglinde> dont know
  423. [11:18:33] <woglinde> koen may know
  424. [11:18:36] <harbaum> angstrom is using 2.6.32 something, correct?
  425. [11:18:39] <woglinde> if there is psp-2.6.34
  426. [11:18:46] <woglinde> yes
  427. [11:19:44] <woglinde> btw. 2.6.35 is out
  428. [11:20:13] <_koen_> .32, yes
  429. [11:21:01] <harbaum> By psp you mean this: http://arago-project.org/git/people/?p=sriram/ti-psp-omap.git;a=summary
  430. [11:22:20] <woglinde> yes
  431. [11:22:33] <harbaum> Ok, thanks, i will look into this ... in the long run, ubuntu will also want to support the xm
  432. [11:22:43] <woglinde> http://cgit.openembedded.org/cgit.cgi/openembedded/tree/recipes/linux/linux-omap-psp_2.6.32.bb
  433. [11:22:58] <_koen_> you need a lot more than the psp git tree to get the xm working :_)
  434. [11:23:14] <woglinde> *g*
  435. [11:23:27] <harbaum> Actually the xm is already working with the ubuntu kernel
  436. [11:23:39] <harbaum> But lots of thingsa are missing
  437. [11:24:02] * woglinde dont understand the meego/ubuntu/linaro kernel mix
  438. [11:24:31] <woglinde> but maybee thats professional
  439. [11:25:04] <harbaum> Kernel mix? From me as a non-angstrom user is usually feels like "get the vanilla sources plud the right patches and there you are"
  440. [11:25:30] <harbaum> Why should it matter whether i run meego, angstrom, ubuntu, whatever?
  441. [11:26:19] <av500> it should not
  442. [11:26:41] <_koen_> how many sgx drivers does the meego kernel now have? 6?
  443. [11:26:44] <av500> i guess it all hinges on "the right patches"
  444. [11:27:02] <woglinde> 3
  445. [11:27:13] <_koen_> all the patches are on the web, publically available
  446. [11:27:29] <_koen_> in the beagleboard git kernel, the angstrom kernel git tree, OE, etc
  447. [11:27:46] <_koen_> if people/companies are too lazy to use those, so be it
  448. [11:27:59] <_koen_> just don't come crying here because it doens't work
  449. [11:29:50] <woglinde> koen its 2.6.32 and too old
  450. [11:29:56] <woglinde> for meego and ubuntu
  451. [11:30:07] <woglinde> for other vendors its to young
  452. [11:30:09] <woglinde> *g*
  453. [11:30:26] <av500> .32 is too old? why?
  454. [11:30:39] <woglinde> because they have .34
  455. [11:31:02] <_koen_> it's only board file patches
  456. [11:31:19] <_koen_> for xm support, that is
  457. [11:31:32] <_koen_> the camera stuff is based on a backported driver from .34
  458. [11:31:44] <woglinde> koen is there Mistral, TMDSEVM3530 support in oe/angstroem?
  459. [11:31:58] <_koen_> MACHINE=omap3evm
  460. [11:32:07] <_koen_> has been there for years
  461. [11:32:17] <woglinde> okay
  462. [11:32:27] <_koen_> there's one next to me right now :)
  463. [11:32:35] <woglinde> didnt know the it has mistral as name too
  464. [11:32:39] <_koen_> waiting for the narcissus rootfs to finish downloading
  465. [11:33:16] * av500 wonders what to use 3 omap3 evms for...
  466. [11:33:46] <woglinde> rendering farm
  467. [11:34:13] <av500> hmm, I could rent them out as ubuntu build servers
  468. [11:34:15] <woglinde> koen is narcissus down?
  469. [11:34:19] <woglinde> cant connect
  470. [11:34:28] <_koen_> woglinde: no, linuxtogo is having disk problems *again*
  471. [11:34:29] <woglinde> or hangs
  472. [11:34:31] <_koen_> so it's really slow
  473. [11:34:36] <woglinde> *sigh*
  474. [11:34:54] <woglinde> seems there so many disks which dont likes us
  475. [11:35:40] <harbaum> wow ... the oe kernels have a bunch of patches ...
  476. [11:35:44] <_koen_> I need to hunt down what happened to the $5k grant for angstrom servers
  477. [11:35:56] * naeg (~naeg@194.208.239.170) has joined #beagle
  478. [11:35:58] <woglinde> uh who granted?
  479. [11:36:01] <_koen_> TI
  480. [11:36:06] <woglinde> cool
  481. [11:36:23] <_koen_> I need to poke the active members of the eV for that
  482. [11:36:34] <_koen_> the german ones are useless or dead
  483. [11:36:34] <woglinde> florian
  484. [11:36:43] <_koen_> either way, they don't respond to anything
  485. [11:36:48] <woglinde> hm
  486. [11:38:50] * naeg (~naeg@194.208.239.170) Quit (*.net *.split)
  487. [11:38:50] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) Quit (*.net *.split)
  488. [11:38:51] * mrc3_ (~mrc3@nat/ti/x-hzpjiluhjnvxtega) Quit (*.net *.split)
  489. [11:38:51] * TheUni (~quassel@xbmc/staff/theuni) Quit (*.net *.split)
  490. [11:38:52] * shoragan (~shoragan@sicherheitsschwankung.de) Quit (*.net *.split)
  491. [11:38:52] * kerute (~kerute@kerunix.com) Quit (*.net *.split)
  492. [11:39:50] * shoragan (~shoragan@sicherheitsschwankung.de) has joined #beagle
  493. [11:39:58] * kerute (~kerute@kerunix.com) has joined #beagle
  494. [11:40:47] * TheUni (~quassel@xbmc/staff/theuni) has joined #beagle
  495. [11:41:43] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  496. [11:43:33] * mrc3_ (~mrc3@nat/ti/x-vzwqpkbflxezgsrh) has joined #beagle
  497. [11:45:04] * hgs (~hgs@82.202-63-132.static.qala.com.sg) Quit (Ping timeout: 260 seconds)
  498. [11:45:06] * guesto (3a6b958e@gateway/web/freenode/ip.58.107.149.142) has joined #beagle
  499. [11:45:21] * hgs (~hgs@82.202-63-132.static.qala.com.sg) has joined #beagle
  500. [11:48:12] * rsv (7aa60de8@gateway/web/freenode/ip.122.166.13.232) Quit (Ping timeout: 252 seconds)
  501. [11:53:19] * naeg (~naeg@194.208.239.170) has joined #beagle
  502. [11:58:49] <hgs> hi, where can i find the source contents on which the compilation happen in oe/angstrom build , for ex i cannot find the source for gstreamer-ti inside "oe/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/gstreamer-ti-svnr612-r59+r84/". though i find the sysrootfs has binaries created
  503. [11:59:41] <av500> oe tends to delete stuff after build
  504. [12:01:03] <woglinde> inherits "rm_work"
  505. [12:01:06] <woglinde> does it
  506. [12:01:15] * _koen_ (~x0115699@nat/ti/x-ncvhrctktigwsbrt) Quit (Ping timeout: 264 seconds)
  507. [12:01:29] <woglinde> hgs do bitbake -c clean gstreamer-ti
  508. [12:01:29] * rcranetx (~rcranetx@nat/ti/x-jbhswpheimshuoib) has joined #beagle
  509. [12:01:34] <hgs> INHERIT += "rm_work" local conf file has it
  510. [12:01:38] <woglinde> bitbake -c build gstreamer-ti
  511. [12:01:46] <woglinde> and then you have all
  512. [12:01:52] <woglinde> not deleted
  513. [12:01:52] * NishanthMenon (~nmenon@nat/ti/x-onqxzghszsgpdxfm) has joined #beagle
  514. [12:02:22] * gustavoz (~gustavoz@host5.201-253-237.telecom.net.ar) has joined #beagle
  515. [12:02:25] <hgs> woglinde: thanks tried bitbake do_compiled gstreamer-ti but it failed may be i should have clean it before
  516. [12:02:38] <woglinde> o.O?
  517. [12:02:57] <woglinde> it will do nothing because the stamps are already there
  518. [12:02:58] <hgs> may be do_stag*** something before
  519. [12:03:10] <woglinde> -c clean removes them
  520. [12:03:17] <woglinde> or -f ignores them
  521. [12:05:53] <hgs> woglinde: thanks
  522. [12:14:33] * Nitin__ (7aa6082d@gateway/web/freenode/ip.122.166.8.45) has joined #beagle
  523. [12:15:09] <Nitin__> is it possible to connect /dev/video1 to overlay1 and enable overlay1?
  524. [12:15:19] <av500> yes
  525. [12:15:39] <Nitin__> how to see which overlays /dev/video1 is connected?
  526. [12:16:07] <Nitin__> I could easily see while using frame buffers, i.e /dev/fb1 and /dev/fb2
  527. [12:16:48] <av500> i think it is dynamic
  528. [12:17:08] <av500> /dev/videoX could be anything, a camera or an outout device
  529. [12:17:25] * _koen_ (~x0115699@nat/ti/x-kwficvoaoztxomgg) has joined #beagle
  530. [12:17:39] <mru> opannotate is funny: vshll.s16 d18, <illegal reg q4.5>, #11
  531. [12:17:51] <Nitin__> for me it's output device
  532. [12:18:35] <Nitin__> My understanding is that video1 should be connected to overlay1 and overlay1 should be enabled
  533. [12:18:47] <Nitin__> then only I can see something on output
  534. [12:18:50] <av500> Nitin__: http://processors.wiki.ti.com/index.php/UserGuideDisplayDrivers_PSP_03.00.00.04
  535. [12:20:43] <av500> /sys/devices/virtual/video4linux/video1/
  536. [12:25:17] <Nitin__> What is equivalent to /sys/class/graphics/fb0/overlays for /dev/video1
  537. [12:25:46] * jconnolly is now known as jc|mobile
  538. [12:26:37] <av500> if all you have on v4l2 is omap_vout, then video0 is overlay0 and video1 is overlay1
  539. [12:26:47] * calculus (~calculus@gentoo/user/calculus) has joined #beagle
  540. [12:27:06] * pcacjr (~pcacjr@unaffiliated/pcacjr) has joined #beagle
  541. [12:27:08] <av500> err, 1 + 2
  542. [12:27:13] <av500> overlay0 is gfx
  543. [12:28:27] <Nitin__> You mean implicitly video1 is connected to overlay1
  544. [12:28:36] <Nitin__> and video 2 is connected to iverlay2
  545. [12:28:40] <Nitin__> overlay2
  546. [12:28:55] <Nitin__> I am new to v4l2, so these questions
  547. [12:29:04] <av500> less linux/drivers/media/video/omap/omap_vout.c
  548. [12:29:27] <Nitin__> Fine I will see that source
  549. [12:29:30] <av500> as said, the mapping between videoX and overlayX is dynamic
  550. [12:29:44] <av500> it depends on all the V4L2 drivers you have
  551. [12:29:47] <Nitin__> What do you mean by dynamic
  552. [12:29:58] <av500> [14:17] <av500> /dev/videoX could be anything, a camera or an outout device
  553. [12:30:11] <Nitin__> I C
  554. [12:30:35] <Nitin__> I am not able to enable overlay1 through sysfs interface
  555. [12:31:13] <Nitin__> Is it that I need to set width and height before enabling overlay1
  556. [12:31:28] <av500> why else would you enable it?
  557. [12:31:51] <Nitin__> Thanks for your inputs
  558. [12:32:18] <Nitin__> Also I am trying to enable global alpha from App code, it returns me -EINVAL
  559. [12:32:32] <Nitin__> thats the main problem
  560. [12:32:35] <av500> how?
  561. [12:32:59] <Nitin__> from liboverlay from Android
  562. [12:33:50] <Nitin__> First issuing G_FBUF
  563. [12:34:13] <Nitin__> Then saying fbuf.flags |= V4L2_FBUF_FLAG_GLOBAL_ALPHA;
  564. [12:34:26] <Nitin__> and then issuing S_FBUF
  565. [12:34:58] <av500> no
  566. [12:35:01] * GrouchoMarx (~gmarx@rrcs-67-53-159-201.west.biz.rr.com) has joined #beagle
  567. [12:35:06] * kevinsc (~a0214685@nat/ti/x-yfzqtblbihjalgwq) has joined #beagle
  568. [12:36:04] <Nitin__> Call to S_FBUF is failing with -EINVAL
  569. [12:36:05] <av500> read the doc I linked
  570. [12:36:16] <Nitin__> I will do that
  571. [12:37:24] <Nitin__> Also whats equivalent of fbset in v4l2
  572. [12:38:18] <av500> what v4l2.c does in liboverlay
  573. [12:40:26] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) Quit (Ping timeout: 265 seconds)
  574. [12:41:17] * new2bb (a4a4fa0a@gateway/web/freenode/ip.164.164.250.10) Quit (Quit: Page closed)
  575. [12:41:52] <Nitin__> You mean you are asking that?
  576. [12:42:53] <Nitin__> Or you are saying whatever v4l2_utils.c does, thats the only way
  577. [12:45:12] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  578. [12:50:31] <koen> I think I'm going to port ffmpeg to beagle C4
  579. [12:50:57] <DaveDavenport> ?
  580. [12:51:04] <av500> koen: I can help you
  581. [12:51:17] <DaveDavenport> what is so different that you have to port it specific to C4?
  582. [12:51:31] * rodrigo_golive (~rodrigo_g@nat/mandriva/x-rbyfjfzziypftiej) has joined #beagle
  583. [12:51:50] <koen> seems my sarcasm didn't translate to IRC
  584. [12:52:00] <koen> DaveDavenport: all those android using are "porting" android
  585. [12:52:11] <koen> when they actuall mean "download, unpack to SD, boot"
  586. [12:52:32] <DaveDavenport> aah
  587. [12:52:45] <DaveDavenport> I was confused
  588. [12:52:52] <DaveDavenport> you forgot that <sarcasm> tags
  589. [12:53:40] <av500> DaveDavenport: not really
  590. [12:54:28] <woglinde> I wan port DSP to android
  591. [12:54:36] <woglinde> *g*
  592. [12:54:51] <av500> woglinde: now add: "please send my the codes"
  593. [12:55:26] * neo01124 (~neo@122.177.74.101) has joined #beagle
  594. [12:55:27] * sol-invictus (~chatzilla@pidellelle.ifit.uni-klu.ac.at) Quit (Remote host closed the connection)
  595. [12:57:26] <koen> or "please send me all the exact steps"
  596. [12:58:44] <DaveDavenport> coffee!
  597. [12:59:44] <dm8tbr> mhhhm, caffeinated beverage...
  598. [12:59:57] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) has joined #beagle
  599. [13:01:51] * neo01123 (~neo@122.163.103.84) has joined #beagle
  600. [13:02:35] * brijesh (~brijesh@nat/ti/x-bmxpynvmgcqnaoqq) has joined #beagle
  601. [13:04:07] * neo01124 (~neo@122.177.74.101) Quit (Ping timeout: 276 seconds)
  602. [13:08:25] * mobidev|aw (~mobidev@94.127.205.30) has joined #beagle
  603. [13:08:49] * soman (~somnath@118.102.130.6) Quit (Remote host closed the connection)
  604. [13:12:31] * Redb3ard (~SF0010MAC@lbb-dslst.69616810.amaonline.com) has joined #beagle
  605. [13:13:09] * mobidev|aw (~mobidev@94.127.205.30) Quit (Client Quit)
  606. [13:13:15] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) Quit (Remote host closed the connection)
  607. [13:13:52] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) has joined #beagle
  608. [13:16:24] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) Quit (Remote host closed the connection)
  609. [13:17:01] * neo01123 (~neo@122.163.103.84) Quit (Ping timeout: 276 seconds)
  610. [13:18:27] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) has joined #beagle
  611. [13:20:27] * whittenburg (~whittenbu@ip72-213-154-11.ok.ok.cox.net) Quit (Ping timeout: 264 seconds)
  612. [13:22:41] * foobaz (~Guest238@141.218.148.34) Quit (Quit: PJIRC forever!)
  613. [13:23:10] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 252 seconds)
  614. [13:25:02] * pepere (52faa0a4@gateway/web/freenode/ip.82.250.160.164) has joined #beagle
  615. [13:25:14] <pepere> Hi all
  616. [13:25:58] <Kmus> Hi pepere
  617. [13:26:27] <pepere> I've got an hawkbaord and I would like to setup a project on ccs4 to start playing with DSP side
  618. [13:26:50] <pepere> people from hawk group tell to come here becasue omap3530 is almost same business :)
  619. [13:27:16] <pepere> so i'm looking for example on haw to setup ccs4 to satrt playing with dsp on ti arm+dsp proc
  620. [13:28:09] <pepere> so kind of "hello word" walkthrough :)
  621. [13:28:35] <pepere> I've got everything running linux+usb xds100v2 and css4
  622. [13:33:24] <woglinde> hm what was css4
  623. [13:33:51] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  624. [13:34:09] <_koen_> a misspelling of ccs v4
  625. [13:34:36] <woglinde> ah the ti dsp compiler
  626. [13:34:51] <av500> no
  627. [13:34:55] <av500> the IDE
  628. [13:34:55] <kai> hm, I've only used that for MSP430 programming so far :)
  629. [13:35:00] <kai> yeah
  630. [13:35:03] <mru> the thing you don't need
  631. [13:35:20] <woglinde> aeh o.O?
  632. [13:35:27] <kai> mru: it's quite nifty for the msp430 :)
  633. [13:35:27] <pepere> ha ok :)
  634. [13:35:33] <av500> ccs can be somewhat useful for DSP stuf
  635. [13:35:40] <woglinde> I thought msp430 was gcc-msp430
  636. [13:35:40] <av500> +f
  637. [13:35:48] <pepere> so you mean I use a .txt file compile it and run it?
  638. [13:36:01] <kai> woglinde: with ccs you can debug on-board, though
  639. [13:36:08] <pepere> I was thniking it was usefull for debugging
  640. [13:36:10] <pepere> ok
  641. [13:36:18] <kai> I didn't see an option for that in gcc-msp430
  642. [13:36:33] <woglinde> kai gdb should work
  643. [13:36:55] <woglinde> so ccs was the one with eclipse?
  644. [13:37:01] <kai> yeah
  645. [13:37:09] <pepere> yes
  646. [13:37:19] <woglinde> okay
  647. [13:37:22] <woglinde> long time
  648. [13:37:28] <woglinde> sinced I used it
  649. [13:37:39] * robclark (~robclark@nat/ti/x-smefclhcwsitcexx) has joined #beagle
  650. [13:37:58] <pepere> I don't know I was thinking I coud compile something with it and upload it to the dsp and do step by step debugging to see how the whole thing was working
  651. [13:38:01] * orjanf (~onfg@h51baff8c.k3918.sta.perspektivbredband.net) has joined #beagle
  652. [13:38:32] <pepere> and later use IPC mechanism to communicate with the linux on the ARM side
  653. [13:38:41] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  654. [13:38:56] <woglinde> aeh
  655. [13:39:06] <pepere> so i was trying to setup a dev env for the omap l138 on ccs v4
  656. [13:39:41] <woglinde> maybee you want fight you through the ti-codec-engine stuff
  657. [13:40:06] <av500> woglinde: dont fight it, go with the flow!
  658. [13:40:08] <woglinde> but they dont use ccs as far as I could saw it
  659. [13:40:24] <pepere> from what I read on the wiki, the codec engine stuff is ok for doing sound processing.
  660. [13:40:38] <av500> yes
  661. [13:40:46] <woglinde> and vidoe and picture
  662. [13:40:54] <pepere> In my case I'm doing more low level, mow latency things, so it is not that needed (codec engine)
  663. [13:41:02] <pepere> mow=low
  664. [13:41:06] <av500> and speech, people always forget speech
  665. [13:41:11] <woglinde> av500 right
  666. [13:41:16] * Crofton (~balister@pool-96-240-180-89.ronkva.east.verizon.net) Quit (Quit: Leaving)
  667. [13:41:19] <_koen_> CE is more a set of rules than a real engine
  668. [13:41:41] <av500> it also abstracts the dsplink transport away
  669. [13:41:49] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) Quit (Ping timeout: 265 seconds)
  670. [13:42:08] <pepere> In my use case I need to setup DMA to get data from externel source, process it with custom DSP algorithm and send result back to arm if needed
  671. [13:42:20] <pepere> so most of the work is on DMA stuff
  672. [13:42:22] <av500> what source?
  673. [13:42:39] <pepere> upp port
  674. [13:42:52] <av500> upp?
  675. [13:43:03] <av500> downn?
  676. [13:43:03] <pepere> (omapl138 specific, but there is a dsp/bios driver for that)
  677. [13:43:10] <av500> ok
  678. [13:43:12] <pepere> universal parallel port
  679. [13:43:28] <pepere> some high speed synchroneous 16bit port
  680. [13:43:34] <av500> k
  681. [13:44:01] <pepere> how do you design DSP algorithm usually on ti dsp?
  682. [13:44:05] <pepere> you don't use ccs v4?
  683. [13:44:19] <av500> few people here design dsp stuff at all
  684. [13:44:26] <pepere> arf :)
  685. [13:44:39] <pepere> that'zs bad for me ;)
  686. [13:44:44] <av500> most port stuff
  687. [13:44:57] <kai> we do?
  688. [13:44:58] <pepere> hum ok and after port never dsp :D?
  689. [13:45:19] <av500> kai: statistically speaking yes :)
  690. [13:45:51] <kai> pepere: I use my beagles as file servers and domain controllers, I don't think the dsp chip will speed up any of that significantly
  691. [13:46:10] <pepere> :D sure... I'm looking for a more industrial usage :)
  692. [13:46:35] <av500> kai: speak to my boss about that!
  693. [13:46:46] * neo01124 (~neo@122.163.103.84) has joined #beagle
  694. [13:48:10] * peksha (~peksha@11.54.broadband2.iol.cz) has joined #beagle
  695. [13:48:21] * prpplague (~Dave@ppp-70-242-115-215.dsl.rcsntx.swbell.net) Quit (Quit: Leaving)
  696. [13:54:24] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) has joined #beagle
  697. [13:56:18] * alancam (~a-campbel@nat/ti/x-youodrmwexmzefhm) has joined #beagle
  698. [13:57:09] * jc|mobile is now known as jconnolly
  699. [13:57:38] * Nitin__ (7aa6082d@gateway/web/freenode/ip.122.166.8.45) Quit (Ping timeout: 252 seconds)
  700. [13:58:57] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  701. [13:59:25] * whittenburg (~whittenbu@mail.tacticalelectronics.com) has joined #beagle
  702. [13:59:41] * topfs2 (~topfs2@xbmc/staff/topfs2) has left #beagle
  703. [14:00:29] * katie (~katierh@nat/ti/x-qejsofoeblsgirsq) has joined #beagle
  704. [14:00:45] * nitesh (~nitesh@122.169.50.238) Quit (Quit: Leaving)
  705. [14:01:59] * Crofton (~balister@pool-96-240-180-89.ronkva.east.verizon.net) has joined #beagle
  706. [14:02:04] * BThompson (~a0193480@nat/ti/x-ppqabxzrgutnfqmx) has joined #beagle
  707. [14:06:12] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) has joined #beagle
  708. [14:09:55] * Zoxc (~zoxc@ti0128a340-dhcp0032.bb.online.no) has joined #beagle
  709. [14:10:26] * niclas_ (~niclas@nat/ti/x-avzmdkzstzufsmuc) has joined #beagle
  710. [14:11:50] <sjhill> is anyone on here working with/for Linaro?
  711. [14:12:38] <woglinde> in gerneral or for the beagle?
  712. [14:14:37] <sjhill> beagle and android
  713. [14:15:08] <av500> linaro does android?
  714. [14:15:25] * woglinde wonders about the quesitons from sjhill
  715. [14:15:39] <woglinde> linaro does android with dsp stuff
  716. [14:15:42] <woglinde> *g*
  717. [14:18:52] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  718. [14:18:53] <sjhill> there are a number of OMAP trees hosted by TI, omapzoom
  719. [14:18:58] <sjhill> then there is the rowboat stuff
  720. [14:19:07] <sjhill> then there is git.kernel.org for vanilla
  721. [14:19:22] <sjhill> and i'm trying to see what other omap trees there are
  722. [14:19:41] <av500> there is a whole forest
  723. [14:20:34] <sjhill> right, that's what i'm trying to get a feel for
  724. [14:22:24] <woglinde> sjhill thats way it is
  725. [14:22:35] <woglinde> steal it and make it your work
  726. [14:23:51] * alancam_ (~a-campbel@nat/ti/x-opgffppshdtennsi) has joined #beagle
  727. [14:23:51] * alancam (~a-campbel@nat/ti/x-youodrmwexmzefhm) Quit (Remote host closed the connection)
  728. [14:24:32] <sjhill> are there any other trees that the ones i mentioned above?
  729. [14:24:39] * ant_work (~chatzilla@host214-85-static.34-85-b.business.telecomitalia.it) has joined #beagle
  730. [14:26:56] * tconant (~tconant@68.111.35.226) has joined #beagle
  731. [14:28:01] <woglinde> sjhill wasnt there a general linux-omap tree too?
  732. [14:28:13] <_koen_> is lycos down?
  733. [14:28:48] <woglinde> http://www.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
  734. [14:29:04] <woglinde> who needs lycos?
  735. [14:29:16] <_koen_> people who don't want to use google
  736. [14:29:22] <_koen_> and we have a lot of those it seems
  737. [14:29:29] <av500> google keeps all your datas!
  738. [14:29:35] * naeg (~naeg@194.208.239.170) Quit (Quit: WeeChat 0.3.2)
  739. [14:29:45] <woglinde> lycos.de and lycos.com works here
  740. [14:32:16] * guesto (3a6b958e@gateway/web/freenode/ip.58.107.149.142) Quit (Quit: Page closed)
  741. [14:32:40] * RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) Quit (Quit: S.N.A.F.U.)
  742. [14:33:13] <woglinde> hm altavista
  743. [14:33:26] * kaushal (~kaushal@125.22.61.162) Quit (Quit: leaving)
  744. [14:34:00] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Connection reset by peer)
  745. [14:34:01] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  746. [14:34:54] * ogra_ is now known as ogra
  747. [14:35:04] * ogra (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Changing host)
  748. [14:35:04] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  749. [14:36:40] * jkridner (~jason@pdpc/supporter/active/jkridner) Quit (Read error: Connection reset by peer)
  750. [14:37:06] * jkridner (~jason@c-98-250-141-144.hsd1.mi.comcast.net) has joined #beagle
  751. [14:37:06] * jkridner (~jason@c-98-250-141-144.hsd1.mi.comcast.net) Quit (Changing host)
  752. [14:37:06] * jkridner (~jason@pdpc/supporter/active/jkridner) has joined #beagle
  753. [14:40:58] * harbaum (~quassel@et-1-20.gw-nat.bs.ka.oneandone.net) Quit (Remote host closed the connection)
  754. [14:44:48] * prpplague (~danders@nat/ti/x-ynoohboueynqjyai) has joined #beagle
  755. [14:45:06] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
  756. [14:47:55] * jconnoll1 (~jconnolly@firebug.buglabs.net) has joined #beagle
  757. [14:48:09] * _koen_ (~x0115699@nat/ti/x-kwficvoaoztxomgg) Quit (Ping timeout: 240 seconds)
  758. [14:49:58] * jconnolly (~jconnolly@acct-342343.voice.dsl.net) Quit (Ping timeout: 276 seconds)
  759. [14:51:51] * mchua_afk is now known as mchua
  760. [14:54:28] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
  761. [14:55:03] * robclark (~robclark@nat/ti/x-smefclhcwsitcexx) Quit (Remote host closed the connection)
  762. [14:57:20] * robclark (~robclark@nat/ti/x-azmsceszeaogoeaa) has joined #beagle
  763. [14:58:21] * avalerion (~avalerion@pool-71-185-163-17.phlapa.fios.verizon.net) has joined #beagle
  764. [14:59:23] <avalerion> What does it mean when I'm booting Angstrom - "/bin/sh: can't access tty; job control turned off"?
  765. [14:59:34] <mru> your /dev is bust
  766. [14:59:37] <mru> or empty
  767. [14:59:56] <avalerion> i formatted the SD card, and started from scratch...
  768. [15:00:55] <avalerion> loaded MLO, u-boot.bin, uImage, uImage.bin for C4, and extracted the image created on the angstrom website on partition 2
  769. [15:01:03] * jconnoll1 (~jconnolly@firebug.buglabs.net) Quit (Ping timeout: 248 seconds)
  770. [15:01:57] * jconnolly (~jconnolly@firebug.buglabs.net) has joined #beagle
  771. [15:03:46] * harbaum (~harbaum@i59F79239.versanet.de) has joined #beagle
  772. [15:03:52] * alancam_ (~a-campbel@nat/ti/x-opgffppshdtennsi) Quit (Ping timeout: 240 seconds)
  773. [15:06:53] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Ping timeout: 265 seconds)
  774. [15:08:00] * cmurillo (~cmurillo@201.196.107.110) has joined #beagle
  775. [15:12:23] * alancam (~a-campbel@nat/ti/x-janjvtvynkutmpod) has joined #beagle
  776. [15:13:06] * jkridner1 (~a0321898@nat/ti/x-ltkocwpaswqmxcov) Quit (Remote host closed the connection)
  777. [15:13:43] * jpirko (~jirka@nat/redhat/x-awiqsdobmxhqzrgv) Quit (Quit: Leaving)
  778. [15:15:41] * _don_ (~don@nat/ti/x-mdwqubtzobrdruvw) has joined #beagle
  779. [15:16:11] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  780. [15:16:28] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Client Quit)
  781. [15:16:49] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  782. [15:17:10] * Fil_ (bc3d02df@gateway/web/freenode/ip.188.61.2.223) has joined #beagle
  783. [15:17:55] * jkridner1 (~a0321898@nat/ti/x-fjemjollvqhoclqu) has joined #beagle
  784. [15:17:58] * niclas_ (~niclas@nat/ti/x-avzmdkzstzufsmuc) Quit ()
  785. [15:18:10] * niclas_ (~niclas@nat/ti/x-mdsgwqsqotflzfcf) has joined #beagle
  786. [15:18:21] <Fil_> hi
  787. [15:20:32] * _don_ (~don@nat/ti/x-mdwqubtzobrdruvw) Quit (Client Quit)
  788. [15:20:53] * _don_ (~don@nat/ti/x-mfaseuoxutrbeszv) has joined #beagle
  789. [15:21:45] <av500> koen: i admire at what length people will just go on just to prevent google from eating all their datas
  790. [15:21:58] <koen> yes
  791. [15:22:18] * jayabharath (~a0866114@nat/ti/x-eojyizivptbdehgw) has joined #beagle
  792. [15:22:42] * Fil_ (bc3d02df@gateway/web/freenode/ip.188.61.2.223) Quit (Ping timeout: 252 seconds)
  793. [15:23:07] <woglinde> I dont use gmail
  794. [15:23:17] <woglinde> or calendar stuff
  795. [15:23:35] <av500> woglinde: some people dont even use the search feature...
  796. [15:24:35] <koen> that's where the 'is lycos down' joke stems from
  797. [15:24:57] * koen looks at http://pp3dp.com/
  798. [15:25:05] * Fil_ (bc3d02df@gateway/web/freenode/ip.188.61.2.223) has joined #beagle
  799. [15:25:16] <koen> funny how chinese company websites never ever tell the truth
  800. [15:25:20] <woglinde> av500 is bingo better?
  801. [15:25:25] <Fil_> can some1 point me the link to updating the beagleboard loader?
  802. [15:25:34] <koen> some of their 'samples' where printed on high end stratasys or z-corp machines
  803. [15:25:39] <woglinde> fil google didnt help?
  804. [15:25:48] <koen> Fil_: have you tried the links on beagleboard.org?
  805. [15:25:59] <koen> or read http://www.angstrom-distribution.org/demo/beagleboard/ ?
  806. [15:26:15] <av500> koen: portable is cool if you go to a coffee bar and they are out of cups....
  807. [15:27:13] <Fil_> link doesnt work for me
  808. [15:27:30] <Fil_> wait, it seems to be just very slow
  809. [15:27:55] <Fil_> so is that going to update the loader so that I dont have to keep pressing the button anymore to load from sd card?
  810. [15:28:45] <woglinde> yes
  811. [15:31:06] * Doppelfrog_ (~chatzilla@87.114.99.211.plusnet.thn-ag2.dyn.plus.net) has joined #beagle
  812. [15:34:25] * Doppelfrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Ping timeout: 265 seconds)
  813. [15:34:34] * Doppelfrog_ is now known as Doppelfrog
  814. [15:42:39] * alancam (~a-campbel@nat/ti/x-janjvtvynkutmpod) Quit (Ping timeout: 248 seconds)
  815. [15:42:55] * Proxyles (~henrik@c-f893e255.56-4-64736c14.cust.bredbandsbolaget.se) Quit (Remote host closed the connection)
  816. [15:48:22] * torez (~torez@cpe-70-123-142-200.austin.res.rr.com) has joined #beagle
  817. [15:49:50] * Fil_ (bc3d02df@gateway/web/freenode/ip.188.61.2.223) Quit (Ping timeout: 252 seconds)
  818. [15:52:31] * emeb (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  819. [15:53:21] * awozniak (~awozniak@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) has joined #beagle
  820. [15:53:38] * djlewis (~djlewis@75.15.67.41) Quit (Quit: Leaving.)
  821. [15:53:54] * alancam (~a-campbel@nat/ti/x-xodfgaruizujjwxf) has joined #beagle
  822. [15:58:34] * alancam (~a-campbel@nat/ti/x-xodfgaruizujjwxf) Quit (Remote host closed the connection)
  823. [15:58:36] * khasim (~a0393720@192.163.20.231) Quit (Quit: Leaving.)
  824. [15:58:43] * AreaScout (5a9257b1@gateway/web/freenode/ip.90.146.87.177) has joined #beagle
  825. [15:58:47] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  826. [15:59:11] <AreaScout> hi topfs2 :)
  827. [15:59:41] <topfs2> hi?
  828. [15:59:50] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  829. [16:00:11] <AreaScout> found out just yesterday that xbmc runs on beagleboard
  830. [16:00:35] <AreaScout> are the problems with playing movies solved ?
  831. [16:00:43] <topfs2> ah yeah, still needs some stuff to get fluid
  832. [16:00:50] <buZz> xbmc runs on a lot of software
  833. [16:00:52] <topfs2> latest branch playes 480p bunny rather good
  834. [16:00:55] <buZz> ehr, hardware
  835. [16:01:07] <AreaScout> i know :)
  836. [16:01:37] <AreaScout> sound good :)
  837. [16:02:10] <AreaScout> what borad rev do you use ?
  838. [16:03:30] * franktango (~a0746747@nat/ti/x-sniomyooqncvqmpf) has left #beagle
  839. [16:03:50] <AreaScout> usb 2-2: USB disconnect, address 2 <---- this *ucks
  840. [16:08:19] <koen> I need to talk to my internet backup service
  841. [16:08:33] <koen> they split it into a gazillion rars
  842. [16:09:55] * torez (~torez@cpe-70-123-142-200.austin.res.rr.com) Quit (Ping timeout: 276 seconds)
  843. [16:11:13] <AreaScout> is someone familiar with this error ? usb_id[97]: unable to access '/devices/platform/ehci-omap.0/usb2/2-2/2-2.4'
  844. [16:11:52] <AreaScout> comes right after udev starts
  845. [16:13:03] <koen> c3?
  846. [16:14:44] <AreaScout> no c4
  847. [16:15:27] <AreaScout> and latest angstrom
  848. [16:16:41] * alancam (~a-campbel@nat/ti/x-yywukxdljsdxizzc) has joined #beagle
  849. [16:16:49] <AreaScout> uimage starts usb host just fine, keyboard an mouse is working, after udev start, i got USB Disconnect and this errors from above
  850. [16:18:22] <koen> never seen it
  851. [16:18:53] <av500> powered hub?
  852. [16:19:17] <AreaScout> ok, with stable 2009 it worked out of the box :(
  853. [16:22:51] * torez (~torez@cpe-70-123-142-200.austin.res.rr.com) has joined #beagle
  854. [16:23:12] <AreaScout> av500, yes powered hub
  855. [16:23:38] <AreaScout> i will try diverent uimage now
  856. [16:24:11] * eFfeM (~frans@j200125.upc-j.chello.nl) has joined #beagle
  857. [16:24:57] <koen> AreaScout: give http://dominion.thruhere.net/koen/OE/uImage-2.6.32-r80+gitra6bad4464f985fdd3bed72e1b82dcbfc004d7869-beagleboard.multi-config-cpuidle.bin a try
  858. [16:25:02] <avalerion> Still can't figure out this " "/bin/sh: can't access tty; job control turned off" error... is there a problem with my Angstrom files?
  859. [16:25:19] <AreaScout> pfffff thanks god :) with r74 of uimage it works
  860. [16:25:35] <AreaScout> ops r72
  861. [16:25:43] <AreaScout> latest is r84
  862. [16:26:17] <AreaScout> thx koen
  863. [16:27:46] * pepere (52faa0a4@gateway/web/freenode/ip.82.250.160.164) Quit (Quit: Page closed)
  864. [16:28:24] <prpplague> avalerion: that error simply means that the /bin/sh was started without a controlling TTY
  865. [16:28:45] <prpplague> avalerion: it is more of a warning than an error
  866. [16:28:56] * dougztr (~dougztr__@pa-67-234-8-226.dhcp.embarqhsd.net) has joined #beagle
  867. [16:29:42] * mrc3_ (~mrc3@nat/ti/x-vzwqpkbflxezgsrh) Quit (Remote host closed the connection)
  868. [16:30:08] * woglinde (~henning@p5DDC161B.dip.t-dialin.net) Quit (Quit: zapp)
  869. [16:30:11] * mrc3_ (~mrc3@nat/ti/x-juuoagtowvfzuqsp) has joined #beagle
  870. [16:31:19] * Entasis (~Jarred@ppp118-210-10-169.lns20.adl2.internode.on.net) Quit (Quit: Leaving)
  871. [16:31:47] <topfs2> btw AreaScout opkg install xbmc if you want trunk (not my changes)
  872. [16:32:04] <av500> topfs2: who want you changes :)
  873. [16:32:09] <av500> +'d
  874. [16:32:12] <AreaScout> :)
  875. [16:32:13] <av500> +r
  876. [16:32:25] <AreaScout> thx topfs2
  877. [16:32:29] <av500> they dont reach 100fps...
  878. [16:32:58] <topfs2> hehe :)
  879. [16:33:50] <topfs2> They do however almost double fps of the default skin :)
  880. [16:34:21] <AreaScout> koen, btw. your r80 is also working :)
  881. [16:35:01] <AreaScout> what is the diff in this uimage or is it an default one ?
  882. [16:35:52] * ant_work (~chatzilla@host214-85-static.34-85-b.business.telecomitalia.it) has left #beagle
  883. [16:36:11] <AreaScout> topfs2 what is the 'default' resolution on beagleboard for xbmc ?
  884. [16:36:31] <AreaScout> with best performance
  885. [16:36:36] <topfs2> I use it at 720p but its sluggish as hell
  886. [16:36:52] <AreaScout> ok, will give it a try
  887. [16:36:53] <topfs2> Anything more than 480p is not recommended, still even that is slow
  888. [16:37:12] <topfs2> Working on a skin that would hopefully work good in 720p though
  889. [16:37:41] <AreaScout> good ! :)
  890. [16:37:56] <AreaScout> is the omapfb accelerated ?
  891. [16:39:01] <topfs2> my branch uses the overlay yes
  892. [16:39:02] <topfs2> trunk does not
  893. [16:39:15] <kerute> is there any reason my usb port seems to be disabled ?
  894. [16:39:42] <kerute> i updated my xloader and uboot on rev c4 bb
  895. [16:43:59] <AreaScout> topfs2, how do you switch the overlay in runtime ? like enable s-video a.s.o ?
  896. [16:44:36] <AreaScout> it's just to write 1 to the 'enable' file ?
  897. [16:44:43] <topfs2> I just use the vid0 of DSS werever it may be configured
  898. [16:44:46] * katie is now known as katier
  899. [16:45:05] <AreaScout> ok :)
  900. [16:45:09] <topfs2> as I understand it that would mean if its configured on s-video there is were the movie will end up
  901. [16:45:31] <AreaScout> ahh ok
  902. [16:47:20] <AreaScout> do you have to switch also the fb0 resolution and timings ?
  903. [16:47:35] <AreaScout> or are the just standart
  904. [16:49:02] <AreaScout> because on s-video i allways have a small shadow next to the text ( not tryed on xbmc yet )
  905. [16:51:29] <topfs2> uhm, I wish I had an answer on that :) with the DSS and such I'm really lost still. trying to understand it but ain't quite there yet :)
  906. [16:51:37] <av500> AreaScout: shadow?
  907. [16:51:46] <topfs2> you have to switch fb0 to what you want xbmc to be though
  908. [16:54:36] <AreaScout> yep shadow, same text but diff color
  909. [16:54:53] * amitk is now known as amitk-afk
  910. [16:55:58] <AreaScout> topfs2 no i meant for s-video, is the resolution a default one or correspont it to the one for dvi
  911. [16:56:41] <topfs2> AreaScout, I try to set it up to the one on DVI
  912. [16:57:18] <AreaScout> maybe my video cable is to long and thats the reason where the shadow belongs to :D
  913. [16:57:42] <AreaScout> 10 meters :)
  914. [16:58:08] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Quit: Leaving)
  915. [16:59:16] * cody (~cody@dslb-084-056-111-153.pools.arcor-ip.net) Quit (Quit: leaving)
  916. [16:59:37] * hrw is now known as hrw|gone
  917. [17:00:52] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) Quit (Remote host closed the connection)
  918. [17:04:14] * khasim (~a0393720@192.163.20.231) has joined #beagle
  919. [17:06:44] * emeb (~ericb@ip72-223-81-194.ph.ph.cox.net) Quit (Ping timeout: 265 seconds)
  920. [17:07:48] * naeg (~naeg@194.208.239.170) has joined #beagle
  921. [17:07:56] * XorA is now known as XorA|gone
  922. [17:09:18] * jevin (~jevin@cparch14.ecn.purdue.edu) Quit (Remote host closed the connection)
  923. [17:14:44] * signal11 (esteban@gnv.quaddro.net) Quit (Read error: Operation timed out)
  924. [17:15:13] * jevin (~jevin@c-24-13-122-71.hsd1.in.comcast.net) has joined #beagle
  925. [17:18:18] * signal11 (esteban@gnv.quaddro.net) has joined #beagle
  926. [17:24:34] * cody (~cody@dslb-084-056-111-153.pools.arcor-ip.net) has joined #beagle
  927. [17:25:19] <jamuraa> I'm having issues getting USB to work when I rebuilt from the angstrom OE on my bb C4.. It boots up but doesn't recognize my usb hub
  928. [17:27:49] <avalerion> prpplague: after that warning, i just get a blinking prompt and it seems to stop loading
  929. [17:29:40] <prpplague> avalerion: what are you expecting it to do?
  930. [17:29:48] <prpplague> avalerion: which rootfs image did you load?
  931. [17:30:33] <AreaScout> use the uimage r74 from http://www.angstrom-distribution.org/demo/beagleboard/ power on our beagle C4 with no SD card in, then plug card in and press reset
  932. [17:31:07] <AreaScout> thats how it worked for me
  933. [17:33:24] * prpplague looks
  934. [17:33:29] <AreaScout> ops r72 -> again :)
  935. [17:34:04] * sakoman_ (~sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) has joined #beagle
  936. [17:34:51] * sakoman (~sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) Quit (Ping timeout: 264 seconds)
  937. [17:39:53] * fraz_ (~fraz@12.233.153.4) has joined #beagle
  938. [17:40:13] * fraz_ (~fraz@12.233.153.4) has left #beagle
  939. [17:43:37] <koen> topfs2: did xbmc people move to blizzard? http://games.slashdot.org/story/10/08/02/1251203/Is-StarCraft-II-Killing-Graphics-Cards
  940. [17:43:55] <prpplague> hehe
  941. [17:44:38] <topfs2> lol
  942. [17:45:01] <topfs2> how can people complain to blizzard though, its clearly not their fault the card is badly designed
  943. [17:45:11] <topfs2> (ofcourse, displaying something static at silly fps is a stupid idea)
  944. [17:45:59] <avalerion> prpplague: not sure, but i used the angstrom builder tool
  945. [17:46:31] <prpplague> avalerion: you mean the online builder?
  946. [17:46:36] <avalerion> yes
  947. [17:48:02] <prpplague> avalerion: ok so which file system option did you choose?
  948. [17:48:10] <avalerion> i used the simple setup
  949. [17:50:03] <prpplague> avalerion: i'm having trouble accessing the angstrom website atm, but iirc there is an option to choose which type of rootfs you want to build and it sounds like you just requested the minimal root filesystem
  950. [17:50:18] * emeb (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  951. [17:50:55] <avalerion> i did simple with X11 & GNOME
  952. [17:51:06] * Vu (4a07bf42@gateway/web/freenode/ip.74.7.191.66) has joined #beagle
  953. [17:51:32] <Vu> Hello Guys
  954. [17:51:36] <avalerion> should i go advanced?
  955. [17:51:37] * Doppelfrog (~chatzilla@87.114.99.211.plusnet.thn-ag2.dyn.plus.net) Quit (Ping timeout: 276 seconds)
  956. [17:51:58] * Doppelfrog (~chatzilla@87.115.153.134) has joined #beagle
  957. [17:52:00] <prpplague> avalerion: i'd double check the info/instructions for narcissus
  958. [17:52:06] <prpplague> Vu: greetings earthling
  959. [17:52:37] <avalerion> prpplague: i was able to build a previous version that worked, but the GUI wasn't present... i forgot to include GNOME
  960. [17:53:06] <Vu> Could anyone tell me why i can't plug in a USB keyboard or mouse directly to the USB 2.0 HOST?
  961. [17:53:43] <avalerion> you need a hub... not sure why, but i had the same issue
  962. [17:53:45] <adj> usb host on beagle can't handle low & full speed devices
  963. [17:54:03] <adj> it only knows how to deal with high speed things
  964. [17:54:03] <Vu> i see
  965. [17:54:13] <prpplague> Vu: the usb host on the beagle only has EHCI support, no OHCI companion
  966. [17:54:24] <prpplague> Vu: which means you can only plug in high speed devices
  967. [17:54:28] <GrueMaster> Vu: It could simply be due to power. How and how much power you are supplying to the system has a lot to do with it.
  968. [17:54:31] <Vu> i see
  969. [17:54:46] <prpplague> Vu: plug in a high speed USB hub, which then can handle the full and low speed devices
  970. [17:55:20] <Vu> i see
  971. [17:56:56] <Vu> is that because of the transceiver or the Omap ?
  972. [18:00:29] <Vu> Thanks for the help guys
  973. [18:00:45] <prpplague> Vu: both the OMAP3 and the PHY have the capabilities of working with multiple speeds, however due to trade off's in speed, cost, and overall performance it is easier to support only hight speed
  974. [18:05:06] <Vu> Thanks for your help
  975. [18:06:03] <prpplague> np
  976. [18:15:17] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Quit: Up and at 'em, Atom Ant!)
  977. [18:17:38] * dougztr (~dougztr__@pa-67-234-8-226.dhcp.embarqhsd.net) Quit (Quit: Leaving)
  978. [18:18:03] * dougztr (~dougztr__@2001:4830:16e9:0:95de:ecd5:6d26:d49) has joined #beagle
  979. [18:21:10] * kunguz (~Kaan@212.175.32.130) has joined #beagle
  980. [18:21:28] <koen> prpplague: I'm presenting at ELC-E as well, so we should be able to squeeze in a beer or two :)
  981. [18:21:42] <prpplague> koen: dandy
  982. [18:21:51] * prpplague checks the presentation list
  983. [18:22:36] <prpplague> koen: dandy
  984. [18:23:06] * rodrigo_golive (~rodrigo_g@nat/mandriva/x-rbyfjfzziypftiej) Quit (Ping timeout: 265 seconds)
  985. [18:23:15] * prpplague still needs to get with koen about a minimal board-bringup recipe for OE
  986. [18:24:35] * drinkcat (~nicolas@119.56.3.26) Quit (Ping timeout: 240 seconds)
  987. [18:28:30] * Doppelfrog (~chatzilla@87.115.153.134) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.8/20100722155716])
  988. [18:30:31] * Crofton (~balister@pool-96-240-180-89.ronkva.east.verizon.net) Quit (Quit: Leaving)
  989. [18:32:40] * cody (~cody@dslb-084-056-111-153.pools.arcor-ip.net) Quit (Quit: leaving)
  990. [18:35:01] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Quit: L?mnar)
  991. [18:35:11] * PBansal (~pbansal@nat/ti/x-dhksdasaprfnisqb) has joined #beagle
  992. [18:37:05] <kblin> hmm, I wonder if there's a watertight display with enough space in the case to fit a beagle
  993. [18:37:24] <kblin> I'd like a whirlpool-proof tablet :)
  994. [18:46:46] * naeg (~naeg@194.208.239.170) Quit (Quit: WeeChat 0.3.2)
  995. [18:46:50] * rodrigo_golive (~rodrigo_g@nat/mandriva/x-opgpotiunvvmulue) has joined #beagle
  996. [18:49:05] * dl9pf (~quassel@p5B212887.dip.t-dialin.net) has joined #beagle
  997. [18:49:05] * dl9pf (~quassel@p5B212887.dip.t-dialin.net) Quit (Changing host)
  998. [18:49:05] * dl9pf (~quassel@opensuse/member/dl9pf) has joined #beagle
  999. [18:50:46] * dl9pf_ (~quassel@p5B212356.dip.t-dialin.net) Quit (Ping timeout: 276 seconds)
  1000. [18:52:53] * RoHS (~RoHS@68-64-214-18.static.forethought.net) Quit (Quit: RoHS)
  1001. [18:53:24] * KosiNuss (~tom@p549203B8.dip0.t-ipconnect.de) has joined #beagle
  1002. [18:53:39] * dougztr (~dougztr__@2001:4830:16e9:0:95de:ecd5:6d26:d49) Quit (Quit: Moo)
  1003. [19:06:03] * neo01124 (~neo@122.163.103.84) Quit (Remote host closed the connection)
  1004. [19:15:03] * kunguz (~Kaan@212.175.32.130) Quit (Remote host closed the connection)
  1005. [19:15:37] * sjhill (~sjhill@home.bethel-hill.org) Quit (Quit: leaving)
  1006. [19:17:00] * prpplague (~danders@nat/ti/x-ynoohboueynqjyai) Quit (Ping timeout: 240 seconds)
  1007. [19:18:36] * prpplague (~danders@nat/ti/x-zrfbbhxzpyeszwao) has joined #beagle
  1008. [19:18:45] * ZeZu (~null-dev@in-67-236-196-97.dhcp.embarqhsd.net) has joined #beagle
  1009. [19:19:51] * cody (~cody@dslb-084-056-111-153.pools.arcor-ip.net) has joined #beagle
  1010. [19:21:19] * torez (~torez@cpe-70-123-142-200.austin.res.rr.com) Quit (Quit: Leaving)
  1011. [19:25:01] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Quit: leaving)
  1012. [19:25:09] * avalerion (~avalerion@pool-71-185-163-17.phlapa.fios.verizon.net) Quit (Quit: avalerion)
  1013. [19:33:53] * guillaum1 (~Guillaume@AMontsouris-153-1-39-159.w90-2.abo.wanadoo.fr) has joined #beagle
  1014. [19:34:43] * nerxgas (~fatboy@adsl-69-227-215-190.dsl.scrm01.pacbell.net) has joined #beagle
  1015. [19:35:04] * cody (~cody@dslb-084-056-111-153.pools.arcor-ip.net) Quit (Quit: leaving)
  1016. [19:37:22] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
  1017. [19:37:49] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Client Quit)
  1018. [19:51:10] * cody (~cody@dslb-084-056-111-153.pools.arcor-ip.net) has joined #beagle
  1019. [19:57:28] * harbaum (~harbaum@i59F79239.versanet.de) Quit (Ping timeout: 240 seconds)
  1020. [19:59:35] * rcranetx (~rcranetx@nat/ti/x-jbhswpheimshuoib) Quit (Quit: Leaving.)
  1021. [20:03:22] * jayabharath (~a0866114@nat/ti/x-eojyizivptbdehgw) has left #beagle
  1022. [20:03:24] * mchua is now known as mchua_afk
  1023. [20:03:58] * cecil_lincher (~clincher@pool-173-63-77-209.nwrknj.fios.verizon.net) has joined #beagle
  1024. [20:04:28] * amitk-afk (~amit@a91-154-124-12.elisa-laajakaista.fi) Quit (Quit: leaving)
  1025. [20:06:39] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  1026. [20:07:33] * ddd_ (8bb3874f@gateway/web/freenode/ip.139.179.135.79) has joined #beagle
  1027. [20:09:19] <ddd_> has somebody tried the video_copy example of Codec engine? why "out.dat" is not identical with "in.dat" after x1000?
  1028. [20:11:56] <koen> is it scaling?
  1029. [20:14:10] * RobotGrrl (~RobotGrrl@bas2-montreal50-2925251763.dsl.bell.ca) has joined #beagle
  1030. [20:14:11] * RobotGrrl (~RobotGrrl@bas2-montreal50-2925251763.dsl.bell.ca) Quit (Excess Flood)
  1031. [20:14:28] <ddd_> there is nothing after 0x1000 of out.dat, however, it has same size(131072) with in.dat.
  1032. [20:15:01] * RobotGrrl (~RobotGrrl@bas2-montreal50-2925251763.dsl.bell.ca) has joined #beagle
  1033. [20:15:01] <ddd_> i am trying ce_2_25_16
  1034. [20:15:29] * Guest94853 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 245 seconds)
  1035. [20:17:22] * KosiNuss (~tom@p549203B8.dip0.t-ipconnect.de) Quit (Quit: Leaving)
  1036. [20:18:22] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) has joined #beagle
  1037. [20:21:03] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 264 seconds)
  1038. [20:24:47] * pting (~pting@adsl-99-32-245-41.dsl.lsan03.sbcglobal.net) has joined #beagle
  1039. [20:28:20] * RoHS (~RoHS@68-64-214-18.static.forethought.net) has joined #beagle
  1040. [20:28:35] * rodrigo_golive (~rodrigo_g@nat/mandriva/x-opgpotiunvvmulue) Quit (Read error: Connection reset by peer)
  1041. [20:29:34] * ceyusa (~vjaquez@95.61.238.167) has joined #beagle
  1042. [20:30:28] * jconnolly (~jconnolly@firebug.buglabs.net) Quit (Ping timeout: 260 seconds)
  1043. [20:30:58] * rodrigo_golive (~rodrigo_g@nat/mandriva/x-sijmtitfhyuxawje) has joined #beagle
  1044. [20:32:51] * rodrigo_golive (~rodrigo_g@nat/mandriva/x-sijmtitfhyuxawje) Quit (Read error: Connection reset by peer)
  1045. [20:35:23] * jconnolly (~jconnolly@firebug.buglabs.net) has joined #beagle
  1046. [20:36:31] * peksha (~peksha@11.54.broadband2.iol.cz) Quit (Quit: Leaving.)
  1047. [20:37:34] * kunguz (~Kaan@212.156.122.30) has joined #beagle
  1048. [20:38:14] * kunguz (~Kaan@212.156.122.30) Quit (Remote host closed the connection)
  1049. [20:39:17] * rcranetx (~rcranetx@nat/ti/x-hucathohqowjxgmo) has joined #beagle
  1050. [20:45:44] * ddd_ (8bb3874f@gateway/web/freenode/ip.139.179.135.79) Quit (Ping timeout: 252 seconds)
  1051. [20:51:43] * kunguz (~Kaan@212.156.122.30) has joined #beagle
  1052. [20:54:46] * ant___ (~andrea@host11-225-dynamic.58-82-r.retail.telecomitalia.it) has joined #beagle
  1053. [20:58:40] * rcranetx (~rcranetx@nat/ti/x-hucathohqowjxgmo) Quit (Quit: Leaving.)
  1054. [21:01:59] * gustavoz (~gustavoz@host5.201-253-237.telecom.net.ar) Quit (Quit: Leaving)
  1055. [21:03:09] * Mike (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  1056. [21:03:29] * maria (~mrodrigue@186.4.15.155) has joined #beagle
  1057. [21:03:34] * Mike is now known as Guest26100
  1058. [21:07:00] * AreaScout (5a9257b1@gateway/web/freenode/ip.90.146.87.177) Quit (Ping timeout: 252 seconds)
  1059. [21:07:39] * jconnolly (~jconnolly@firebug.buglabs.net) Quit (Ping timeout: 240 seconds)
  1060. [21:14:23] * jconnolly (~jconnolly@firebug.buglabs.net) has joined #beagle
  1061. [21:20:16] <eFfeM> koen, is therer an issue with the angstrom site? opkg update seems to take ages
  1062. [21:20:57] <koen> linuxtogo raid is broken again
  1063. [21:21:36] <eFfeM> ah ok, wanted to do some tests for drinkcat but needed some packages, guess I need to build them myself
  1064. [21:26:14] * eFfeM (~frans@j200125.upc-j.chello.nl) Quit (Quit: Leaving.)
  1065. [21:32:41] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  1066. [21:33:39] * jconnolly (~jconnolly@firebug.buglabs.net) Quit (Ping timeout: 264 seconds)
  1067. [21:33:47] * jconnolly (~jconnolly@acct-342343.voice.dsl.net) has joined #beagle
  1068. [21:33:47] * jconnolly is now known as jconnolly|away
  1069. [21:39:11] * prpplague (~danders@nat/ti/x-zrfbbhxzpyeszwao) Quit (Quit: Leaving)
  1070. [21:41:59] * mrcan (~harika@88.246.222.164) has joined #beagle
  1071. [21:52:51] * mrcan (~harika@88.246.222.164) Quit (Ping timeout: 264 seconds)
  1072. [21:52:52] * KosiNuss (~tom@p549203B8.dip0.t-ipconnect.de) has joined #beagle
  1073. [21:53:02] <RoHS> I want a setup kinda like this for testing. http://www.specialcomp.com/beagleboard/RevC0.htm
  1074. [21:53:19] <RoHS> is there anything else I'll need to get started besides what's in the picture?
  1075. [21:53:25] * mrcan (~harika@88.246.222.164) has joined #beagle
  1076. [21:55:31] <ds2> WuFF WuFF
  1077. [21:55:39] * Gaston|Home (~Gaston@c-b12ee353.155-1-64736c11.cust.bredbandsbolaget.se) has joined #beagle
  1078. [21:59:14] * Redb3ard (~SF0010MAC@lbb-dslst.69616810.amaonline.com) Quit (Quit: Redb3ard)
  1079. [22:06:18] * guillaum1 (~Guillaume@AMontsouris-153-1-39-159.w90-2.abo.wanadoo.fr) Quit (Quit: Leaving.)
  1080. [22:13:46] * gregoiregentil (~gregoire@c-69-181-223-70.hsd1.ca.comcast.net) has joined #beagle
  1081. [22:14:53] * NishanthMenon (~nmenon@nat/ti/x-onqxzghszsgpdxfm) Quit (Quit: Ex-Chat)
  1082. [22:15:59] * gdm (~gdm@190.55.34.222) Quit (Ping timeout: 240 seconds)
  1083. [22:17:53] * ceyusa (~vjaquez@95.61.238.167) Quit (Quit: leaving)
  1084. [22:19:21] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  1085. [22:19:26] <thurbad> RoHS, I would get the wall adapter, rather than the usb powered adapter.. you may also want an rs-232 serial adapter, null serial cable and possibl a usb-serial adapter if your computer doesn't have serial com ports already
  1086. [22:20:19] <thurbad> with the serial stuff you can get into the uboot terminal if needed
  1087. [22:28:21] * PBansal (~pbansal@nat/ti/x-dhksdasaprfnisqb) Quit (Remote host closed the connection)
  1088. [22:38:35] * eAndrius (~andrius@88-222-169-44.meganet.lt) Quit (Quit: Leaving)
  1089. [22:41:14] * Vu (4a07bf42@gateway/web/freenode/ip.74.7.191.66) Quit (Quit: Page closed)
  1090. [22:42:31] * mrcan is now known as mrcan[gaming]
  1091. [22:44:37] * RobotGrrl (~RobotGrrl@bas2-montreal50-2925251763.dsl.bell.ca) Quit (Quit: RobotGrrl)
  1092. [22:46:26] * brijesh (~brijesh@nat/ti/x-bmxpynvmgcqnaoqq) Quit (Quit: Leaving)
  1093. [22:59:48] * kevinsc (~a0214685@nat/ti/x-yfzqtblbihjalgwq) Quit (Ping timeout: 260 seconds)
  1094. [23:06:52] <RoHS> thanks thurbad
  1095. [23:07:09] * gdm (~gdm@190.55.34.222) has joined #beagle
  1096. [23:12:12] * Keyboard_Warrior (~holyduck@ip-82-139-106-77.eidsiva.net) has joined #beagle
  1097. [23:15:08] * theholyduck (~holyduck@77.106.152.132) Quit (Ping timeout: 258 seconds)
  1098. [23:17:38] * ZeZu (~null-dev@in-67-236-196-97.dhcp.embarqhsd.net) Quit (Quit: Leaving.)
  1099. [23:27:36] * robclark (~robclark@nat/ti/x-azmsceszeaogoeaa) Quit (Ping timeout: 265 seconds)
  1100. [23:31:35] * BThompson (~a0193480@nat/ti/x-ppqabxzrgutnfqmx) Quit (Remote host closed the connection)
  1101. [23:32:09] * russ (~russ@206.29.188.233) has joined #beagle
  1102. [23:33:37] * djlewis (~djlewis@75.15.67.41) has joined #beagle
  1103. [23:38:36] * raster (raster@enlightenment/developer/raster) has joined #beagle
  1104. [23:41:59] * rcranetx (~rcranetx@nat/ti/x-fjsezmkdaogmzjdz) has joined #beagle
  1105. [23:42:00] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Read error: Operation timed out)
  1106. [23:44:43] * Redb3ard (~SF0010MAC@75.110.202.83) has joined #beagle
  1107. [23:46:54] * katier (~katierh@nat/ti/x-qejsofoeblsgirsq) Quit ()
  1108. [23:47:35] * duffolonious (~bryan@75-168-87-92.mpls.qwest.net) Quit (Ping timeout: 240 seconds)
  1109. [23:50:00] * jconnolly|away (~jconnolly@acct-342343.voice.dsl.net) Quit (Quit: leaving)
  1110. [23:50:19] * duffolonious (~bryan@75-168-87-92.mpls.qwest.net) has joined #beagle
  1111. [23:55:59] * mrc3_ (~mrc3@nat/ti/x-juuoagtowvfzuqsp) Quit (Ping timeout: 240 seconds)
  1112. [23:56:17] * mrc3_ (~mrc3@nat/ti/x-ttsgweywwufzvfoy) has joined #beagle

These logs were automatically created by BeagleLogBot on irc.freenode.net using the Java IRC LogBot.

See http://microformats.org/wiki/mflogbot for more information.